My camera used to come up fine and at some point it broke and I can't figure out what changed, though no doubt it is related to a kernel upgrade. It might have been the switch to udev. I've been though the howto's and I seem to have all the correct modules (compiled in, not loaded if that matters). Dmesg says:
usb 4-2: new full speed USB device using uhci_hcd and address 5 but that is all, nothing about scsi emulation. Could that be related? One of the howtos mentioned it, but I think that was related to 2.4 kernels. Mounting (which used to work) now says: # mount /dev/sda1 /mnt/camera mount: /dev/sda1 is not a valid block device lsusb says: # lsusb Bus 005 Device 001: ID 0000:0000 Bus 004 Device 005: ID 04a9:30b5 Canon, Inc. PowerShot A75 Bus 004 Device 001: ID 0000:0000 Bus 003 Device 001: ID 0000:0000 Bus 002 Device 001: ID 0000:0000 Bus 001 Device 001: ID 0000:0000 I'm stumped about how to approach this problem. Appreciate any ideas. Thanks! -- gentoo-user@gentoo.org mailing list
