Hi Mike, The interference affected the entire 2.4 GHz channels. Please let me know about 10 Hz beaconing ?
I have wifi signal analyzer, and it fluctuates to -10 dBm Cheers Srinivasan T -----Original Message----- From: Mike Kershaw [mailto:[email protected]] Sent: Wednesday, May 27, 2015 10:17 PM To: Srinivasan T Cc: [email protected] Subject: Re: [Hackrf-dev] Signal Interference at 2.4 GHz using HackRF and SDR# Pic 2 looks like fairly normal packets, to me. Your waterfall refresh rate is probably too slow to catch the 10hz beaconing. Pic 1 could be heavy wifi traffic and you're looking at the gap in 2 channel. -m On Wed, May 27, 2015 at 09:50:13PM +0800, Srinivasan T wrote: > > > Hi All, > > > > While scanning 2.4 GHz using hackRf and SDR#, i detected interference > at 2.4 GHz which affected entire channels. > > The waterfall image created a solid red and yellow line combinations. > > > > Attached the files . > > > > During the scanning the 2.4 GHz, I am make sure i am the only > available using Wi-Fi portable not anyone else. > > I would like to know what is the RF interference. > > > > The waterfall image is really new type and does not match with > available 2.4 GHz waterfall image available. > > Need input. > > > > Please advise. > > > > Regards > > > > Srinivasan T > > > > _______________________________________________ > HackRF-dev mailing list > [email protected] > https://pairlist9.pair.net/mailman/listinfo/hackrf-dev -- _______________________________________________ HackRF-dev mailing list [email protected] https://pairlist9.pair.net/mailman/listinfo/hackrf-dev
