I'm planning to do something very similar once I finish moving into a new house. We should connect back channel and collaborate. I've got a working Lubuntu install which I've used to run through the first six of Mike's lessons. On Nov 7, 2014 5:06 PM, "pete M" <[email protected]> wrote:
> yup been following the lessons.. But I cant apply them yet.. cant run > pentoo on any of my machine.. But will run ubuntu on one, waiting to have > the time to install the whole thing by hands... > > just to let you know, Need the sweeping for tuning cavity's and duplexer.. > > will use a rtl-sdr to read the signal and will tx with the hack rf.. will > be able to set notch and band pass like that.. will see if it works ;-) > > > > Date: Fri, 7 Nov 2014 16:50:28 -0700 > > From: [email protected] > > To: [email protected] > > CC: [email protected] > > Subject: Re: [Hackrf-dev] Can I do that? > > > > On Fri, Nov 07, 2014 at 06:37:28PM -0500, pete M wrote: > > > > > > BUT I do learn fast.. > > > > You might like to start here: > > > > http://greatscottgadgets.com/sdr/ > > > > I'm working on resuming lessons this month. > > > > > One other question.. can it also sweep in tx something like 7 mhz band > > > of frquency very fast then start again all over and as long as needed? > > > > That is not a problem. There is some limitation to how fast the analog > > front end (hardware) can be re-tuned, but that doesn't matter for > > operations with a total bandwidth less than 20 MHz. A sweep over 7 MHz > > can be done entirely in software without any requirement to re-tune the > > hardware. > > > > Mike > > _______________________________________________ > HackRF-dev mailing list > [email protected] > https://pairlist9.pair.net/mailman/listinfo/hackrf-dev > >
_______________________________________________ HackRF-dev mailing list [email protected] https://pairlist9.pair.net/mailman/listinfo/hackrf-dev
