Mike Kenny wrote: > I am trying to install gentoo from the web by following the steps in > the Gentoo Linux x86 Handbook for a stage 1 install. This works well > up to a point. > > When I execute > # emerge --emptytree system > after some time the process terminates with a message similar to > > cd ../obj_s; -I../c++ -I../include > -I/var/tmp/portage/ncurses-5.4-r6/work/ncurses-5.4/c++ -DHAVE_CONFIG_H > -I/var/tmp/portage/ncurses-5.4-r6/work/ncurses-5.4/c++/../include -I. > -I../include -D_GNU_SOURCE -DNDEBUG -O2 -mcpu=i686 > -fomit-frame-pointer -fPIC -c > /var/tmp/portage/ncurses-5.4-r6/work/ncurses-5.4/c++/cursesf.cc > /bin/sh: line 1: -I../c++: No such file or directory > make: *** [../obj_s/cursesf.o] Error 127 > > (I say similar because the output above is from executing make within > the relevant directory -var/tmp/portage/ncurses-5.4-r6/work/narrowc/c++) > > Inspecting the Makefile shows that there is no value defind for CXX. > As g++ does not appear to exist within my chrooted environment I did > attempt to set this to gcc, but this failed with a notice the c++ was > not installed. > > I believe I must have messed up something in creating my chroot > environment as g++ exists elsewhere. But I can't figure what that > might have been. > > I have also tried executing the instructions for installing gcc 3.4 in > the hope that this would give me a c++ compiler, but this failed with > the same error as above. > > Any ideas on how I should proceed? I am loathe to restart as a) I > don't yet see what I can do differently and b) I have a 2GB cap on my > bandwidth for December and have already used over 25% of this. > > Thanks, > Well, I may have ran into this before. Type in df and see if your disk is full. It is worth a try at least.
Dale :-) -- To err is human, I'm most certainly human. -- gentoo-user@gentoo.org mailing list
