Thank you, Christophe!
Stephen -----Original Message----- From: Christophe Geuzaine <[email protected]> Sent: Friday, 27 November 2020 8:52 PM To: Banks, Stephen (Energy, Clayton North) <[email protected]> Cc: [email protected] Subject: Re: [Gmsh] constructing trimmed NURBS surfaces > On 27 Nov 2020, at 01:21, Banks, Stephen (Energy, Clayton North) > <[email protected]> wrote: > > Hi Christophe, > > Yes, I agree that the most natural way would be to specify wires of curves > defined in the parametric space of the surface. OpenNURBS also does it this > way, i.e. uses 2D parameter space trimming curves > (https://developer.rhino3d.com/guides/cpp/brep-data-structure/). Inspection > of these curves in OpenNURBS reveals it constructs a "2D curve" using a 3D > curve with the 'Z' coordinate used in the curve construction set to zero. I've pushed a first implementation: you can now pass wires to the addBSplineSurface() and addBezierSurface() API functions. The wires can be either interpreted in 2D (in the parametric space of the surface), or in 3D (projected on the patch). See https://gitlab.onelab.info/gmsh/gmsh/-/blob/master/demos/api/bspline_bezier_trimmed.py for an example. Don't hesitate to open an issue on the gitlab to discuss the implementation. Christophe > > Kind regards, > Stephen > > > -----Original Message----- > From: Christophe Geuzaine <[email protected]> > Sent: Thursday, 26 November 2020 10:51 PM > To: Banks, Stephen (Energy, Clayton North) <[email protected]> > Cc: [email protected] > Subject: Re: [Gmsh] constructing trimmed NURBS surfaces > > > Hi Stephen, > > We currently only create trimmed patches indirectly, e.g. through boolean > operations. > > It would indeed be nice to expose an interface for building trimmed surfaces > directly. I guess the most natural way would be to specify wires of curves > defined in the parametric space of the surface? We would need to think a bit > about how to design the api, since in Gmsh we only expose the creation of 3D > curves. > > Christophe > > >> On 26 Nov 2020, at 07:07, Banks, Stephen (Energy, Clayton North) >> <[email protected]> wrote: >> >> Hello, >> >> How do I construct trimmed NURBS surfaces? >> >> In section F.4 of the documentation, point (1) states Gmsh supports trimmed >> NURBS surface with the OpenCASCADE kernel. However, I am not able to work >> out how construct them. I see the addBSplineSurface function, which I have >> successfully used to construct a NURBS surface, but I don’t see how to trim >> the resulting surface using curves. >> >> For background, I am developing an interface between Rhino3D and Gmsh using >> the OpenNURBS library and the Gmsh API. This involves translating the >> geometry from one representation to the other. This question is prompted by >> me trying translate OpenNURBS Brep (boundary representation) geometrical >> objects to Gmsh, which is a surface or polysurface with trim curve >> information. >> >> Many thanks, >> Stephen >> _______________________________________________ >> gmsh mailing list >> [email protected] >> http://onelab.info/mailman/listinfo/gmsh > > — > Prof. Christophe Geuzaine > University of Liege, Electrical Engineering and Computer Science > http://people.montefiore.ulg.ac.be/geuzaine > > > > > _______________________________________________ > gmsh mailing list > [email protected] > http://onelab.info/mailman/listinfo/gmsh — Prof. Christophe Geuzaine University of Liege, Electrical Engineering and Computer Science http://people.montefiore.ulg.ac.be/geuzaine _______________________________________________ gmsh mailing list [email protected] http://onelab.info/mailman/listinfo/gmsh
