Thank you for your discussion gentlemen,
Therefore, I should start thinking to run Geoserver on an outside Virtual
Private Server.But I am not clear about something. I created a free website in
a free web host service (zymic.com) and uploaded some simple html files there.
The process was easy and I can simply enter my url to access this html files in
the web browser from every computer.But no Geoserver matters so far, just
simple html pages.Can anybody explain some simple steps how would be the
approach to open a Geoserver map through the web browser after I will install
Geoserver in a Virtual Private Server?
RegardsArdit
> From: [email protected]
> To: [email protected]
> CC: [email protected]; [email protected]
> Date: Thu, 24 Nov 2011 08:42:50 +0100
> Subject: Re: VS: [Geoserver-users] Am I publishing my maps on the internet?
>
> Ok, no problem.
> I just wanted to check if I got something backwards.
>
> Just to clarify; the fact that he can browse the internet does not mean
> that he has port 80 open to the world. Just that the server he browses to
> does. As a client you will negotiate with the server about a port with a
> high number to do the acctual tcp communication over. Port 80 is just the
> servers listening port for new connections.
> In Ardit's case there is also a router between the client and the server
> in the port negotiation.
>
> Atleast, that's what I remember from my network communications class at
> the university. But I'm not saying I'm 100% right. I haven't verified it.
>
> Cheers,
> Olle
>
> Den 11/24/11 8:30 AM skrev Rahkonen Jukka <[email protected]>:
>
> >Hi,
> >
> >Perhaps I answered a bit too fast. I was just thinking that if the user
> >can browse Internet with that computer it is having the port 80 open for
> >the world too with some IP address. Unfortunately I realised that I do
> >not know much enough about network administrating and my suggestion can
> >be of no value.
> >
> >-Jukka Rahkonen-
> >
> >Olle Markljung wrote:
> >>
> >> Just qurious,
> >> How would that help the fact that his machine is on a local
> >> network and that he can't access the (school's?) router? No
> >> outside ports will be forwarded to his machine, right?
> >>
> >> In my world, your suggestion would be valid if the router
> >> would be configured with one public incoming ip and one
> >> internal for each machine and that port 80 is opened up as default.
> >>
> >> Perhaps I missunderstood the settings in our case here.
> >>
> >>
> >> 24 nov 2011 kl. 07:36 skrev "Rahkonen Jukka"
> >> <[email protected]>:
> >>
> >> > Hi,
> >> >
> >> > Make your Geoserver to run in the default https post 80, or
> >> setup a Apache proxy for forwarding traffic from 80 to 8080.
> >> >
> >> > -Jukka Rahkonen-
> >> > ________________________________
> >> > Lähettäjä: Olle Markljung [[email protected]]
> >> > Lähetetty: 24. marraskuuta 2011 8:25
> >> > Vastaanottaja: Ardit Sulce
> >> > Kopio: Geoserver User List
> >> > Aihe: Re: [Geoserver-users] Am I publishing my maps on the internet?
> >> >
> >> > Hmm perhaps you are stuck.
> >> >
> >> > There might exist ways to go around it if you have access
> >> to an outside server to which you set up a form of ssh-tunnelling.
> >> > But, if you have access to the outside server perhaps you
> >> can put your Geoserver there?
> >> >
> >> > If you have a machine outside (perhaps at home) that can
> >> get a public (permanent or dynamic) ip-address everything
> >> will be much easier.
> >> >
> >> > Good luck,
> >> > Olle
> >> >
> >> > 24 nov 2011 kl. 03:30 skrev "Ardit Sulce"
> >> <[email protected]<mailto:[email protected]>>:
> >> >
> >> > Hello Olle,
> >> >
> >> > Thank you! I see your point. But I don´t have access to the
> >> router settings. I am just connecting to the university
> >> wireless network. So, as far as I understand now, there is no
> >> way to publish my maps from my computer (i.e. webserver), if
> >> I am connected to a wireless network, to which I don´t have
> >> the rights to configure (i.e. open the port, setup forwarding etc).
> >> >
> >> >
> >> > ________________________________
> >> > From: <mailto:[email protected]>
> >> [email protected]<mailto:[email protected]>
> >> > To: <mailto:[email protected]>
> >> [email protected]<mailto:[email protected]>
> >> > CC: <mailto:[email protected]>
> >> [email protected]<mailto:geoserver-users@l
> >ists.sourceforge.net>
> >> > Date: Wed, 23 Nov 2011 20:08:15 +0100
> >> > Subject: Re: [Geoserver-users] Am I publishing my maps on
> >> the internet?
> >> >
> >> > Have you opened up port 8080 in your routers settings?
> >> > You'll probably also will need to set up port forwarding in
> >> the router so that requests to your routers public ip on port
> >> 8080 will be forwarded to the machine with Geoserver.
> >> >
> >> > Good luck,
> >> > Olle
> >> >
> >> >
> >> >
> >> > 23 nov 2011 kl. 19:44 skrev "Ardit Sulce"
> >> <<mailto:[email protected]>[email protected]<mailto:
> >[email protected]>>:
> >> >
> >> > Hello, this is my first post in this list.
> >> > I´ve been trying to work on Geoserver. So far, I have
> >> deployed it inside Apache Tomcat and I can successfully see
> >> my maps through my internet browsers. I also can access this
> >> maps from another computer by entering my Tomcat Apache
> >> server IP (exactly, something like this:
> >> 10.12.10.12:8080/etc....) to the internet browser of the
> >> other computer. But, I can access these maps from the other
> >> computer only when the other computer is conected to the same
> >> wireless network with my computer (the computer where
> >> geoserver resides).
> >> > So, my first question is: Am I really publishing my maps on
> >> the internet?
> >> > And if yes, why the other computer cannot see my maps when
> >> it is connected to a wireless network different from mine?
> >> >
> >> >
> >> >
> >> --------------------------------------------------------------
> >> ----------------
> >> > All the data continuously generated in your IT infrastructure
> >> > contains a definitive record of customers, application performance,
> >> > security threats, fraudulent activity, and more. Splunk takes this
> >> > data and makes sense of it. IT sense. And common sense.
> >> > <http://p.sf.net/sfu/splunk-novd2d>http://p.sf.net/sfu/splunk-novd2d
> >> > _______________________________________________
> >> > Geoserver-users mailing list
> >> >
> >> <mailto:[email protected]>Geoserver-users@
> >lists.sourceforge.net<mailto:[email protected]>
> >> >
> >> <https://lists.sourceforge.net/lists/listinfo/geoserver-users>
> >> https://lists.sourceforge.net/lists/listinfo/geoserver-users
> >>
>
------------------------------------------------------------------------------
All the data continuously generated in your IT infrastructure
contains a definitive record of customers, application performance,
security threats, fraudulent activity, and more. Splunk takes this
data and makes sense of it. IT sense. And common sense.
http://p.sf.net/sfu/splunk-novd2d
_______________________________________________
Geoserver-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/geoserver-users
