OCNS Consulting wrote:
>
> Thanks for pointing out the leftover library. Now, besides removing/moving
> the remnant library and all of its relations, do I then need to recompile
> the SASL library?
Just removing the library won't help. You'll have to at least relink
the binaries.
Ken
> -----Original Message-----
> From: Ken Murchison [mailto:[EMAIL PROTECTED]]
> Sent: Wednesday, March 20, 2002 7:54 PM
> To: OCNS Consulting
> Cc: [EMAIL PROTECTED]
> Subject: Re: Signaled to Death by 11 - Again - bdb issue?
>
> In your debugger outputs, both lib/libdb-4.0.so and /usr/lib/libdb.so.3
> are being loaded. What is /usr/lib/libdb.so.3? Is this a BDB 3.x
> library? If so, this is probably your problem.
>
> Ken
>
> OCNS Consulting wrote:
> >
> > Ken:
> >
> > Here's ldd output>
> >
> > # ldd /usr/cyrus/bin/imapd
> > libsasl2.so.2 => /usr/local/lib/libsasl2.so.2 (0x40018000)
> > libpthread.so.0 => /lib/i686/libpthread.so.0 (0x40042000)
> > librt.so.1 => /lib/librt.so.1 (0x40057000)
> > libdl.so.2 => /lib/libdl.so.2 (0x40069000)
> > libdb-4.0.so => /usr/local/BerkeleyDB/lib/libdb-4.0.so
> (0x4006d000)
> > libresolv.so.2 => /lib/libresolv.so.2 (0x400fb000)
> > libcom_err.so.3 => /usr/local/lib/libcom_err.so.3 (0x4010e000)
> > libnsl.so.1 => /lib/libnsl.so.1 (0x40110000)
> > libc.so.6 => /lib/i686/libc.so.6 (0x40126000)
> > libgcc_s.so.1 => /usr/local/lib/libgcc_s.so.1 (0x40262000)
> > /lib/ld-linux.so.2 => /lib/ld-linux.so.2 (0x40000000)
> >
> > Okay, now when I attempt to convert /etc/sasldb -> /etc/sasldb2 and
> issue ->
> >
> > # /usr/dist/cyrus-sasl-2.1.1/utils/dbconverter-2 /etc/sasldb
> > /etc/sasldb2.new
> >
> > This program will take the sasldb file specified on the
> > command line and convert it to a new sasldb file in the default
> > location (usually /etc/sasldb). It is STRONGLY RECOMMENDED that
> you
> > backup sasldb before allowing this program to run
> >
> > We are going to convert /etc/sasldb and our output will be in
> > /etc/sasldb2.new
> >
> > Press return to continue
> >
> > Segmentation fault (core dumped)
> >
> > the "lt-dbconverter-2" binary terminates with -> signal 11, Segmentation
> > fault.
> >
> > Here's the traceback from the core:
> >
> > # gdb -core=core -e
> /usr/dist/cyrus-sasl-2.1.1/utils/.libs/lt-dbconverter-2
> > GNU gdb Red Hat Linux (5.1-1)
> > Copyright 2001 Free Software Foundation, Inc.
> > GDB is free software, covered by the GNU General Public License, and you
> are
> > welcome to change it and/or distribute copies of it under certain
> > conditions.
> > Type "show copying" to see the conditions.
> > There is absolutely no warranty for GDB. Type "show warranty" for
> details.
> > This GDB was configured as "i386-redhat-linux".
> >
> > warning: core file may not match specified executable file.
> > Core was generated by `lt-dbconverter-2 /etc/sasldb /etc/sasldb2.new'.
> > Program terminated with signal 11, Segmentation fault.
> > Reading symbols from /lib/libresolv.so.2...done.
> > Loaded symbols for /lib/libresolv.so.2
> > Reading symbols from /usr/local/lib/libsasl2.so.2...done.
> > Loaded symbols for /usr/local/lib/libsasl2.so.2
> > Reading symbols from /lib/libdl.so.2...done.
> > Loaded symbols for /lib/libdl.so.2
> > Reading symbols from /lib/libdb-4.0.so...done.
> > Loaded symbols for /lib/libdb-4.0.so
> > Reading symbols from /lib/i686/libc.so.6...done.
> > Loaded symbols for /lib/i686/libc.so.6
> > Reading symbols from /usr/local/lib/libgcc_s.so.1...done.
> > Loaded symbols for /usr/local/lib/libgcc_s.so.1
> > Reading symbols from /lib/ld-linux.so.2...done.
> > Loaded symbols for /lib/ld-linux.so.2
> > Reading symbols from /usr/lib/sasl2/libsasldb.so.2...done.
> > Loaded symbols for /usr/lib/sasl2/libsasldb.so.2
> > Reading symbols from /usr/lib/sasl2/libcrammd5.so.2...done.
> > Loaded symbols for /usr/lib/sasl2/libcrammd5.so.2
> > Reading symbols from /usr/lib/sasl2/libdigestmd5.so.2...done.
> > Loaded symbols for /usr/lib/sasl2/libdigestmd5.so.2
> > Reading symbols from /lib/libcrypto.so.2...done.
> > Loaded symbols for /lib/libcrypto.so.2
> > Reading symbols from /usr/lib/sasl2/libotp.so.2...done.
> > Loaded symbols for /usr/lib/sasl2/libotp.so.2
> > Reading symbols from /usr/lib/sasl2/libplain.so.2...done.
> > Loaded symbols for /usr/lib/sasl2/libplain.so.2
> > Reading symbols from /lib/libcrypt.so.1...done.
> > Loaded symbols for /lib/libcrypt.so.1
> > Reading symbols from /usr/lib/sasl2/libanonymous.so.2...done.
> > Loaded symbols for /usr/lib/sasl2/libanonymous.so.2
> > Reading symbols from /usr/lib/sasl2/libkerberos4.so.2...done.
> > Loaded symbols for /usr/lib/sasl2/libkerberos4.so.2
> > Reading symbols from /usr/kerberos/lib/libkrb4.so.2...done.
> > Loaded symbols for /usr/kerberos/lib/libkrb4.so.2
> > Reading symbols from /usr/local/kerberos/lib/libkrb5.so.3...done.
> > Loaded symbols for /usr/local/kerberos/lib/libkrb5.so.3
> > Reading symbols from /usr/local/kerberos/lib/libcom_err.so.3...done.
> > Loaded symbols for /usr/local/kerberos/lib/libcom_err.so.3
> > Reading symbols from /usr/local/kerberos/lib/libdes425.so.3...done.
> > Loaded symbols for /usr/local/kerberos/lib/libdes425.so.3
> > Reading symbols from /usr/local/kerberos/lib/libk5crypto.so.3...done.
> > Loaded symbols for /usr/local/kerberos/lib/libk5crypto.so.3
> > Reading symbols from /usr/lib/sasl2/libgssapiv2.so.2...done.
> > Loaded symbols for /usr/lib/sasl2/libgssapiv2.so.2
> > Reading symbols from /usr/local/lib/libgssapi_krb5.so.2...done.
> > Loaded symbols for /usr/local/lib/libgssapi_krb5.so.2
> > Reading symbols from /usr/lib/libdb.so.3...done.
> > Loaded symbols for /usr/lib/libdb.so.3
> > #0 0x00000000 in ?? ()
> > (gdb) bt
> > #0 0x00000000 in ?? ()
> > #1 0x08048bf0 in ?? ()
> > #2 0x08048c84 in ?? ()
> > #3 0x08048fd0 in ?? ()
> > #4 0x40102627 in __libc_start_main (main=0x8048ee0, argc=3,
> > ubp_av=0xbffff1f4, init=0x80487d0, fini=0x8049e30,
> > rtld_fini=0x4000dcc4 <_dl_fini>, stack_end=0xbffff1ec) at
> > ../sysdeps/generic/libc-start.c:129
> > (gdb) q
> >
> > Any ideas?
> >
> > RB
> >
> > -----Original Message-----
> > From: Ken Murchison [mailto:[EMAIL PROTECTED]]
> > Sent: Wednesday, March 20, 2002 5:16 PM
> > To: OCNS Consulting
> > Cc: [EMAIL PROTECTED]
> > Subject: Re: Signaled to Death by 11 - Again -
> >
> > Are you _sure_ that SASL and IMAP and linked against the same version of
> > BDB? Do a 'ldd /usr/cyrus/bin/imapd' and make sure you're not linked
> > against multiple versions of BDB.
> >
> > Was the /etc/sasldb2 file created with the same version?
> >
> > OCNS Consulting wrote:
> > >
> > > Ken:
> > >
> > > Here's the traceback results you requested.
> > >
> > > Let me know how I can help....
> > >
> > > RB
> > >
> > >
> >
> ============================================================================
> > > =========
> > >
> > > # gdb -core=core -e /usr/cyrus/bin/imapd
> > > GNU gdb Red Hat Linux (5.1-1)
> > > Copyright 2001 Free Software Foundation, Inc.
> > > GDB is free software, covered by the GNU General Public License, and you
> > are
> > > welcome to change it and/or distribute copies of it under certain
> > > conditions.
> > > Type "show copying" to see the conditions.
> > > There is absolutely no warranty for GDB. Type "show warranty" for
> > details.
> > > This GDB was configured as "i386-redhat-linux".
> > > Core was generated by `imapd'.
> > > Program terminated with signal 11, Segmentation fault.
> > > Reading symbols from /usr/local/lib/libsasl2.so.2...done.
> > > Loaded symbols for /usr/local/lib/libsasl2.so.2
> > > Reading symbols from /lib/i686/libpthread.so.0...done.
> > >
> > > warning: Unable to set global thread event mask: generic error
> > > [New Thread 1024 (LWP 25676)]
> > > Error while reading shared library symbols:
> > > Cannot enable thread event reporting for Thread 1024 (LWP 25676):
> generic
> > > error
> > > Reading symbols from /lib/librt.so.1...done.
> > > Loaded symbols for /lib/librt.so.1
> > > Reading symbols from /lib/libdl.so.2...done.
> > > Loaded symbols for /lib/libdl.so.2
> > > Reading symbols from /usr/local/BerkeleyDB/lib/libdb-4.0.so...done.
> > > Loaded symbols for /usr/local/BerkeleyDB/lib/libdb-4.0.so
> > > Reading symbols from /lib/libresolv.so.2...done.
> > > Loaded symbols for /lib/libresolv.so.2
> > > Reading symbols from /usr/local/lib/libcom_err.so.3...done.
> > > Loaded symbols for /usr/local/lib/libcom_err.so.3
> > > Reading symbols from /lib/libnsl.so.1...done.
> > > Loaded symbols for /lib/libnsl.so.1
> > > Reading symbols from /lib/i686/libc.so.6...done.
> > > Loaded symbols for /lib/i686/libc.so.6
> > > Reading symbols from /usr/local/lib/libgcc_s.so.1...done.
> > > Loaded symbols for /usr/local/lib/libgcc_s.so.1
> > > Reading symbols from /lib/ld-linux.so.2...done.
> > > Loaded symbols for /lib/ld-linux.so.2
> > > Reading symbols from /usr/lib/sasl2/libsasldb.so.2...done.
> > > Loaded symbols for /usr/lib/sasl2/libsasldb.so.2
> > > Reading symbols from /usr/lib/sasl2/libcrammd5.so.2...done.
> > > Loaded symbols for /usr/lib/sasl2/libcrammd5.so.2
> > > Reading symbols from /usr/lib/sasl2/libdigestmd5.so.2...done.
> > > Loaded symbols for /usr/lib/sasl2/libdigestmd5.so.2
> > > Reading symbols from /lib/libcrypto.so.2...done.
> > > Loaded symbols for /lib/libcrypto.so.2
> > > Reading symbols from /usr/lib/sasl2/libotp.so.2...done.
> > > Loaded symbols for /usr/lib/sasl2/libotp.so.2
> > > Reading symbols from /usr/lib/sasl2/libplain.so.2...done.
> > > Loaded symbols for /usr/lib/sasl2/libplain.so.2
> > > Reading symbols from /lib/libcrypt.so.1...done.
> > > Loaded symbols for /lib/libcrypt.so.1
> > > Reading symbols from /usr/lib/sasl2/libanonymous.so.2...done.
> > > Loaded symbols for /usr/lib/sasl2/libanonymous.so.2
> > > Reading symbols from /usr/lib/sasl2/libkerberos4.so.2...done.
> > > Loaded symbols for /usr/lib/sasl2/libkerberos4.so.2
> > > Reading symbols from /usr/kerberos/lib/libkrb4.so.2...done.
> > > Loaded symbols for /usr/kerberos/lib/libkrb4.so.2
> > > Reading symbols from /usr/local/kerberos/lib/libkrb5.so.3...done.
> > > Loaded symbols for /usr/local/kerberos/lib/libkrb5.so.3
> > > Reading symbols from /usr/local/kerberos/lib/libdes425.so.3...done.
> > > Loaded symbols for /usr/local/kerberos/lib/libdes425.so.3
> > > Reading symbols from /usr/local/kerberos/lib/libk5crypto.so.3...done.
> > > Loaded symbols for /usr/local/kerberos/lib/libk5crypto.so.3
> > > Reading symbols from /usr/lib/sasl2/libgssapiv2.so.2...done.
> > > Loaded symbols for /usr/lib/sasl2/libgssapiv2.so.2
> > > Reading symbols from /usr/local/lib/libgssapi_krb5.so.2...done.
> > > Loaded symbols for /usr/local/lib/libgssapi_krb5.so.2
> > > Reading symbols from /usr/lib/libdb.so.3...done.
> > > Loaded symbols for /usr/lib/libdb.so.3
> > > Reading symbols from /lib/libnss_files.so.2...done.
> > > Loaded symbols for /lib/libnss_files.so.2
> > > #0 0x00000000 in ?? ()
> > > (gdb) bt
> > > #0 0x00000000 in ?? ()
> > > #1 0x4002adb4 in berkeleydb_open (utils=0x81b1740, conn=0x81b0ab8,
> > rdwr=0,
> > > mbdb=0xbfffb754) at db_berkeley.c:92
> > > #2 0x4002af4a in _sasldb_getdata (utils=0x81b1740, context=0x81b0ab8,
> > > auth_identity=0x81b2098 "cyrus1",
> > > realm=0x81b2080 "mailsrv.ocns.com", propName=0x40025d67
> > "userPassword",
> > > out=0xbfffb7f0 "", max_out=8192, out_len=0xbfffb7e4)
> > > at db_berkeley.c:173
> > > #3 0x4002a0d7 in sasldb_auxprop_lookup (glob_context=0x0,
> > > sparams=0x81b01b0, flags=0, user=0x81b14c9 "cyrus1", ulen=6)
> > > at sasldb.c:147
> > > #4 0x4001bd3d in _sasl_auxprop_lookup (sparams=0x81b01b0, flags=0,
> > > user=0x81b14c9 "cyrus1", ulen=6) at auxprop.c:821
> > > #5 0x4001bee9 in _sasl_canon_user (conn=0x81b0ab8, user=0x81b14c9
> > "cyrus1",
> > > ulen=6, flags=1, oparams=0x81b1318) at canonusr.c:181
> > > #6 0x4001c678 in auxprop_verify_password (conn=0x81b0ab8,
> > userstr=0x81a3140
> > > "cyrus1", passwd=0x81b2000 "Password",
> > > service=0x81b0248 "imap", user_realm=0x0) at checkpw.c:158
> > > #7 0x4002493b in _sasl_checkpass (conn=0x81b0ab8, service=0x81b0248
> > "imap",
> > > user=0x81a3140 "cyrus1", pass=0x81b2000 "Password")
> > > at server.c:1485
> > > #8 0x40024a7f in sasl_checkpass (conn=0x81b0ab8, user=0x81a3140
> "cyrus1",
> > > userlen=6, pass=0x81b2000 "Password", passlen=8)
> > > at server.c:1534
> > > #9 0x080516b8 in ?? ()
> > > #10 0x0804ff7d in ?? ()
> > > #11 0x0804eb4c in ?? ()
> > > #12 0x0804d6a9 in ?? ()
> > > #13 0x40142627 in __libc_start_main (main=0x804d060, argc=1,
> > > ubp_av=0xbffff324, init=0x804c130, fini=0x80fdc20,
> > > rtld_fini=0x4000dcc4 <_dl_fini>, stack_end=0xbffff31c) at
> > > ../sysdeps/generic/libc-start.c:129
> > > (gdb) q
> > > #
> >
> > --
> > Kenneth Murchison Oceana Matrix Ltd.
> > Software Engineer 21 Princeton Place
> > 716-662-8973 x26 Orchard Park, NY 14127
> > --PGP Public Key-- http://www.oceana.com/~ken/ksm.pgp
>
> --
> Kenneth Murchison Oceana Matrix Ltd.
> Software Engineer 21 Princeton Place
> 716-662-8973 x26 Orchard Park, NY 14127
> --PGP Public Key-- http://www.oceana.com/~ken/ksm.pgp
--
Kenneth Murchison Oceana Matrix Ltd.
Software Engineer 21 Princeton Place
716-662-8973 x26 Orchard Park, NY 14127
--PGP Public Key-- http://www.oceana.com/~ken/ksm.pgp
