You would likely need to demodulate the signal to identify the operator. This has been done before: https://github.com/gearmover/hackrf-gsm https://github.com/JiaoXianjun/LTE-Cell-Scanner
If all you want to do is determine signal strength of a known carrier, then you will need to calibrate the HackRF and do it via an FFT. -Nick http://gpio.com On Thu, Jun 23, 2016 at 6:04 AM, Kasper Nielsen <[email protected]> wrote: > I would like to know if I can use the HackRF One as an analyser of > GSM/3G/4G signal strength throughout the country? > > So if I drive around I can scan and see network strength of the various > telecom operators in a given area. > > I know it is a very newbie question, but I hope you can help. > > _______________________________________________ > HackRF-dev mailing list > [email protected] > https://pairlist9.pair.net/mailman/listinfo/hackrf-dev > >
_______________________________________________ HackRF-dev mailing list [email protected] https://pairlist9.pair.net/mailman/listinfo/hackrf-dev
