My use case is as follows - 1. tasks which do not support idempotence inherently (such as deletes, and some puts) carry a unique identifier, which is written as a receipt in an attribute of an entity that is updated in the transaction. 2. When a task arrives carrying a receipt, I check that it does not already exist - so receipted tasks incur an additional, key only, db read
This is essentially my algorithm for ensuring idempotence (in situations where it is not inherent) - ignore subsequent executions. If the same task *cannot* be running in parallel, then the check for the receipt can be done outside the transaction that writes the receipt - which has a couple of advantages - a. It can be done up front in the task handler, so I don't have to go all the way through to the transactional write before discovering it already executed b. More importantly, I can reduce the work done inside the transaction - every extra millisecond spent in the transaction locks the entity group, and at scale, those milliseconds can add up - especially on entity groups that are somewhat write intensive. If the same task *can* be running in parallel, then I need to do the receipt read inside the transaction that writes it. It would be a pity to do that extra work in every transaction for a very rare scenario. As stated earlier, it seems that it might be possible for GAE to guarantee that it does not execute the same task in parallel - by ensuring that, for error scenarios like those above (408, client crash, perhaps others), the 2nd execution waits 30 seconds. That has some obvious downsides, but given how rarely it occurs, and given that an app shouldn't be relying on the speed with which a task is executed, it seems like a reasonable trade-off to get a reduction in transactional work for the vast majority of the time - less contention, less CPU, less datastore activity. A simple example is a task which increments a counter - we don't want to increment the counter twice. The problem is the same whether one or many entities are being updated during handling of the task. Do you have many situations where you perform a read that does not result in some sort of update - db update, another task raised, email sent, external system notified etc.? There's a subset of most of these that we want to avoid doing twice. It's the multiple writes, rather than multiple reads causing issues. Anyone from google able to end the speculation? :) On Apr 30, 2:31 am, Eli Jones <[email protected]> wrote: > In my opinion, the case you are asking about is pretty much the reason they > state that tasks must be idempotent.. even with named tasks. > > They cannot guarantee 100% that some transient error will not occur when a > scheduled task is executed (even if you are naming tasks and are guaranteed > 100% that your task will not be added to the queue more than once). > > So, it is possible to have more than one version of the "same" task > executing at the same time. You just need to construct your tasks so they > aren't doing too much at once (e.g. reading some data, then updating or > inserting.. then reading other data... and updating some more), or you need > to make sure to do all that inside a big transaction.. and, even then, you > still need to ensure idempotence. > > I sort of prefer a poor man's version of idempotence for my chained tasks. > Mainly, if the "same" task runs more than once.. each version will have a > potentially different result, but I am perfectly happy getting the result > from the task that ran last. But, I can easily accept this since my tasks > are not doing multiple updates at once.. and they are not reading from the > same entities that they are updating. > > What is your exact use case? > > > > > > On Thu, Apr 29, 2010 at 7:28 PM, hawkett <[email protected]> wrote: > > Thanks for the response - it's good to know that the multiple > > executions cannot occur in parallel, although I'm not sure I > > completely understand the reasons. Take the following example - > > > 1. task queue executes a task for the first time (T1E1) > > 2. application receives task, and begins processing > > 3. the http connection is lost soon after, and the task queue receives > > a HTTP response code > > 4. task queue backs off (e.g. waits 2s) > > 5. task queue executes the task a second time (T1E2) > > 6. application receives task and begins processing > > > Why is it that T1E1 cannot still be running at step 5/6? Are there no > > conditions at step 3 where a response (of any status) is received > > while the processing at step 2 is still underway? > > > There is also another situation, where the HTTP client crashes, which > > is also unclear - > > > 1. task queue executes a task for the first time (T1E1) > > 2. application receives task, and begins processing > > 3. the task queue crashes (i.e. the HTTP client), so no response can > > be received > > 4. task queue recovers, or another node takes over - (how does it > > determine the state of T1E1?) > > 5. task queue executes the task a second time, since it cannot know > > whether T1E1 completed successfully? (T1E2) > > 6. application receives task and begins processing > > > Is it possible in this scenario that it will re-execute the task > > (T1E2) prior to the completion of the first (T1E1)? > > > Thanks, > > > Colin > > > On Apr 29, 5:36 pm, djidjadji <[email protected]> wrote: > > > The decision to rerun a task is done based on the HTTP response code. > > > There is always a response code, even when the connection is lost. > > > > When the code is 200 the task is considered complete and will not be > > rerun. > > > Any other code means the task needs a rerun. > > > The time between the reruns is increased with each retry. > > > > This means a certain task is never retried in parallel. > > > > But it could be that a task created later will finish first because it > > > did not need to retry. > > > > 2010/4/25 hawkett <[email protected]>: > > > > > Wondering if I haven't asked the question clearly enough. Regarding > > > > the statement that we need to assume tasks may be executed multiple > > > > times (i.e. ensure idempotence): is that multiple times serially, or > > > > possibly multiple times concurrently? > > > > > I've gone ahead and coded my idempotence solution to assume that they > > > > cannot be running concurrently, just because its a bit easier, and a > > > > bit less work inside a transaction. I'm guessing that the reason they > > > > may be run multiple times is that GAE won't know what to do if it > > > > doesn't get a response from a task it executes - it can't be sure that > > > > the task was received by the application, or that the application was > > > > given the opportunity to correctly react the task - in fact it has to > > > > assume that it didn't, and therefore runs it again to be sure. I'm > > > > assuming that GAE always knows for certain that a task has been fired, > > > > just not whether it was fired successfully - and it will only fire > > > > again if it hasn't correctly processed a response from the previous > > > > execution. If this were true, then it seems as long as GAE guarantees > > > > that it waits > 30s before firing the task a second time (rather than > > > > just reacting to the loss of the http connection for example), then we > > > > can know it is not executing in parallel, because the first execution > > > > cannot be still running due to the request limit. > > > > > Am I looking at this correctly? Is it fair to assume that the same > > > > task cannot be running in parallel? Cheers, > > > > > Colin > > > > > On Apr 23, 3:14 pm, hawkett <[email protected]> wrote: > > > >> Hi Tim - there's a couple of reasons why this won't work - firstly, it > > > >> is my understanding that named tasks are also subject to the > > > >> possibility of being executed twice (the name only prevents the same > > > >> name being added to the queue twice), and secondly tasks raised > > > >> transactionally cannot have a task name. > > > > >> On Apr 23, 11:45 am, Tim Hoffman <[email protected]> wrote: > > > > >> > Probably the best way to guard would be have the task name specific > > to > > > >> > the operation. > > > >> > You cant have another task with the same name for about a week, > > > > >> > T > > > > >> > On Apr 23, 3:51 pm, hawkett <[email protected]> wrote: > > > > >> > > HI, > > > > >> > > I understand that it is possible for a single task to be executed > > more > > > >> > > than once, but is it safe to assume that only one instance of a > > > >> > > specific task will be executing at the one time? It makes it much > > more > > > >> > > difficult (time consuming) to implement idempotent behaviour if it > > is > > > >> > > possible for the subsequent executions of a task to begin before > > the > > > >> > > first has completed - i.e. for the same task to be executing > > > >> > > concurrently. I can think of ways of using db locking (memcache is > > not > > > >> > > reliable - especially when this scenario is most likely to occur > > > >> > > during system failures) to recognise the multiple concurrent > > > >> > > executions, but it would be great to know that this scenario > > cannot > > > >> > > occur. Thanks, > > > > >> > > Colin > > > > >> > > -- > > > >> > > You received this message because you are subscribed to the Google > > Groups "Google App Engine" group. > > > >> > > To post to this group, send email to > > [email protected]. > > > >> > > To unsubscribe from this group, send email to > > [email protected]<google-appengine%2Bunsubscrib > > [email protected]> > > . > > > >> > > For more options, visit this group athttp:// > > groups.google.com/group/google-appengine?hl=en. > > > > >> > -- > > > >> > You received this message because you are subscribed to the Google > > Groups "Google App Engine" group. > > > >> > To post to this group, send email to > > [email protected]. > > > >> > To unsubscribe from this group, send email to > > [email protected]<google-appengine%2Bunsubscrib > > [email protected]> > > . > > > >> > For more options, visit this group athttp:// > > groups.google.com/group/google-appengine?hl=en. > > > > >> -- > > > >> You received this message because you are subscribed to the Google > > Groups "Google App Engine" group. > > > >> To post to this group, send email to > > [email protected]. > > > >> To unsubscribe from this group, send email to > > [email protected]<google-appengine%2Bunsubscrib > > [email protected]> > > . > > > >> For more options, visit this group athttp:// > > groups.google.com/group/google-appengine?hl=en. > > > > > -- > > > > You received this message because you are subscribed to the Google > > Groups "Google App Engine" group. > > > > To post to this group, send email to [email protected] > > . > > > > To unsubscribe from this group, send email to > > [email protected]<google-appengine%2Bunsubscrib > > [email protected]> > > . > > > > For more options, visit this group athttp:// > > groups.google.com/group/google-appengine?hl=en. > > > > -- > > > You received this message because you are subscribed to the Google Groups > > "Google App Engine" group. > > > To post to this group, send email to [email protected]. > > > To unsubscribe from this group, send email to > > [email protected]<google-appengine%2Bunsubscrib > > [email protected]> > > . > > > For more options, visit this group athttp:// > > groups.google.com/group/google-appengine?hl=en. > > > -- > > You received this message because you are subscribed to the Google Groups > > "Google App Engine" group. > > To post to this group, send email to [email protected]. > > To unsubscribe from this group, send email to > > [email protected]<google-appengine%2Bunsubscrib > > [email protected]> > > . > > For more options, visit this group at > >http://groups.google.com/group/google-appengine?hl=en. > > -- > You received this message because you are subscribed to the Google Groups > "Google App Engine" group. > To post to this group, send email to [email protected]. > To unsubscribe from this group, send email to > [email protected]. > For more options, visit this group > athttp://groups.google.com/group/google-appengine?hl=en. -- You received this message because you are subscribed to the Google Groups "Google App Engine" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/google-appengine?hl=en.
