Hi Simon / All, With the antenna using the rtl usb stick i can receive FM fine. I thought the ANT500 is better than the standard antenna which comes with most of those usb dongles ? I tested the continuity of the ANT500 which is good. Shield and antenna have none, but the inner pin and antenna have continuity.
Also i just installed the 2.3 beta which now displays the hackrf one as an option. But still no go on the usual FM frequencies, just noise or silence when selecting a peak. I bought also a few other antennas for specific ranges like 2.4 Ghz. How can i use the 2.4 Ghz antenna to determine if the hackrf works ? I mean i can connect it and go to 2.4 Ghz, but what is a typical sound or view to know it is working as it should ? Thanks, Micky On Thu, 30 Oct 2014 19:05:14 +0100 "Simon Brown" <simon@sdr- radio.com> wrote: >Micky, > >You must use a better antenna unless you live right in the middle >of the Big City, and even then your antenna may be defective. > >Simon Brown G4ELI >http://v2.sdr-radio.com > > >-----Original Message----- >From: [email protected] [mailto:[email protected]] > >Hi Simon, > >Thank you for your help. I use the ANT500 antenna which came with >the unit. I also noticed that SDR# shows the device as >"Jawbreaker" >while in my understanding that was a beta prototype. But judging >from size, hackrf_info and GQRX it's picked up as HackRF One. > >I will setup the SDR-Radio software on my laptop and from there i >hope we can get something out of it. > >_______________________________________________ >HackRF-dev mailing list >[email protected] >https://pairlist9.pair.net/mailman/listinfo/hackrf-dev _______________________________________________ HackRF-dev mailing list [email protected] https://pairlist9.pair.net/mailman/listinfo/hackrf-dev
