On Wed, Mar 29, 2017 at 11:16 AM, Kai Krakow <hurikha...@gmail.com> wrote: > Am Tue, 28 Mar 2017 21:19:29 +0100 > schrieb Jorge Almeida <jjalme...@gmail.com>: >
> > I'm using a 400 MBps cable link here, directly connected, I can get 48 > MBytes/s out of it (which should be very close if not even little above > 400 MBps), even when using the TP-Link as switch. If I use bridge mode > and use TP-Link as router, it stop roughly around 300 MBps. My previous > router even stopped at 30 MBps. It's a CPU issue. The internal CPU > needs to do layer 3 routing. Layer 2 routing (switching) can be done by > hardware. Login to your router and see how the CPU is loaded. Use top. > If you still loaded it with its original hardware, you cannot do this, > tho. Try OpenWRT (that is what I used). You mean, check the % of cpu usage? It must be at about 100%, right? > > I think there's a database which contains throughput test results with > different router hardware and different firmware. However, with a quick > google search, I cannot find it. You may have more luck. > > [some moments later] > > I think it's here: > https://www.smallnetbuilder.com/tools/charts/router/bar/180-lan-to-wan-tcp/31 > I think I need wan-to-lan. Anyway, those numbers seem too good to be true. 919Mbps with a $61 TP-Link AC1200? What would explain my poor results? Jorge
