Hemmann, Volker Armin <volker.armin.hemmann <at> tu-clausthal.de> writes:
>
> On Saturday 18 February 2006 18:25, Andrew Gaydenko wrote:
> > Hi!
> >
> > Is there a tool to identify a CD/DVD/R/RW-manufacturer?
>
> the drive?
> hdparm
>
> man hdparm,
hdparm i /dev/hdc
Model=TOSHIBA DVD-ROM SD-R2412, FwRev=1015, SerialNo=Z34A308331
Config={ Fixed Removeable DTR<=5Mbs DTR>10Mbs nonMagnetic }
RawCHS=0/0/0, TrkSize=0, SectSize=0, ECCbytes=0
BuffType=unknown, BuffSize=2048kB, MaxMultSect=0
(maybe): CurCHS=0/0/0, CurSects=0, LBA=yes, LBAsects=0
IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: sdma0 sdma1 sdma2 mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 *udma2
AdvancedPM=no
Drive conforms to: ATA/ATAPI-5 T13 1321D revision 3:
hdparm -I /dev/hdc
ATAPI CD-ROM, with removable media
Model Number: TOSHIBA DVD-ROM SD-R2412
Serial Number: Z34A308331
Firmware Revision: 1015
Standards:
Used: ATAPI for CD-ROMs, SFF-8020i, r2.5
Supported: CD-ROM ATAPI-2
Configuration:
DRQ response: 50us.
Packet size: 12 bytes
Capabilities:
LBA, IORDY(can be disabled)
Buffer size: 2048.0kB
DMA: sdma0 sdma1 sdma2 mdma0 mdma1 mdma2 udma0 udma1 *udma2
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=120ns IORDY flow control=120ns
HW reset results:
CBLID- above Vih
Device num = 0 determined by CSEL
HTH,
James
--
gentoo-user@gentoo.org mailing list
