I recently rebuilt my kernel and my audigy2 sound card stopped working. I reverted to the way the kernel was before, but it still doesn't work.
The change I made was to build the emu10k1 driver into the kernel, instead of having it as modules, as I had before then. The reason I did this was to try to get sound to resume properly after sleep. But as I said, now that emu10k1 is in modules again it still doesn't work, not even after running alsaconf. Any help much appreciated. Thanks. And here is some more info: This is the kind of thing I get when I launch an alsa client (e.g. qjackctl): loading driver .. apparent rate = 48000 creating alsa driver ... hw:0|hw:0|1024|2|48000|0|0|nomon|swmeter|-|32bit ALSA: Cannot open PCM device alsa_pcm for playback. Falling back to capture-only mode cannot load driver module alsa This is from dmesg: EMU10K1_Audigy: probe of 0000:02:09.0 failed with error -12 This is what lsmod says: Module Size Used by fglrx 431840 7 usb_storage 48064 0 eth1394 16008 0 floppy 50180 0 pcspkr 1796 0 tdfxfb 9864 0 ohci1394 27444 0 ieee1394 78168 2 eth1394,ohci1394 emu10k1_gp 2944 0 gameport 11144 2 emu10k1_gp snd_intel8x0 25756 0 i2c_i801 7308 0 intel_agp 18076 1 subfs 6144 5 realtime 7560 0 snd_emu10k1 93348 0 snd_ac97_codec 79008 2 snd_intel8x0,snd_emu10k1 snd_ac97_bus 2048 1 snd_ac97_codec snd_util_mem 3456 1 snd_emu10k1 snd_hwdep 6688 1 snd_emu10k1 This is what lspci says: 00:00.0 Host bridge: Intel Corporation 82865G/PE/P DRAM Controller/Host-Hub Interface (rev 02) 00:01.0 PCI bridge: Intel Corporation 82865G/PE/P PCI to AGP Controller (rev 02) 00:1d.0 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1 (rev 02) 00:1d.1 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2 (rev 02) 00:1d.2 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3 (rev 02) 00:1d.3 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #4 (rev 02) 00:1d.7 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev c2) 00:1f.0 ISA bridge: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge (rev 02) 00:1f.1 IDE interface: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE Controller (rev 02) 00:1f.3 SMBus: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus Controller (rev 02) 00:1f.5 Multimedia audio controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller (rev 02) 01:00.0 VGA compatible controller: ATI Technologies Inc RV280 [Radeon 9200 SE] (rev 01) 01:00.1 Display controller: ATI Technologies Inc RV280 [Radeon 9200 SE] (Secondary) (rev 01) 02:05.0 Ethernet controller: Marvell Technology Group Ltd. 88E8001 Gigabit Ethernet Controller (rev 13) 02:09.0 Multimedia audio controller: Creative Labs SB Audigy (rev 04) 02:09.1 Input device controller: Creative Labs SB Audigy MIDI/Game port (rev 04) 02:09.2 FireWire (IEEE 1394): Creative Labs SB Audigy FireWire Port (rev 04) 02:0b.0 Communication controller: Agere Systems LT WinModem (rev 02) 02:0c.0 VGA compatible controller: 3Dfx Interactive, Inc. Voodoo Banshee (rev 03) Robert -- Robert Persson Conspiracy Bears: Once upon a time there were lots of conspiracy bears... -- gentoo-user@gentoo.org mailing list
