Dear profesor, thanks a lot! It is working. I really apreciate your time and support
Best regards O. On Sat, Apr 4, 2020 at 2:04 PM Christophe Geuzaine <[email protected]> wrote: > > > > On 4 Apr 2020, at 12:32, Octavio Castillo Reyes < > [email protected]> wrote: > > > > Dear gmsh team and users, > > > > I would greatly appreciate your help in understanding / solving the > construction of a mesh with gmsh. In the attached file you will find the > definition of the geometry, which is made up of 8 volumes. What I want is > to build a mesh with the following characteristics (if possible): > > > > For each volume get the element size: > > Mat1, Mat2, Mat3 = 50 > > Mat5, Mat6 = 500 > > Mat7, Mat8 = 2500 > > > > Note that Mat1, Mat2 and Mat3 are contained in Mat5 and Mat6., And > these, in turn, are contained in Mat7. I have tried different > configurations but have not been able to obtain an adequate morning size, > which in some cases is over-refined or under-refined. > > > > Could someone from the community give me a tip or help? I would very > much appreciate your comments > > > > I've played a bit with the constraints (see comments in the file) and the > results seem OK: > > > > Christophe > > > > Thanks in advance > > > > Best regards > > <mesh.geo>_______________________________________________ > > gmsh mailing list > > [email protected] > > http://onelab.info/mailman/listinfo/gmsh > > — > Prof. Christophe Geuzaine > University of Liege, Electrical Engineering and Computer Science > http://www.montefiore.ulg.ac.be/~geuzaine > > > >
_______________________________________________ gmsh mailing list [email protected] http://onelab.info/mailman/listinfo/gmsh
