Yes, everything mounts when I explicitly say swapon -a. No problems in
/var/log/messages.
Here's the output of swapon -sv:
# swapon -sv
Filename Type Size Used Priority
/swap file 6291452 0 5
/dev/sdb1 partition 1099772 776 10
/lcl/WDC_WD20EFRX-68EUZN0_WD-yyyyyyyy/1/swap file 3071996
0 1
On 2020-03-04 10:43, Michael wrote:
On Wednesday, 4 March 2020 09:24:31 GMT n952162 wrote:
On 2020-03-04 10:10, Michael wrote:
On Wednesday, 4 March 2020 08:09:45 GMT n952162 wrote:
Hi,
I have 3 swap devices and files. At boot, it seems indeterminate which
ones get "mounted" (as swap areas).
Does anyone have an idea why they're not all mounted?
Here are the swap lines from my fstab:
#LABEL=swap none swap sw 0 0
/dev/disk/by-id/ata-TOSHIBA_DT01ACA300_xxxxxxxx-part1 none swap
sw,pri=10 0 0
/swap none swap sw,pri=5 0 0
/lcl/WDC_WD20EFRX-68EUZN0_WD-yyyyyyyyyy/1/swap none swap
sw,pri=1 0 0
The second entry is missing the device you intend to mount.
When you list the first and third devices do you see anything wrong with
them?
When you try to enable them manually with 'swapon -v' what do you get?
PS. If any of these swap block devices are actually files within a fs make
sure you first fill them up with dd, because files with holes in them
could
fail to be enabled. Also some fs (btrfs?) are not good candidates for
having swap files on them, if they move data around with cow.
The second and third entries are files, created with dd(1), from
/dev/zeros, as shown on the mkswap(8) man page. No word in
/var/log/messages for non-mounted swaps.
I assume you have run something like this:
dd if=/dev/zero of=/swap bs=4096 count=xxxxxxxx
mkswap -c -f -L moreswap /swap
swapon -v -o pri=5 /swap
When you run 'swapon -v /swap' does it enable it? Is dmesg happy?
