Aaron,
Thanks for your reply,
full output of hp-align -g follows.
Robin.
[EMAIL PROTECTED]:~$ hp-align -g
HP Linux Imaging and Printing System (ver. 1.6.12)
Printer Cartridge Alignment Utility ver. 2.5
Copyright (c) 2003-6 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
hp-align[5520]: debug: (xmit) Sending data on channel (3)
hp-align[5520]: debug: 'msg=probedevices\nbus=usb\n'
hp-align[5520]: debug: (xmit) Reading data on channel (3)
hp-align[5520]: debug: 'msg=ProbeDevicesResult\nresult-code=0
\nnum-devices=2\nlength=373\ndata:\ndirect
hp:/usb/psc_1100_series?serial=HU41AGP3C1B0 "HP psc 1100 series" "HP psc
1100 series USB HU41AGP3C1B0 HPLIP" "MFG:HP;MDL:psc 1100
series;CLS:PRINTER;DES:psc 1100 series;SN:HU41AGP3C1B0;"\ndirect
hp:/usb/DeskJet_930C?serial=HU11N1G1CBJJ "HP DeskJet 930C" "HP DeskJet
930C USB HU11N1G1CBJJ HPLIP" "MFG:HP;MDL:DeskJet
930C;CLS:PRINTER;DES:DeskJet 930C;SN:HU11N1G1CBJJ;"\n'
hp-align[5520]: debug: hp:/usb/psc_1100_series?serial=HU41AGP3C1B0
hp-align[5520]: debug: Cache miss: psc_1100_series
hp-align[5520]: debug: Reading
file: /usr/share/hplip/data/models/models.dat
hp-align[5520]: debug: Searching for section [psc_1100_series] in
file /usr/share/hplip/data/models/models.dat
hp-align[5520]: debug: Found section [psc_1100_series] in
file /usr/share/hplip/data/models/models.dat
hp-align[5520]: debug: hp:/usb/DeskJet_930C?serial=HU11N1G1CBJJ
hp-align[5520]: debug: Cache miss: deskjet_930c
hp-align[5520]: debug: Reading
file: /usr/share/hplip/data/models/models.dat
hp-align[5520]: debug: Searching for section [deskjet_930c] in
file /usr/share/hplip/data/models/models.dat
hp-align[5520]: debug: Found section [deskjet_930c] in
file /usr/share/hplip/data/models/models.dat
hp-align[5520]: debug: (xmit) Sending data on channel (3)
hp-align[5520]: debug: 'msg=probedevices\nbus=par\n'
hp-align[5520]: debug: (xmit) Reading data on channel (3)
hp-align[5520]: debug: 'msg=ProbeDevicesResult\nresult-code=0
\nnum-devices=0\nlength=0\ndata:\n'
hp-align[5520]: debug: hp:/usb/DeskJet_930C?serial=HU11N1G1CBJJ:
DeskJet_930C
hp-align[5520]: debug: hp:/usb/DeskJet_930C?serial=HU11N1G1CBJJ: DJphoto
hp-align[5520]: debug: hp:/usb/DeskJet_930C?serial=HU11N1G1CBJJ:
GimpPrint_B&W
hp-align[5520]: debug: hp:/usb/DeskJet_930C?serial=HU11N1G1CBJJ:
GimpPrint_colour
hp-align[5520]: debug: hp:/usb/psc_1100_series?serial=HU41AGP3C1B0:
psc_1100
hp-align[5520]: debug: usb://HP/psc%201100%20series?serial=HU41AGP3C1B0:
psc_1110_colour
hp-align[5520]: debug: Exception: 4 (Unknown/invalid device-uri field)
warning: Inrecognized URI: usb://HP/psc%201100%
20series?serial=HU41AGP3C1B0
hp-align[5520]: debug: {'hp:/usb/psc_1100_series?serial=HU41AGP3C1B0':
('psc_1100_series', 'psc_1100_series', ''),
'hp:/usb/DeskJet_930C?serial=HU11N1G1CBJJ': ('DeskJet_930C',
'DeskJet_930C', '')}
hp-align[5520]: debug: [<cupsext.Printer object at 0xb77cc688>,
<cupsext.Printer object at 0xb77cc7f0>, <cupsext.Printer object at
0xb77cc818>, <cupsext.Printer object at 0xb77cc840>, <cupsext.Printer
object at 0xb77d3368>, <cupsext.Printer object at 0xb77d3340>]
Choose device from probed devices connected on bus(es): usb:
Num. Device-URI CUPS
printer(s)
---- -------------------------------------------
---------------------------
0 hp:/usb/psc_1100_series?serial=HU41AGP3C1B0
psc_1100
1 hp:/usb/DeskJet_930C?serial=HU11N1G1CBJJ DeskJet_930C,
DJphoto,
GimpPrint_B&W,
GimpPrint_colour
Enter number 0...1 for device (q=quit) ?1
hp-align[5520]: debug: URI: backend=hp, is_hp=True, bus=usb,
model=DeskJet_930C, serial=HU11N1G1CBJJ, dev=, host=, port=1
hp-align[5520]: debug: Model/UI model: DeskJet_930C/HP Deskjet 930c
hp-align[5520]: debug: hpiod socket: 7
hp-align[5520]: debug: hpssd socket: 8
hp-align[5520]: debug: (xmit) Sending data on channel (8)
hp-align[5520]: debug: 'msg=setalerts\nusername=rg\nemail-from-address=
\nemail-to-addresses=\nemail-alerts=False\n'
hp-align[5520]: debug: (xmit) Reading data on channel (8)
hp-align[5520]: debug: 'msg=setalertsresult\nresult-code=0\n'
hp-align[5520]: debug: Opening device:
hp:/usb/DeskJet_930C?serial=HU11N1G1CBJJ
hp-align[5520]: debug: (xmit) Sending data on channel (7)
hp-align[5520]: debug: 'msg=deviceopen\nio-mode=1\nio-scan-port=0
\ndevice-uri=hp:/usb/DeskJet_930C?serial=HU11N1G1CBJJ\nio-control=0
\nio-mfp-mode=2\n'
hp-align[5520]: debug: (xmit) Reading data on channel (7)
hp-align[5520]: debug: 'msg=DeviceOpenResult\nresult-code=0\ndevice-id=1
\n'
hp-align[5520]: debug: device-id=1
hp-align[5520]: debug: Opened device: hp
(backend=hp:/usb/DeskJet_930C?serial=HU11N1G1CBJJ,is_hp=True,bus=usb,model=DeskJet_930C,dev=,serial=HU11N1G1CBJJ,host=,port=1)
hp-align[5520]: debug: (xmit) Sending data on channel (7)
hp-align[5520]: debug: 'msg=deviceid\ndevice-id=1\n'
hp-align[5520]: debug: (xmit) Reading data on channel (7)
hp-align[5520]: debug: 'msg=DeviceIDResult\nresult-code=0\nlength=220
\ndata:\nMFG:HEWLETT-PACKARD;MDL:DESKJET
930C;CMD:MLC,PCL,PML;CLASS:PRINTER;DESCRIPTION:Hewlett-Packard DeskJet
930C;SERN:HU11N1G1CBJJ;VSTATUS:$HB0
$NC0,ff,DN,IDLE,CUT,K0,C0,SM,NR,KP070,CP089;VP:0800,FL,B0;VJ:
;'
hp-align[5520]: debug: (xmit) Sending data on channel (7)
hp-align[5520]: debug: 'msg=devicestatus\ndevice-id=1\n'
hp-align[5520]: debug: (xmit) Reading data on channel (7)
hp-align[5520]: debug: 'msg=DeviceStatusResult\nresult-code=0
\nstatus-code=24\nstatus-name=NoFault\n'
hp-align[5520]: debug: (xmit) Sending data on channel (7)
hp-align[5520]: debug: 'msg=deviceid\ndevice-id=1\n'
hp-align[5520]: debug: (xmit) Reading data on channel (7)
hp-align[5520]: debug: 'msg=DeviceIDResult\nresult-code=0\nlength=220
\ndata:\nMFG:HEWLETT-PACKARD;MDL:DESKJET
930C;CMD:MLC,PCL,PML;CLASS:PRINTER;DESCRIPTION:Hewlett-Packard DeskJet
930C;SERN:HU11N1G1CBJJ;VSTATUS:$HB0
$NC0,ff,DN,IDLE,CUT,K0,C0,SM,NR,KP070,CP089;VP:0800,FL,B0;VJ:
;'
hp-align[5520]: debug: Type 1/2 (S: or VSTATUS:) status
hp-align[5520]: debug: {'revision': 255, 'photo-tray': 0, 'top-lid': 1,
'in-tray2': 0, 'in-tray1': 0, 'agents': [{'type': 1, 'kind': 3,
'health': 0, 'state': 1, 'level': 70}, {'type': 2, 'kind': 3, 'health':
0, 'state': 1, 'level': 89}], 'duplexer': 0, 'supply-lid': 0,
'media-path': 1, 'status-code': 1000}
hp-align[5520]: debug: Sending data on channel (8)
hp-align[5520]: debug: 'msg=event\nevent-code=1000\nusername=rg
\ndevice-uri=hp:/usb/DeskJet_930C?serial=HU11N1G1CBJJ\nno-fwd=False
\nevent-type=event\njob-id=0\nretry-timeout=0\n'
hp-align[5520]: debug: {'dev-file': '', 'status-desc': 'The printer is
idle.', 'top-lid': 1, 'duplexer': 0, 'supply-lid': 0, 'is-hp': True,
'3bit-status-name': 'NoFault', 'host': '', 'in-tray1': 0,
'cups-printer': 'DeskJet_930C,DJphoto,GimpPrint_B&W,GimpPrint_colour',
'serial': 'HU11N1G1CBJJ', 'error-state': 0, 'device-state': 1, 'panel':
0, 'in-tray2': 0, 'device-uri':
'hp:/usb/DeskJet_930C?serial=HU11N1G1CBJJ', 'photo-tray': 0,
'panel-line1': '', 'panel-line2': '', 'back-end': 'hp', 'port': 1,
'deviceid': 'MFG:HEWLETT-PACKARD;MDL:DESKJET
930C;CMD:MLC,PCL,PML;CLASS:PRINTER;DESCRIPTION:Hewlett-Packard DeskJet
930C;SERN:HU11N1G1CBJJ;VSTATUS:$HB0
$NC0,ff,DN,IDLE,CUT,K0,C0,SM,NR,KP070,CP089;VP:0800,FL,B0;VJ:
;', 'cups-uri': 'hp:/usb/DeskJet_930C?serial=HU11N1G1CBJJ',
'3bit-status-code': 24, 'status-code': 1000, 'media-path': 1, 'revision': 255}
hp-align[5520]: debug: Alignment type=1
An alignment page will be printed.
Please load plain paper into the printer. Press <Enter> to contine or
'q' to quit.
hp-align[5520]: debug: Printing file '/tmp/tmp9kFTxH' to queue
'DeskJet_930C' (gzip=False, direct=False, raw=True, remove=True)
hp-align[5520]: debug: lpr -PDeskJet_930C -l -r /tmp/tmp9kFTxH
hp-align[5520]: debug: Closing device...
hp-align[5520]: debug: (xmit) Sending data on channel (7)
hp-align[5520]: debug: 'msg=deviceclose\ndevice-id=1\n'
hp-align[5520]: debug: (xmit) Reading data on channel (7)
hp-align[5520]: debug: 'msg=DeviceCloseResult\nresult-code=0\n'
On Tue, 2007-01-02 at 14:01 -0800, Aaron wrote:
> Can you run
>
> hp-align -g
>
> and post the log?
>
> thanks.
>
> Aaron
>
> On 12/27/06, Robin Gripp <[EMAIL PROTECTED]> wrote:
> >
> > I am running a 930C under Ubuntu and HPLIP version 1.6.12. I also use
> > Gutenprint 5.0 to print b & w photographs, as I can alter the settings in
> > the later to give a better (neutral) monochrome than with HPLIP, which gives
> > me a noticeable blue cast.
> > Using either toolbox or hp-align to align, the printer merely spits out a
> > blank page, while using hp-colorcal gives me the message - Color calibration
> > not supported or required by device.
> > I can use hp-align for my psc1110 that I also have connected.
> > I would like to attend these issues, as I find that HPLIP gives me a
> > sharper image than those attainable with Gutenprint, no matter which dither
> > pattern is used in the latter.
> > With thanks,
> > Robin.
> > -------------------------------------------------------------------------
> > Take Surveys. Earn Cash. Influence the Future of IT
> > Join SourceForge.net's Techsay panel and you'll get the chance to share your
> > opinions on IT & business topics through brief surveys - and earn cash
> > http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
> >
> > _______________________________________________
> > HPLIP-Help mailing list
> > [email protected]
> > https://lists.sourceforge.net/lists/listinfo/hplip-help
> >
> >
> >
>
>
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
HPLIP-Help mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/hplip-help
