Hi Dave,
Thanks for replying. Here is some more information. I have included system and messages logs ECP is enabled in the BIOS I am not sure how to check how to check Software ECP is available, but I can confirm the modules are loaded as below. dan[~]$ lsmod |grep parport parport_pc 37796 2 parport 39496 3 ppdev,lp,parport_pc dan[~]$ lsmod |grep ppdev ppdev 10500 2 parport 39496 3 ppdev,lp,parport_pc /var/log/system on Ubuntu 6.10 20:47:39 Start 20:48:55 Press "Scan" Immediately CPU 100% At the end I left it running for 20 minutes, the messages repeat themselves. Jan 24 20:47:39 morocco python: hpssd[4108]: warning: Inrecognized URI: parallel:/dev/lp0 Jan 24 20:47:39 morocco kernel: [17208524.736000] ppdev0: registered pardevice Jan 24 20:47:39 morocco kernel: [17208524.756000] ppdev0: negotiated back to compatibility mode because user-space forgot Jan 24 20:47:39 morocco kernel: [17208524.756000] ppdev0: unregistered pardevice Jan 24 20:47:39 morocco kernel: [17208524.840000] ppdev0: registered pardevice Jan 24 20:48:55 morocco xsane: unable to fill data buffer: size=18411: prnt/hpijs/hplip_api.c 450 Jan 24 20:49:25 morocco hpiod: ParDevice::wait_status timeout status=7f mask=88 val=0 us=30000000: io/hpiod/ppdevice.cpp 118 Jan 24 20:49:26 morocco hpiod: ParDevice::wait_status timeout status=df mask=40 val=0 us=1000000: io/hpiod/ppdevice.cpp 118 Jan 24 20:49:57 morocco last message repeated 31 times Jan 24 20:50:11 morocco last message repeated 14 times Jan 24 20:50:11 morocco hpiod: unable to read MlcReverseData header: Success hp:/par/OFFICEJET_PRO_1170C_SERIES?device=/dev/parport0 io/hpiod/mlc.cpp 500 Jan 24 20:50:41 morocco hpiod: ParDevice::wait_status timeout status=7f mask=88 val=0 us=30000000: io/hpiod/ppdevice.cpp 118 Jan 24 20:50:42 morocco hpiod: ParDevice::wait_status timeout status=df mask=40 val=0 us=1000000: io/hpiod/ppdevice.cpp 118 Jan 24 20:51:13 morocco last message repeated 31 times Jan 24 20:51:27 morocco last message repeated 14 times Jan 24 20:51:27 morocco hpiod: unable to read MlcReverseData header: Success hp:/par/OFFICEJET_PRO_1170C_SERIES?device=/dev/parport0 io/hpiod/mlc.cpp 500 Jan 24 20:51:57 morocco hpiod: ParDevice::wait_status timeout status=7f mask=88 val=0 us=30000000: io/hpiod/ppdevice.cpp 118 Jan 24 20:51:58 morocco hpiod: ParDevice::wait_status timeout status=df mask=40 val=0 us=1000000: io/hpiod/ppdevice.cpp 118 Jan 24 20:52:29 morocco last message repeated 31 times Jan 24 20:52:33 morocco last message repeated 4 times Jan 24 20:52:34 morocco saned[9246]: saned (AF-indep+IPv6) from sane-backends 1.0.18 ready Jan 24 20:52:34 morocco saned[9246]: check_host: getpeername failed: Socket operation on non-socket Jan 24 20:52:34 morocco saned[9246]: init: access by host [error] denied Jan 24 20:52:34 morocco saned[9246]: quit: exiting Jan 24 20:52:34 morocco hpiod: ParDevice::wait_status timeout status=df mask=40 val=0 us=1000000: io/hpiod/ppdevice.cpp 118 Jan 24 20:52:43 morocco last message repeated 9 times Jan 24 20:52:43 morocco hpiod: unable to read MlcReverseData header: Success hp:/par/OFFICEJET_PRO_1170C_SERIES?device=/dev/parport0 io/hpiod/mlc.cpp 500 Jan 24 20:52:44 morocco hpiod: ParDevice::wait_status timeout status=df mask=40 val=0 us=1000000: io/hpiod/ppdevice.cpp 118 Jan 24 20:53:15 morocco last message repeated 30 times Jan 24 20:53:30 morocco last message repeated 15 times Jan 24 20:53:30 morocco hpiod: unable to read MlcReverseData header: Success hp:/par/OFFICEJET_PRO_1170C_SERIES?device=/dev/parport0 io/hpiod/mlc.cpp 500 Jan 24 20:53:31 morocco hpiod: ParDevice::wait_status timeout status=df mask=40 val=0 us=1000000: io/hpiod/ppdevice.cpp 118 /var/log/messages Jan 24 19:25:29 morocco -- MARK -- Jan 24 19:26:40 morocco kernel: [17203666.340000] lp0: ECP mode Jan 24 19:37:21 morocco kernel: [17204306.968000] lp0: ECP mode Jan 24 19:53:43 morocco kernel: [17205288.488000] lp0: ECP mode Jan 24 20:05:29 morocco -- MARK -- Jan 24 20:25:30 morocco -- MARK -- Jan 24 20:32:21 morocco kernel: [17207606.420000] lp0: ECP mode Jan 24 20:33:45 morocco kernel: [17207690.356000] lp0 out of paper Jan 24 20:42:49 morocco python: hpssd[4108]: warning: Inrecognized URI: parallel:/dev/lp0 Jan 24 20:43:21 morocco xsane: unable to fill data buffer: size=18411: prnt/hpijs/hplip_api.c 450 Jan 24 20:47:08 morocco python: hpssd[4108]: warning: Inrecognized URI: parallel:/dev/lp0 Jan 24 20:47:09 morocco hpiod: channel cleanup ci=1 Jan 24 20:47:09 morocco hpiod: channel cleanup ci=2 Jan 24 20:47:10 morocco hpiod: device cleanup uri=hp:/par/OFFICEJET_PRO_1170C_SERIES?device=/dev/parport0 Jan 24 20:47:39 morocco python: hpssd[4108]: warning: Inrecognized URI: parallel:/dev/lp0 Jan 24 20:48:55 morocco xsane: unable to fill data buffer: size=18411: prnt/hpijs/hplip_api.c 450 Jan 24 21:05:30 morocco -- MARK -- Jan 24 21:07:28 morocco hpiod: channel cleanup ci=1 Jan 24 21:07:28 morocco hpiod: channel cleanup ci=2 Jan 24 21:07:29 morocco hpiod: device cleanup uri=hp:/par/OFFICEJET_PRO_1170C_SERIES?device=/dev/parport0 Regards Dan Phillips Suffield, David wrote: > I can't tell from the syslog messages if this is the same parallel port > issues I have seen before. There are probably more syslog messages > before the tail that would help determine what is happening. > > The previous parallel port problem was hpiod could not set the parallel > port to software ECP mode. HPLIP only uses Software ECP not Hardware ECP > and ECP is necessary for scanning. Software ECP mode is set via the > ppdev/parport kernel module. If Software ECP mode is not available via > ppdev/parport you may have to check your parallel port bios settings. > > We don't have a OJ 1170, but we will re-test HPLIP with another parallel > port OJ on Ubuntu. > > -dave > > >> -----Original Message----- >> From: [EMAIL PROTECTED] >> [mailto:[EMAIL PROTECTED] On Behalf >> Of Dan Phillips >> Sent: Wednesday, January 24, 2007 9:16 AM >> To: [email protected] >> Subject: [Hplip-help] Resend: Officejet 1170c scanning hangs >> >> I posted this last week. Can anyone help? Tell me to chill if >> I am just being impatient, I can appreciate you guys could be >> busy. I have noticed a few people with similar problems, but >> with no solutions. I willing to put some effort into it, but >> I need some direction. >> >> thanks >> >> Dan >> >> -------------------------------------------------------------- >> ------------- >> Hi everyone, >> >> I am revisiting this problem after a break of some months. >> >> I have an HP Officejet 1170c that hangs whenever I try to >> scan through xsane. Xsane detects it ok and loads up and the >> scanner makes the normal noise. When pressing Preview or Scan >> the CPU hits 100% and stays there. >> >> Here is output of /var/log/messages >> >> dan[~]$ tail -f /var/log/messages >> Jan 18 22:41:39 morocco kernel: [17190202.996000] lp0: ECP >> mode Jan 18 22:41:39 morocco kernel: [17190203.016000] lp0: >> ECP mode Jan 18 22:41:40 morocco kernel: [17190204.328000] >> lp0: ECP mode Jan 18 22:42:33 morocco xsane: unable to fill >> data buffer: size=18411: >> prnt/hpijs/hplip_api.c 450 >> Jan 18 22:45:11 morocco hpiod: channel cleanup ci=1 Jan 18 >> 22:45:11 morocco hpiod: channel cleanup ci=2 Jan 18 22:45:12 >> morocco hpiod: device cleanup >> uri=hp:/par/OFFICEJET_PRO_1170C_SERIES?device=/dev/parport0 >> Jan 18 22:45:12 morocco hpiod: device active clientcnt=1 >> channelcnt=0 >> uri=hp:/par/OFFICEJET_PRO_1170C_SERIES?device=/dev/parport0 >> Jan 18 22:45:14 morocco hpiod: device cleanup >> uri=hp:/par/OFFICEJET_PRO_1170C_SERIES?device=/dev/parport0 >> Jan 18 22:46:14 morocco xsane: unable to fill data buffer: >> size=18411: >> prnt/hpijs/hplip_api.c 450 >> >> Versions: >> >> HP Linux Imaging and Printing System (ver. 1.6.9) Device >> Information Utility ver. 3.4 xsane 0.991 >> >> The scanner used to work with Suse 9.2, but since then I have >> not had it working on any distributions. >> >> Currently I am running Ubuntu 6.10 and Debian Etch both with >> the same results and have tried on other distributions. >> >> Any help would be appreciated. >> >> Kind Regards >> >> Daniel Phillips >> >> >> -------------------------------------------------------------- >> ----------- >> Take Surveys. Earn Cash. Influence the Future of IT Join >> SourceForge.net's Techsay panel and you'll get the chance to >> share your opinions on IT & business topics through brief >> surveys - and earn cash >> http://www.techsay.com/default.php?page=join.php&p=sourceforge >> &CID=DEVDEV >> _______________________________________________ >> HPLIP-Help mailing list >> [email protected] >> https://lists.sourceforge.net/lists/listinfo/hplip-help >> >> ------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys - and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV _______________________________________________ HPLIP-Help mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/hplip-help
