Well everything looks okay. So lets do this:
cd /usr/share/hplip run "ps ax | grep hp" run kill <procID of HPSSD> then run python ./hpssd.py -ldebug -x open another terminal run hp-toolbox -g post the logs from both. A On 1/24/07, Nafeesah Hines, T <[EMAIL PROTECTED]> wrote: > > Sure Aaron. It was working fine, then all of a sudden I got this error. I > have been doing some checking, and the only thing that changed since the > last time it was working is I ran FC6 system updates, and hplip was updated: > > HP Linux Imaging and Printing System (ver. 1.6.12) > Dependency/Version Check Utility ver. 5.2 > > Copyright (c) 2003-6 Hewlett-Packard Development Company, LP > This software comes with ABSOLUTELY NO WARRANTY. > This is free software, and you are welcome to distribute it > under certain conditions. See COPYING file for more details. > > > --------------- > | SYSTEM INFO | > --------------- > > Basic system information: > Linux myoffice 2.6.19-1.2895.fc6 #1 SMP Wed Jan 10 19:28:18 EST 2007 i686 > i686 i386 GNU/Linux > > Detected distro (/etc/issue): > fedora 6 > > Detected distro (lsb_release): > FedoraCore 6 (Zod) > > Currently installed HPLIP version... > HPLIP 1.6.12 currently installed in '/usr/share/hplip'. > > Current contents of '/etc/hp/hplip.conf' file: > # hplip.conf > > [hpiod] > # port=0 (dynamic IP port) > port=2208 > [hpssd] > # port=0 (dynamic IP port) > port=2207 > > [hplip] > version=1.6.12 > jdprobe=0 > > [dirs] > home=/usr/share/hplip > run=/var/run > ppd=/usr/share/foomatic/db/source/PPD/HP > doc=/usr/share/doc/hplip-1.6.12 > > # Following values are determined at configure time and cannot be changed. > [configure] > network-build=1 > pp-build=1 > gui-build=1 > scanner-build=1 > fax-build=1 > installinitd= > chkconfig=/sbin/chkconfig > internal-tag=1.6.12.15 > > > HPLIP running? > Yes, HPLIP is running (OK). > > HPOJ running? > No, HPOJ is not running (OK). > > Checking Python version... > OK, version 2.4.4 installed > > Checking PyQt version... > OK, version 3.16 installed. > > Checking SIP version... > OK, Version 4.4.5 installed > > ---------------- > | DEPENDENCIES | > ---------------- > > > Checking for dependency libcrypto - OpenSSL cryptographic library... > OK, found. > > Checking for dependency gcc - GNU Project C and C++ Compiler... > OK, found. > > Checking for dependency SANE - Scanning library... > OK, found. > > Checking for dependency GhostScript - PostScript and PDF language > interpreter and previewer... > OK, found. > > Checking for dependency libjpeg - JPEG library... > OK, found. > > Checking for dependency libpthread - POSIX threads library... > OK, found. > > Checking for dependency make - GNU make utility to maintain groups of > programs... > OK, found. > > Checking for dependency python-devel - Python development files... > OK, found. > > Checking for dependency Reportlab - PDF library for Python... > OK, found. > > Checking for dependency PyQt - Qt interface for Python... > OK, found. > > Checking for dependency cups-devel- Common Unix Printing System development > files... > OK, found. > > Checking for dependency ppdev - Parallel port support kernel module.... > OK, found. > > Checking for dependency libusb - USB library... > OK, found. > > Checking for dependency scanimage - Shell scanning program... > OK, found. > > Checking for dependency libnetsnmp-devel - SNMP networking library > development files... > OK, found. > > Checking for dependency Python 2.2 or greater - Python programming > language... > OK, found. > > Checking for dependency LSB - Linux Standard Base support... > OK, found. > > Checking for dependency xsane - Graphical scanner frontend for SANE... > OK, found. > > Checking for dependency cups - Common Unix Printing System... > OK, found. > > Checking for dependency Python 2.3 or greater - Required for fax > functionality... > OK, found. > > > ---------------------- > | INSTALLED PRINTERS | > ---------------------- > > > Cups-PDF > -------- > Device URI: cups-pdf:/ > Installed in HPLIP? No > PPD: /etc/cups/ppd/Cups-PDF.ppd > PPD Description: Generic postscript color printer rev4 > Printer status: printer Cups-PDF is idle. enabled since Wed 13 Dec 2006 > 01:30:06 PM EST > > error: Printer is not HPLIP installed. Printers must use the hp: or hpfax: > CUPS backend to function in HPLIP. > > myprinter > ------------ > Device URI: hp:/net/Photosmart_2600_series?ip=192.168.0.4 > Installed in HPLIP? Yes > PPD: /etc/cups/ppd/myprinter.ppd > PPD Description: HP PhotoSmart 2600 Foomatic/hpijs (recommended) > Printer status: printer myprinter is idle. enabled since Fri 15 Dec 2006 > 11:32:02 AM EST > > > myprinter_fax > ---------------- > Device URI: > hpfax:/net/Photosmart_2600_series?ip=192.168.0.4 > Installed in HPLIP? Yes > PPD: /etc/cups/ppd/myprinter_fax.ppd > PPD Description: HP Fax > Printer status: printer myprinter_fax is idle. enabled since Wed 24 Jan > 2007 01:41:30 PM EST > > > > ---------------------- > | SANE CONFIGURATION | > ---------------------- > > 'hpaio' in /etc/sane.d/dll.conf'... > OK, found. SANE backend 'hpaio' is properly set up. > > Checking output of 'scanimage -L'... > device `hpaio:/net/Photosmart_2600_series?ip=192.168.0.4' > is a Hewlett-Packard Photosmart_2600_series all-in-one > > > --------------------- > | PYTHON EXTENSIONS | > --------------------- > > Checking 'cupsext' CUPS extension... > OK, found. > > Checking 'pcardext' Photocard extension... > OK, found. > > > 1 errors were detected. > Please refer to the installation instructions at: > http://hplip.sourceforge.net/install/index.html > > > > > > Aaron wrote: > Can you run hp-check and post the output? > > Thanks. > > A > > On 1/24/07, Nafeesah Hines, T <[EMAIL PROTECTED]> wrote: > > > Hello, > > I am getting the following error when I try to start hp-toolbox. Does > anyone have any ideas about what could be causing it? > > HP Linux Imaging and Printing System (ver. 1.6.12) > HP Device Manager ver. 6.3 > > Copyright (c) 2003-6 Hewlett-Packard Development Company, LP > This software comes with ABSOLUTELY NO WARRANTY. > This is free software, and you are welcome to distribute it > under certain conditions. See COPYING file for more details. > > Traceback (most recent call last): > File "/usr/share/hplip/ui/devmgr4.py", line 700, in > InitialUpdate > self.RescanDevices() > File "/usr/share/hplip/ui/devmgr4.py", line 732, in > RescanDevices > self.DeviceListRefresh() > File "/usr/share/hplip/ui/devmgr4.py", line 1066, in > DeviceListRefresh > self.UpdateDevice() > File "/usr/share/hplip/ui/devmgr4.py", line 827, in > UpdateDevice > self.UpdateHistory() > File "/usr/share/hplip/ui/devmgr4.py", line 1207, in > UpdateHistory > self.cur_device.hist = self.cur_device.queryHistory() > File "/usr/share/hplip/base/device.py", line 1961, in > queryHistory > yr, mt, dy, hr, mi, sec, wd, yd, dst, job, user, ec = > x.strip().split(',', 13) > ValueError: too many values to unpack > > > > ------------------------------------------------------------------------- > Take Surveys. Earn Cash. Influence the Future of IT > Join SourceForge.net's Techsay panel and you'll get the chance to share > your > opinions on IT & business topics through brief surveys - and earn cash > http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV > > _______________________________________________ > HPLIP-Help mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/hplip-help > > > > > > -- I don't care, I'm still free. You can't take the sky from me. - "Firefly" ------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys - and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV _______________________________________________ HPLIP-Help mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/hplip-help
