You did not mention the frequency, type of antenna, modulation used, data rate, if FEC used - I do not believe anyone can answer your questions with the information provided.
At least one HackRF has sent 50 bits of information 2299km over 2 (or 15) minutes using a antenna designed for the 20 meter band (14MHz) using the WSPR protocol. https://twitter.com/argilo/status/501072471496601600 https://twitter.com/argilo/status/501515208280375296 If you look at the command line arguments supported by hackrf_transfer ... snip ... [-a amp_enable] # RX/TX RF amplifier 1=Enable, 0=Disable. [-l gain_db] # RX LNA (IF) gain, 0-40dB, 8dB steps [-g gain_db] # RX VGA (baseband) gain, 0-62dB, 2dB steps [-x gain_db] # TX VGA (IF) gain, 0-47dB, 1dB steps ... snip ... There are three gains for RX and two gains for TX. In gnuradio the exact same would be true (so for RX the block has RF, IF and BB but for TX only RF and BB) RF RX/TX 0dB or 14dB IF RX only 0-40dB, 8dB steps BB RX 0-62dB, 2dB steps BB TX 0-47dB, 1dB steps I would not enable the RF amplifier unless your antenna has a good SWR, i.e. it was designed for TX. In fact I would not even TX unless your antenna has a good SWR. If you are going to TX you should know a lot of theory, and the laws that apply, so it would be best to get a amateur radio license and learn both. For more to think about see: https://en.wikipedia.org/wiki/Path_loss https://en.wikipedia.org/wiki/Friis_transmission_equation https://github.com/mossmann/hackrf/wiki/FAQ#what-is-the-receive-sensitivity-of-hackrf https://en.wikipedia.org/wiki/WSPR_%28amateur_radio_software%29 https://en.wikipedia.org/wiki/Standing_wave_ratio On 09/12/2015 10:34, 김상혁 wrote: > Hi. I tried to send data and receive that using two hackrf one devices. > > In my test, hackrf can’t communicate if distance over about 1.5m > > What is the coverage of hackrf one ? > > And how can increase this coverage ? > > If it is solved by increasing Tx power, how can increase Tx power using > osmocom block, which parameter effect to Tx power ? > > Thanks every replies . > > > _______________________________________________ > HackRF-dev mailing list > [email protected] > https://pairlist9.pair.net/mailman/listinfo/hackrf-dev
signature.asc
Description: OpenPGP digital signature
_______________________________________________ HackRF-dev mailing list [email protected] https://pairlist9.pair.net/mailman/listinfo/hackrf-dev
