> On 20 Apr 2020, at 14:42, Fahad Sarfraz Butt <[email protected]> > wrote: > > Hello GMSH Team: Fahad here > > > > I have built a wind-turbine blade in GMSH using following steps: > > 1. Point coordinates of airfoils distributed along span > > 2. Connecting points using splines to first make airfoils > > 3. Then connecting airfoils through splines running through points along > airfoil surfaces > > I have two questions: > > Question 1) how can I make this blade a solid? I only want the surface of the > blade as a plane or ruled surface and not the individual airfoils. Please > suggest how can I create a solid and a volume in my case? > > Question 2) I rotate and duplicate this blade to generate a rotor of two > blades. Original blade has 259 lines and now after rotation with duplication, > I should have 518 lines but I get 480 lines only as shown by statistics and > also by hovering over the splines I see that tags are missing. Kindly help. >
Maybe send an example so we can have a look? Christophe > Thanks > > > > Thanks. > > > > > > > > > _______________________________________________ > gmsh mailing list > [email protected] > http://onelab.info/mailman/listinfo/gmsh — Prof. Christophe Geuzaine University of Liege, Electrical Engineering and Computer Science http://www.montefiore.ulg.ac.be/~geuzaine _______________________________________________ gmsh mailing list [email protected] http://onelab.info/mailman/listinfo/gmsh
