It seems like that is the problem. Ipconfig /release or disabling net conn in win before reboot doesnt help. Rebooting modem smtimes helps but mostly not. Is it posible to somehow configure dhcp client to use lease from windows?
On 1/20/08, Tony Davison <[EMAIL PROTECTED]> wrote: > On Saturday 19 January 2008 22:09:50 Marko Kocić wrote: > > > I wonder if my similar problem is related to what you report here: I am > > > using dhcpcd and ifplug with my ADSL router, which acts as the dhcp > > > server on my LAN. For some reason ifplug does not always manage to get > > > an IP address from the router and I end up with an APIPA address. > > > /etc/init.d/net.eth0 stop/start gets it going again. This problem only > > > occurs if I disconnect and then reconnect the ethernet cable. No such > > > problem exists when I boot the machine with the cable already connected > > > to the NIC. I haven't changed timeouts or anything else from the dhcpcd > > > defaults. I have always attributed this problem to a somewhat slow dhcp > > > server on the router. > > > > It is similar, with a difference that /etc/init.d/net.eth0 restart > > doesn't help. I tried > > enlarging timeout but with no help. > > > > > As a note: WinXP machines do not have any such problem. Even though > > > they may end up with a APIPA address, they will in minute or so drop it > > > and acquire a 10.10.10.XXX domain address from the router. dhcpcpd does > > > not seem to have this flexibility. > > > > I noticed that in most cases after I boot to windows, when I reboot > > back to linux I can't connect. > > When I reboot back to windows, net is up. > > > > When it fails I noticed that it send DHCP requests, but doesn't get a > > response. > > > > I tried dhclient, dhcpd and pump, and the results are allways the > > same. It happens in the evenings, when internet traffic is high. > > Windows is not releasing the lease correctly, so the CM ignores request from > the same MAC address for a new leasr, workround is to reboot the cm whem you > reboot to gentoo. > > This works in the UK YMMV elsewhere. > > -- > Tony Davison > -- > [email protected] mailing list > >
