I have a HP 3055 networked with three other Windows computer attached. I am trying to setup a Fedora 6 Server with the scans sent to Server. I have installed HPLIP version 1.7.3 but when I try to connect an hpiod and hssp error occur. I ran hp-check and this is the read out (also I tried hp makeuri with no success):
[EMAIL PROTECTED] Server]# hp-check HP Linux Imaging and Printing System (ver. 1.7.3) Dependency/Version Check Utility ver. 5.3 Copyright (c) 2001-7 Hewlett-Packard Development Company, LP This software comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to distribute it under certain conditions. See COPYING file for more details. --------------- | SYSTEM INFO | --------------- Basic system information: Linux localhost.localdomain 2.6.20-1.2933.fc6 #1 SMP Mon Mar 19 10:42:48 EDT 2007 i686 athlon i386 GNU/Linux Detected distro (/etc/issue): fedora 6 Detected distro (lsb_release): FedoraCore 6 (Zod) Currently installed HPLIP version... HPLIP 1.7.3 currently installed in '/usr/share/hplip'. Current contents of '/etc/hp/hplip.conf' file: # hplip.conf [hpiod] # port=0 (dynamic IP port) port=2208 [hpssd] # port=0 (dynamic IP port) port=2207 [hplip] version=1.7.3 jdprobe=0 [dirs] home=/usr/share/hplip run=/var/run ppd=/usr/share/ppd/HP ppdbase=/usr/share/ppd doc=/usr/share/doc/hplip-1.7.3 # Following values are determined at configure time and cannot be changed. [configure] network-build=1 pp-build=0 gui-build=1 scanner-build=1 fax-build=1 cups11-build=0 installinitd=/usr/lib/lsb/install_initd chkconfig=/sbin/chkconfig internal-tag=1.7.3.14 HPLIP running? No, HPLIP is not running (OK). HPOJ running? No, HPOJ is not running (OK). Checking Python version... OK, version 2.4.4 installed Checking PyQt version... OK, version 3.17 installed. Checking SIP version... OK, Version 4.5 installed ---------------- | DEPENDENCIES | ---------------- Checking for dependency libcrypto - OpenSSL cryptographic library... OK, found. Checking for dependency gcc - GNU Project C and C++ Compiler... OK, found. Checking for dependency SANE - Scanning library... OK, found. Checking for dependency GhostScript - PostScript and PDF language interpreter and previewer... OK, found. Checking for dependency libjpeg - JPEG library... OK, found. Checking for dependency libpthread - POSIX threads library... OK, found. Checking for dependency make - GNU make utility to maintain groups of programs... OK, found. Checking for dependency python-devel - Python development files... OK, found. Checking for dependency Reportlab - PDF library for Python... OK, found. Checking for dependency PyQt - Qt interface for Python... OK, found. Checking for dependency cups-devel- Common Unix Printing System development files... OK, found. Checking for dependency ppdev - Parallel port support kernel module.... error: Not found! This is an OPTIONAL dependency. Some HPLIP functionality may not function properly. Checking for dependency libusb - USB library... OK, found. Checking for dependency scanimage - Shell scanning program... OK, found. Checking for dependency libnetsnmp-devel - SNMP networking library development files... OK, found. Checking for dependency Python 2.2 or greater - Python programming language... OK, found. Checking for dependency LSB - Linux Standard Base support... OK, found. Checking for dependency xsane - Graphical scanner frontend for SANE... OK, found. Checking for dependency cups - Common Unix Printing System... OK, found. Checking for dependency Python 2.3 or greater - Required for fax functionality... OK, found. ---------------------- | INSTALLED PRINTERS | ---------------------- Cups-PDF -------- Device URI: cups-pdf:/ Installed in HPLIP? No PPD: /etc/cups/ppd/Cups-PDF.ppd PPD Description: Generic postscript color printer rev4 Printer status: printer Cups-PDF is idle. enabled since Mon 12 Mar 2007 11:36:12 AM EDT error: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend to function in HPLIP. (You can still print to this printer using another backend and HPIJS.) ---------------------- | SANE CONFIGURATION | ---------------------- 'hpaio' in '/etc/sane.d/dll.conf'... OK, found. SANE backend 'hpaio' is properly set up. Checking output of 'scanimage -L'... No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). Please read the documentation which came with this software (README, FAQ, manpages). --------------------- | PYTHON EXTENSIONS | --------------------- Checking 'cupsext' CUPS extension... OK, found. Checking 'pcardext' Photocard extension... OK, found. 2 errors were detected. Please refer to the installation instructions at: http://hplip.sourceforge.net/install/index.html [EMAIL PROTECTED] Server]# hp-makeuri 10.1.10.26 HP Linux Imaging and Printing System (ver. 1.7.3) Device URI Creation Utility ver. 4.3 Copyright (c) 2001-7 Hewlett-Packard Development Company, LP This software comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to distribute it under certain conditions. See COPYING file for more details. error: Unable to connect to hpiod. [EMAIL PROTECTED] Server]# Robert P.S. I got CUPS to print but I removed it to see if that was preventing the connectiion. Also I removed the firewall and nothing changed _________________________________________________________________ Take a break and play crossword puzzles - FREE! http://games.msn.com/en/flexicon/default.htm?icid=flexicon_ wlmemailtaglinemarch07 ------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys-and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV _______________________________________________ HPLIP-Help mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/hplip-help
