Dnia niedziela, 24 września 2006 11:51, Stephen Liu napisał: > I'm suffering poweroff problem, on exiting "System halted" but not > poweroff.
First of all - you may try the installation CD of Gentoo - boot it and give 'halt -p' at command prompt. If it switches off, that means error in your config. If it doesn't, this might be the hardware fault. Put some light and describe your hardware. Especially - which motherboard model, drop your 'lspci' output. Contents of '/var/log/dmesg' might also be helpful. The latter might be too big for this mailing list, so don't hesitate to drop it gzipped directly to my address. By the way - did you inspect your BIOS settings for ACPI/power management misconfiguration? If you want, I may drop you my kernel configuration (AMD64, Nforce3 based mainboard) - due to my work it covers all usable filesystems and most IPv4 toys. It does switch off without problem - you may use it as a starting point for experiments. -- Pawel Kraszewski www.kraszewscy.net -- gentoo-user@gentoo.org mailing list
