These make us increase our frequency much more readily, and decrease them only after significant idle time, resulting in a 20% performance increase for nexuiz.
Signed-off-by: Jesse Barnes <[email protected]> --- drivers/gpu/drm/i915/i915_debugfs.c | 27 ++++++++++++++++++++++++++- drivers/gpu/drm/i915/i915_reg.h | 17 +++++++++++++++-- drivers/gpu/drm/i915/intel_display.c | 10 +++++----- 3 files changed, 46 insertions(+), 8 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c index 3601466..0d2614a 100644 --- a/drivers/gpu/drm/i915/i915_debugfs.c +++ b/drivers/gpu/drm/i915/i915_debugfs.c @@ -862,19 +862,44 @@ static int i915_cur_delayinfo(struct seq_file *m, void *unused) u32 gt_perf_status = I915_READ(GEN6_GT_PERF_STATUS); u32 rp_state_limits = I915_READ(GEN6_RP_STATE_LIMITS); u32 rp_state_cap = I915_READ(GEN6_RP_STATE_CAP); + u32 rpstat; + u32 rpupei, rpcurup, rpprevup; + u32 rpdownei, rpcurdown, rpprevdown; int max_freq; /* RPSTAT1 is in the GT power well */ __gen6_force_wake_get(dev_priv); + rpstat = I915_READ(GEN6_RPSTAT1); + rpupei = I915_READ(GEN6_RP_CUR_UP_EI); + rpcurup = I915_READ(GEN6_RP_CUR_UP); + rpprevup = I915_READ(GEN6_RP_PREV_UP); + rpdownei = I915_READ(GEN6_RP_CUR_DOWN_EI); + rpcurdown = I915_READ(GEN6_RP_CUR_DOWN); + rpprevdown = I915_READ(GEN6_RP_PREV_DOWN); + seq_printf(m, "GT_PERF_STATUS: 0x%08x\n", gt_perf_status); - seq_printf(m, "RPSTAT1: 0x%08x\n", I915_READ(GEN6_RPSTAT1)); + seq_printf(m, "RPSTAT1: 0x%08x\n", rpstat); seq_printf(m, "Render p-state ratio: %d\n", (gt_perf_status & 0xff00) >> 8); seq_printf(m, "Render p-state VID: %d\n", gt_perf_status & 0xff); seq_printf(m, "Render p-state limit: %d\n", rp_state_limits & 0xff); + seq_printf(m, "CAGF: %dMHz\n", ((rpstat & GEN6_CAGF_MASK) >> + GEN6_CAGF_SHIFT) * 100); + seq_printf(m, "RP CUR UP EI: %dus\n", rpupei & + GEN6_CURICONT_MASK); + seq_printf(m, "RP CUR UP: %dus\n", rpcurup & + GEN6_CURBSYTAVG_MASK); + seq_printf(m, "RP PREV UP: %dus\n", rpprevup & + GEN6_CURBSYTAVG_MASK); + seq_printf(m, "RP CUR DOWN EI: %dus\n", rpdownei & + GEN6_CURIAVG_MASK); + seq_printf(m, "RP CUR DOWN: %dus\n", rpcurdown & + GEN6_CURBSYTAVG_MASK); + seq_printf(m, "RP PREV DOWN: %dus\n", rpprevdown & + GEN6_CURBSYTAVG_MASK); max_freq = (rp_state_cap & 0xff0000) >> 16; seq_printf(m, "Lowest (RPN) frequency: %dMHz\n", diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 5cfc689..7c58f58 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -3286,15 +3286,28 @@ #define GEN6_RP_DOWN_TIMEOUT 0xA010 #define GEN6_RP_INTERRUPT_LIMITS 0xA014 #define GEN6_RPSTAT1 0xA01C +#define GEN6_CAGF_SHIFT 8 +#define GEN6_CAGF_MASK (0x7f << GEN6_CAGF_SHIFT) #define GEN6_RP_CONTROL 0xA024 #define GEN6_RP_MEDIA_TURBO (1<<11) #define GEN6_RP_USE_NORMAL_FREQ (1<<9) #define GEN6_RP_MEDIA_IS_GFX (1<<8) #define GEN6_RP_ENABLE (1<<7) -#define GEN6_RP_UP_BUSY_MAX (0x2<<3) -#define GEN6_RP_DOWN_BUSY_MIN (0x2<<0) +#define GEN6_RP_UP_IDLE_MIN (0x1<<3) +#define GEN6_RP_UP_BUSY_AVG (0x2<<3) +#define GEN6_RP_UP_BUSY_CONT (0x4<<3) +#define GEN6_RP_DOWN_IDLE_CONT (0x1<<0) #define GEN6_RP_UP_THRESHOLD 0xA02C #define GEN6_RP_DOWN_THRESHOLD 0xA030 +#define GEN6_RP_CUR_UP_EI 0xA050 +#define GEN6_CURICONT_MASK 0xffffff +#define GEN6_RP_CUR_UP 0xA054 +#define GEN6_CURBSYTAVG_MASK 0xffffff +#define GEN6_RP_PREV_UP 0xA058 +#define GEN6_RP_CUR_DOWN_EI 0xA05C +#define GEN6_CURIAVG_MASK 0xffffff +#define GEN6_RP_CUR_DOWN 0xA060 +#define GEN6_RP_PREV_DOWN 0xA064 #define GEN6_RP_UP_EI 0xA068 #define GEN6_RP_DOWN_EI 0xA06C #define GEN6_RP_IDLE_HYSTERSIS 0xA070 diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 3a9fad4..4a173e1 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -6209,18 +6209,18 @@ void gen6_enable_rps(struct drm_i915_private *dev_priv) I915_WRITE(GEN6_RP_INTERRUPT_LIMITS, 18 << 24 | 6 << 16); - I915_WRITE(GEN6_RP_UP_THRESHOLD, 90000); - I915_WRITE(GEN6_RP_DOWN_THRESHOLD, 100000); + I915_WRITE(GEN6_RP_UP_THRESHOLD, 10000); + I915_WRITE(GEN6_RP_DOWN_THRESHOLD, 1000000); I915_WRITE(GEN6_RP_UP_EI, 100000); - I915_WRITE(GEN6_RP_DOWN_EI, 300000); + I915_WRITE(GEN6_RP_DOWN_EI, 5000000); I915_WRITE(GEN6_RP_IDLE_HYSTERSIS, 10); I915_WRITE(GEN6_RP_CONTROL, GEN6_RP_MEDIA_TURBO | GEN6_RP_USE_NORMAL_FREQ | GEN6_RP_MEDIA_IS_GFX | GEN6_RP_ENABLE | - GEN6_RP_UP_BUSY_MAX | - GEN6_RP_DOWN_BUSY_MIN); + GEN6_RP_UP_BUSY_AVG | + GEN6_RP_DOWN_IDLE_CONT); if (wait_for((I915_READ(GEN6_PCODE_MAILBOX) & GEN6_PCODE_READY) == 0, 500)) -- 1.7.1 _______________________________________________ Intel-gfx mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/intel-gfx
