Will do that Dominic and revert.thanks for looking at this.colin
From: Dominic Spill <[email protected]>
To: colin glass <[email protected]>
Cc: [email protected]
Sent: Thursday, 6 July 2017, 4:48
Subject: Re: [Hackrf-dev] Take 2 on firmware
On 5 Jul 2017 14:57, "colin glass" <[email protected]> wrote:
Nothing in DFU mode
No output on lsusb no NXP ARM device ;-(
Could you paste the output of dmesg from when you connect the device in dfu
mode?
Thanks, Dominic
From: Dominic Spill <[email protected]>
To: colin glass <[email protected]>
Cc: "HackRF-dev@greatscottgadgets. com" <HackRF-dev@greatscottgadgets. com>
Sent: Monday, 3 July 2017, 17:33
Subject: Re: [Hackrf-dev] Take 2 on firmware
On 3 July 2017 at 08:53, colin glass via HackRF-dev
<hackrf-dev@greatscottgadgets. com> wrote:
>
> I got my hands on a second hackrf hardware device 2 after I concluded the
> fist device was bricked.
> So the led's are better on this device BUT the USB led will not light and I
> cannot
> get the device to talk to windows or Linux (Ubuntu).
>
> Now what do I do if I cannot handshake the board and install firmware?
> What am I missing as I cannot find anything on the forums .... kind of run
> out of ideas.
Does the board show up when you connect in DFU mode? Hold down the DFU button
as you connect or reset the HackRF. It will show up as an "NXP ARM device" in
lsusb output from Linux.
_______________________________________________
HackRF-dev mailing list
[email protected]
https://pairlist9.pair.net/mailman/listinfo/hackrf-dev
