Dear Sir or Mam, my name is Jonas Bilal, and I am a master student at a university of applied science (the FHNW). At the same time, I am working for the FHNW in parallel.
However, for my work and master project, I am using the GSL Library for the firmware of an MCU (a STM32 Board with Arm Cortex M4). To cross-compile the GSL with arm-none-ebi-gcc I build up a little toolchain from the GNU-Toolchain as described here: https://www.linkedin.com/pulse/cross-compiling-gcc-toolchain-arm-cortex-m-processors-ijaz-ahmad [https://media-exp1.licdn.com/dms/image/C5612AQE6AYINXANYFg/article-cover_image-shrink_600_2000/0/1552584786918?e=1648080000&v=beta&t=GsZQ_ZU3fMtyr3rJTarT4nwKTKaLQX92ilrjQM479fI]<https://www.linkedin.com/pulse/cross-compiling-gcc-toolchain-arm-cortex-m-processors-ijaz-ahmad> Cross-Compiling GCC Toolchain for ARM Cortex-M Processors<https://www.linkedin.com/pulse/cross-compiling-gcc-toolchain-arm-cortex-m-processors-ijaz-ahmad> A toolchain is a set of tools that compiles source code into executables that can run on your target device. A toolchain normally consists of a compiler, a linker, and run-time libraries. www.linkedin.com Unfortunately, it did not work, and I always got from the linker the message "error adding symbols: file format not recognized". I already asked in StackOverflow and searched on the internet (for over a week) with no result. I did try virtually everything. Do you have any advice for me on how to cross-compile the gsl for the arm cortex m4? I would be very happy with every idea. I have attached my bash script for cross-compiling if needed. I would be very happy for any help. Thank you very much. Best regards Jonas
