On (11/08/07 08:55) Mick wrote: > On Sunday 29 July 2007 17:46, Rumen Yotov wrote: > > On (29/07/07 18:05) Jakob wrote: > > > > Anything else I could try? How do I troubleshoot it? > > > > > > Have a look at the log files is always a good way to troubleshoot ;-) > > > what does dmesg and /var/log/messages say about eth0 or 8139? > > > -- > > > [EMAIL PROTECTED] mailing list > > > > Hi, > > > > Could also try the latest (~x86) kernel - 2.6.22-r2 > > I've had a chance to look at this machine again. I haven't transferred the > relevant gentoo-sources to compile 2.6.22-r2, so I am still on 2.6.21-r4. > These are some relevant logs. The entries after [drm] were created when I > manually tried to load the device and run dhcpcd: > > dmesg > =============================================== > eth0: link up, 100Mbps, full-duplex, lpa 0x41E1 > [drm] Setting GART location based on new memory map > [drm] Loading R300 Microcode > [drm] writeback test succeeded in 1 usecs > NETDEV WATCHDOG: eth0: transmit timed out > [drm] Loading R300 Microcode > eth0: link up, 100Mbps, full-duplex, lpa 0x41E1 > NETDEV WATCHDOG: eth0: transmit timed out > eth0: Transmit timeout, status 0d 0000 c07f media 10. > eth0: Tx queue start entry 4 dirty entry 0. > eth0: Tx descriptor 0 is 00082156. (queue head) > eth0: Tx descriptor 1 is 00082156. > eth0: Tx descriptor 2 is 00082156. > eth0: Tx descriptor 3 is 00082156. > eth0: link up, 100Mbps, full-duplex, lpa 0x41E1 > =============================================== > > /var/log/syslog > =============================================== > Aug 11 08:33:27 compaq eth0: link up, 100Mbps, full-duplex, lpa 0x41E1 > Aug 11 08:33:39 compaq dhcpcd[6552]: eth0: dhcpcd 3.0.16 starting > Aug 11 08:33:39 compaq dhcpcd[6552]: eth0: hardware address = > 00:11:2f:d7:f1:af > Aug 11 08:33:39 compaq dhcpcd[6552]: eth0: broadcasting for a lease > Aug 11 08:33:57 compaq NETDEV WATCHDOG: eth0: transmit timed out > Aug 11 08:33:59 compaq dhcpcd[6552]: eth0: timed out > Aug 11 08:33:59 compaq dhcpcd[6552]: eth0: exiting > Aug 11 08:34:00 compaq eth0: Transmit timeout, status 0d 0000 c07f media 10. > Aug 11 08:34:00 compaq eth0: Tx queue start entry 4 dirty entry 0. > Aug 11 08:34:00 compaq eth0: Tx descriptor 0 is 00082156. (queue head) > Aug 11 08:34:00 compaq eth0: Tx descriptor 1 is 00082156. > Aug 11 08:34:00 compaq eth0: Tx descriptor 2 is 00082156. > Aug 11 08:34:00 compaq eth0: Tx descriptor 3 is 00082156. > Aug 11 08:34:24 compaq cron[6224]: (root) MAIL (mailed 76 bytes of output but > go > t status 0x0001 ) > =============================================== > -- > Regards, > Mick Hi,
I had some very strange problems with Davicom net-card, but only with 2.6.21-r4. Both 2.6.20-r8 & 2.6.22-r2 work flawlessly. The connection breaks suddenly (suspect some ACPI issue). Check b.g.o HTH. Rumen -- [EMAIL PROTECTED] mailing list
