Tim,
Remote bridging over Frame Relay networks is specified in RFC 2427, and
over PPP by RFC 1638. RFC 1638 also contains a good introduction to remote
bridging in general. You should probably also check out IEEE 802.1D (aka
ISO/IEC 15802-3) and 802.1G (aka ISO/IEC 15802-5). The latter two need to
be downloaded from the IEEE (see http://standards.ieee.org/).
Cheers,
Andy
-------
At 11:45 AM 4/17/00 -0500, Timothy Behne wrote:
>Can anyone help point me in the direction of an RFC, draft, or other
>information that might be helpful in sending Ethernet data across a
>slower-speed media (such as in a remote bridge implementation)? For
>instance, sending 100 BaseT Ethernet data across a DS3 link.
>
>Thanks in advance,
>
>Tim Behne
>Tadiran Microwave Networks
>
>-
>This message was passed through [EMAIL PROTECTED], which
>is a sublist of [EMAIL PROTECTED] Not all messages are passed.
>Decisions on what to pass are made solely by Harald Alvestrand.
________________________________________________________________________
Andrew G. Malis [EMAIL PROTECTED] phone:978 952-7414 fax:978 392-2074
Lucent Technologies 1 Robbins Road Westford, MA 01886
