Brian, I'm not on a Raspberry Pi at the moment, so your commands may vary slightly. This is how I perform the install on Kali (should be the same for Ubuntu (Debian)):
Install dependencies and make sure have you have a local copy of the hackrf github repo: *overflow@pollan:~$ sudo apt-get install git gcc cmake make fftw3 fftw3-dev pkg-config build-essentialoverflow@pollan:~$ git clone https://github.com/mossmann/hackrf <https://github.com/mossmann/hackrf>* (If you already have this repo cloned locally, you can update it by running a git pull): *overflow@pollan:~/hackrf$ cd hackrf * *overflow@pollan:~/hackrf$ git pull* cmake the files *overflow@pollan:~/hackrf$ cd hackrf* *overflow@pollan:~/hackrf$ mkdir build* *overflow@pollan:~/hackrf$ cd build* *overflow@pollan:~/hackrf/build$ cmake ..* *overflow@pollan:~/hackrf/build$ make && make install* Check to see if installed ok (Remember, hackrf_debug is a new command..) *overflow@pollan:~/hackrf$ hackrf_debug* If you get instructions here, you should be all set. If you are unable to build, it's possible that the dependencies are named slightly different on Raspian. I can fire up my Pi later tonight to be sure if you have issues. Enjoy! -adam (overflow_ on freenode) On Sat, Feb 11, 2017 at 7:35 PM, Brian Gieryk <[email protected]> wrote: > I have successfully updated all the firmware in my Hackrf one. > > Now, how in the world do I update Hackrf-tools? > > I really would like to see if I can use the sweep function. > > FYI, I am completely incompetent with the Linux command line. > > I am running a Raspberry Pi 3B, with Raspbian Jessie. > > Thanks in advance, > > Brian > KE6IYC > > Sent from my iPhone > _______________________________________________ > HackRF-dev mailing list > [email protected] > https://pairlist9.pair.net/mailman/listinfo/hackrf-dev > -- ADAM BLANQUART | [email protected] |
_______________________________________________ HackRF-dev mailing list [email protected] https://pairlist9.pair.net/mailman/listinfo/hackrf-dev
