On Fri, Oct 31, 2008 at 1:54 PM, Joerg Reisenweber <[EMAIL PROTECTED]>wrote:
> > > > > > That's effectively what I did. I attached teflon tape to the bottom of > the > > connector to isolate it. The buzz is still present. > > Even without the bead attached? > Without the bead attached there was still some buzz. > > Great rework shown in your other mail. > Thanks I only did the filing of the connector. We have a very competent hardware guy that does the soldering for me. > > > and have the connector reattached so I can try and dump the GSM firmware. > Sorry I don't understand this. Isn't the connector attached yet? Why would > you > want to dump GSM FW and why would you need the connector for that? > > Yes it's back on now. I'm trying to write an opensource version of fluid. So If I can dump the firmware I should also be able to write it back. According to the schematics ( and other posts I've read on the net ) the firmware on the calypso can can be slurped through the headphone jack, via the irda tx/rx. Angus -- Angus Ainslie http://www.handheldshell.com/
_______________________________________________ hardware mailing list [email protected] http://lists.openmoko.org/mailman/listinfo/hardware
