Thank you both for the info. It turns out I was running the beta version. Installed the stable release and all is well.
I can select different sound cards (4 'pane' window), but it does not actually TX, even though HDSDR acts as one would expect it to in TX, due to previously mentioned issues. What Wndoze software will allow TX with the HackRF? I have tried SDRConsole, but it is outdated, as it limits the low end to 10 MHz.... Thank you again for your thoughts. Brian KE6IYC Sent from my iPad > On Dec 23, 2016, at 16:39, Dominic Spill <[email protected]> wrote: > > On 23 December 2016 at 16:32, Brian Gieryk <[email protected]> wrote: > > > > I am running the HackRF One with HDSDR under Win 7 pro 32 bit. > > > > RX is fine, but when attempting to TX, it tells me to select different > > sound cards forRX and TX. > > > > It brings up a window with a single 'pane' and only allows selection for RX. > > > > I have a secondary sound card, with mic plugged in, and windows sees it > > just fine. > > > > Is this a HackRF issue, or an HDSDR problem? > > I took a look at the HDSDR website (http://www.hdsdr.de/hardware.html) and it > says that they only have RX support for HackRF, so this is expected. > > However, HackRF One is a transceiver and so it should be possible to > transmit, but this will likely require some software development on the part > of the HDSDR developers or perhaps some tweaks to the ExtIO interface for > HackRF. There is a GitHub issue that discusses a little of this: > https://github.com/jocover/ExtIO_HackRF/issues/6 > > Thanks, > Dominic
_______________________________________________ HackRF-dev mailing list [email protected] https://pairlist9.pair.net/mailman/listinfo/hackrf-dev
