On 31 July 2014 16:03:09 CEST, Alec Ten Harmsel <a...@alectenharmsel.com> wrote:
>I can't comment on a long-term, real, proper solution, but for right
>now
>
> emerge --oneshot dev-perl/XML-Parser
>
>should at least allow you to continue building colord.
>
Please do not top post.
A long term solution is listed at the bottom of the output from perl-cleaner.
>On Thu 31 Jul 2014 09:58:17 AM EDT, Gevisz wrote:
>> On Thu, 31 Jul 2014 15:36:38 +0200
>> Alan McKinnon <alan.mckin...@gmail.com> wrote:
>>
>>> On 31/07/2014 15:29, Gevisz wrote:
>>>> In my today's system update I have got the following error message:
>>>>
>>>> * ERROR: x11-misc/colord-1.2.1-r1::gentoo failed (configure
>phase):
>>>> * econf failed
>>>
>>> The actual error message is earlier than this point[1]. Please go
>>> through that referenced log, find the error message and report
>>
>> Yes, you are right. Earlier in the colord emege log
>> I have found the following:
>>
>> checking for XML::Parser... configure: error: XML::Parser perl module
>> is required for intltool
>>
>> And even earlier in the emerge log were the following:
>>
>> * Messages for package dev-lang/perl-5.18.2-r1:
>>
>> * UPDATE THE PERL MODULES:
>> * After updating dev-lang/perl you must reinstall
>> * the installed perl modules.
>> * Use: perl-cleaner --all
>>
>> And after running just now # perl-cleaner --all
>> I have got the real trouble. The output is below.
>> Shall I rename the Subject to "perl failed to upgrade"?
>>
>> # perl-cleaner --all
>>
>> * Beginning a clean up of .ph files
>> * Excluding files for 5.18.2 and 5.18.2/x86_64-linux from cleaning
>>
>> * Locating ph files for removal
>>
>> * Updating ph files.
>> * Ignore all "No such file..." messages!
>> Can't open machine/ansi.h: No such file or directory
>> Can't open sys/_types.h: No such file or directory
>> Can't open gnu/stubs-x32.h: No such file or directory
>> Can't open gnu/stubs-x32.h: No such file or directory
>> Can't open gnu/stubs-x32.h: No such file or directory
>> Can't open gnu/stubs-x32.h: No such file or directory
>>
>> * Locating packages for an update
>> * Locating ebuilds linked against libperl
>> * Adding to list: dev-perl/File-DesktopEntry:0
>> * Adding to list: dev-perl/XML-NamespaceSupport:0
>> * Adding to list: dev-perl/Authen-SASL:0
>> * Adding to list: dev-perl/OLE-StorageLite:0
>> * Adding to list: dev-perl/Digest-Perl-MD5:0
>> * Adding to list: dev-perl/XML-Simple:0
>> * Adding to list: dev-perl/Digest-HMAC:0
>> * Adding to list: dev-perl/Net-SMTP-SSL:0
>> * Adding to list: dev-perl/XML-SAX-Base:0
>> * Adding to list: dev-perl/File-MimeInfo:0
>> * Adding to list: dev-perl/Unicode-Map:0
>> * Adding to list: dev-perl/XML-LibXML:0
>> * Adding to list: dev-perl/Locale-gettext:0
>> * Adding to list: dev-perl/Crypt-RC4:0
>> * Adding to list: dev-perl/File-BaseDir:0
>> * Adding to list: dev-perl/XML-Parser:0
>> * Adding to list: dev-perl/XML-SAX:0
>> * Adding to list: dev-perl/Spreadsheet-ParseExcel:0
>> * Adding to list: dev-perl/IO-stringy:0
>> * Adding to list: perl-core/IPC-Cmd:0
>> * virtual/perl-IPC-Cmd:0
>> * Adding to list: perl-core/Module-CoreList:0
>> * virtual/perl-Module-CoreList:0
>> * Adding to list: perl-core/IO:0
>> * virtual/perl-IO:0
>> * Adding to list: perl-core/File-Spec:0
>> * virtual/perl-File-Spec:0
>> * Adding to list: perl-core/CPAN-Meta:0
>> * virtual/perl-CPAN-Meta:0
>> * Adding to list: perl-core/Module-Build:0
>> * virtual/perl-Module-Build:0
>> * Adding to list: perl-core/ExtUtils-ParseXS:0
>> * virtual/perl-ExtUtils-ParseXS:0
>> * Adding to list: perl-core/version:0
>> * virtual/perl-version:0
>> * Adding to list: perl-core/Archive-Tar:0
>> * virtual/perl-Archive-Tar:0
>> * Adding to list: perl-core/Module-Load:0
>> * virtual/perl-Module-Load:0
>> * Adding to list: perl-core/Test-Harness:0
>> * virtual/perl-Test-Harness:0
>> * Adding to list: perl-core/CPAN-Meta-Requirements:0
>> * virtual/perl-CPAN-Meta-Requirements:0
>> * Adding to list: perl-core/Compress-Raw-Bzip2:0
>> * virtual/perl-Compress-Raw-Bzip2:0
>> * Adding to list: perl-core/IO-Compress:0
>> * virtual/perl-IO-Compress:0
>> * Adding to list: perl-core/ExtUtils-MakeMaker:0
>> * virtual/perl-ExtUtils-MakeMaker:0
>> * Adding to list: perl-core/Parse-CPAN-Meta:0
>> * virtual/perl-Parse-CPAN-Meta:0
>> * Adding to list: perl-core/Digest-MD5:0
>> * virtual/perl-Digest-MD5:0
>> * Adding to list: perl-core/ExtUtils-Manifest:0
>> * virtual/perl-ExtUtils-Manifest:0
>> * Adding to list: perl-core/Module-Metadata:0
>> * virtual/perl-Module-Metadata:0
>> * Adding to list: perl-core/Scalar-List-Utils:0
>> * virtual/perl-Scalar-List-Utils:0
>> * Adding to list: perl-core/Compress-Raw-Zlib:0
>> * virtual/perl-Compress-Raw-Zlib:0
>> * Adding to list: perl-core/Params-Check:0
>> * virtual/perl-Params-Check:0
>> * Adding to list: perl-core/Time-Local:0
>> * virtual/perl-Time-Local:0
>> * Adding to list: perl-core/ExtUtils-CBuilder:0
>> * virtual/perl-ExtUtils-CBuilder:0
>> * Adding to list: perl-core/Module-Load-Conditional:0
>> * virtual/perl-Module-Load-Conditional:0
>> * Adding to list: perl-core/CPAN-Meta-YAML:0
>> * virtual/perl-CPAN-Meta-YAML:0
>> * emerge -vD1 --backtrack=30 dev-perl/File-DesktopEntry:0
>> dev-perl/XML-NamespaceSupport:0 dev-perl/Authen-SASL:0
>> dev-perl/OLE-StorageLite:0 dev-perl/Digest-Perl-MD5:0
>> dev-perl/XML-Simple:0 dev-perl/Digest-HMAC:0
>dev-perl/Net-SMTP-SSL:0
>> dev-perl/XML-SAX-Base:0 dev-perl/File-MimeInfo:0
>> dev-perl/Unicode-Map:0 dev-perl/XML-LibXML:0
>> dev-perl/Locale-gettext:0 dev-perl/Crypt-RC4:0
>> dev-perl/File-BaseDir:0 dev-perl/XML-Parser:0 dev-perl/XML-SAX:0
>> dev-perl/Spreadsheet-ParseExcel:0 dev-perl/IO-stringy:0
>> perl-core/IPC-Cmd:0 virtual/perl-IPC-Cmd:0
>> perl-core/Module-CoreList:0 virtual/perl-Module-CoreList:0
>> perl-core/IO:0 virtual/perl-IO:0 perl-core/File-Spec:0
>> virtual/perl-File-Spec:0 perl-core/CPAN-Meta:0
>> virtual/perl-CPAN-Meta:0 perl-core/Module-Build:0
>> virtual/perl-Module-Build:0 perl-core/ExtUtils-ParseXS:0
>> virtual/perl-ExtUtils-ParseXS:0 perl-core/version:0
>> virtual/perl-version:0 perl-core/Archive-Tar:0
>> virtual/perl-Archive-Tar:0 perl-core/Module-Load:0
>> virtual/perl-Module-Load:0 perl-core/Test-Harness:0
>> virtual/perl-Test-Harness:0 perl-core/CPAN-Meta-Requirements:0
>> virtual/perl-CPAN-Meta-Requirements:0
>perl-core/Compress-Raw-Bzip2:0
>> virtual/perl-Compress-Raw-Bzip2:0 perl-core/IO-Compress:0
>> virtual/perl-IO-Compress:0 perl-core/ExtUtils-MakeMaker:0
>> virtual/perl-ExtUtils-MakeMaker:0 perl-core/Parse-CPAN-Meta:0
>> virtual/perl-Parse-CPAN-Meta:0 perl-core/Digest-MD5:0
>> virtual/perl-Digest-MD5:0 perl-core/ExtUtils-Manifest:0
>> virtual/perl-ExtUtils-Manifest:0 perl-core/Module-Metadata:0
>> virtual/perl-Module-Metadata:0 perl-core/Scalar-List-Utils:0
>> virtual/perl-Scalar-List-Utils:0 perl-core/Compress-Raw-Zlib:0
>> virtual/perl-Compress-Raw-Zlib:0 perl-core/Params-Check:0
>> virtual/perl-Params-Check:0 perl-core/Time-Local:0
>> virtual/perl-Time-Local:0 perl-core/ExtUtils-CBuilder:0
>> virtual/perl-ExtUtils-CBuilder:0
>perl-core/Module-Load-Conditional:0
>> virtual/perl-Module-Load-Conditional:0 perl-core/CPAN-Meta-YAML:0
>> virtual/perl-CPAN-Meta-YAML:0
>>
>> These are the packages that would be merged, in order:
>>
>> Calculating dependencies... done!
>> [ebuild R ] virtual/perl-File-Spec-3.400.0-r2 0 kB
>> [ebuild U ] virtual/perl-version-0.990.200-r1 [0.990.100] 0 kB
>> [ebuild R ] virtual/perl-Scalar-List-Utils-1.270.0-r2 0 kB
>> [ebuild R ] dev-perl/XML-NamespaceSupport-1.110.0 0 kB
>> [ebuild R ] virtual/perl-Module-Build-0.400.300-r1 0 kB
>> [ebuild R ] virtual/perl-Parse-CPAN-Meta-1.440.400-r1 0 kB
>> [ebuild R ] virtual/perl-CPAN-Meta-YAML-0.8.0-r2 0 kB
>> [ebuild R ] virtual/perl-CPAN-Meta-2.120.921-r2 0 kB
>> [ebuild R ] virtual/perl-Module-Metadata-1.0.11-r1 0 kB
>> [ebuild R ] virtual/perl-Params-Check-0.360.0-r1 0 kB
>> [ebuild U ] virtual/perl-ExtUtils-CBuilder-0.280.210-r1
>> [0.280.205] 0 kB [ebuild R ] dev-perl/OLE-StorageLite-0.190.0 0
>kB
>> [ebuild R ] dev-perl/Digest-Perl-MD5-1.800.0 0 kB
>> [ebuild R ] dev-perl/XML-SAX-Base-1.80.0 0 kB
>> [ebuild R ] dev-perl/Unicode-Map-0.112.0 0 kB
>> [ebuild R ] dev-perl/Crypt-RC4-2.020.0 0 kB
>> [ebuild R ] dev-perl/XML-Parser-2.410.0 0 kB
>> [ebuild R ] dev-perl/IO-stringy-2.110.0 0 kB
>> [ebuild U ] virtual/perl-IPC-Cmd-0.800.0-r1 [0.780.0] 0 kB
>> [ebuild U ] virtual/perl-Module-CoreList-3.30.0 [2.840.0] 0 kB
>> [ebuild U ] virtual/perl-IO-1.280.0-r1 [1.25] 0 kB
>> [ebuild R ] virtual/perl-ExtUtils-ParseXS-3.180.0-r2 0 kB
>> [ebuild R ] virtual/perl-Archive-Tar-1.900.0-r2 0 kB
>> [ebuild R ] virtual/perl-Module-Load-0.240.0-r1 0 kB
>> [ebuild R ] virtual/perl-Test-Harness-3.260.0-r2 0 kB
>> [ebuild R ] virtual/perl-CPAN-Meta-Requirements-2.122.0-r2 0 kB
>> [ebuild R ] virtual/perl-Compress-Raw-Bzip2-2.60.0-r2 0 kB
>> [ebuild R ] virtual/perl-IO-Compress-2.60.0-r1 0 kB
>> [ebuild U ] virtual/perl-ExtUtils-MakeMaker-6.660.0-r1 [6.640.0]
>0
>> kB [ebuild R ] virtual/perl-Digest-MD5-2.520.0-r2 0 kB
>> [ebuild U ] virtual/perl-ExtUtils-Manifest-1.630.0-r1 [1.610.0]
>0
>> kB [ebuild R ] virtual/perl-Compress-Raw-Zlib-2.60.0-r2 0 kB
>> [ebuild R ] virtual/perl-Module-Load-Conditional-0.540.0-r1 0
>kB
>> [ebuild N ] perl-core/JSON-PP-2.272.0-r1 0 kB
>> [ebuild N ] perl-core/File-Temp-0.220.0-r1 38 kB
>> [ebuild N ] perl-core/Perl-OSType-1.2.0-r1 USE="{-test}" 0 kB
>> [ebuild R ] perl-core/Module-CoreList-2.840.0 0 kB
>> [ebuild R ] perl-core/IO-1.25-r1 0 kB
>> [ebuild R ] perl-core/File-Spec-3.400.0 0 kB
>> [ebuild U ] perl-core/version-0.990.100-r1 [0.990.100] 0 kB
>> [ebuild R ] perl-core/Module-Load-0.240.0 0 kB
>> [ebuild R ] perl-core/Test-Harness-3.260.0 0 kB
>> [ebuild R ] perl-core/Compress-Raw-Bzip2-2.60.0 0 kB
>> [ebuild U ] perl-core/ExtUtils-Manifest-1.610.0-r1 [1.610.0] 0
>kB
>> [ebuild R ] perl-core/Scalar-List-Utils-1.270.0 0 kB
>> [ebuild R ] perl-core/Compress-Raw-Zlib-2.60.0 0 kB
>> [ebuild U ] perl-core/Time-Local-1.230.0-r1 [1.230.0] 0 kB
>> [ebuild R ] virtual/perl-Time-Local-1.230.0-r1 0 kB
>> [ebuild U ] perl-core/CPAN-Meta-YAML-0.8.0-r1 [0.8.0] 0 kB
>> [ebuild R ] dev-perl/File-BaseDir-0.30.0 USE="{-test}" 0 kB
>> [ebuild R ] dev-perl/Spreadsheet-ParseExcel-0.590.0
>USE="unicode
>> -cjk {-test}" 0 kB [ebuild U ] perl-core/IPC-Cmd-0.780.0-r1
>> [0.780.0] 0 kB [ebuild U ] perl-core/ExtUtils-ParseXS-3.180.0-r1
>> [3.180.0] 0 kB [ebuild R ] perl-core/Archive-Tar-1.900.0-r1 0
>kB
>> [ebuild U ] perl-core/CPAN-Meta-Requirements-2.122.0-r1
>[2.122.0]
>> 0 kB [ebuild R ] perl-core/IO-Compress-2.60.0 0 kB
>> [ebuild U ] perl-core/Digest-MD5-2.520.0-r1 [2.520.0] 0 kB
>> [ebuild U ] perl-core/Module-Metadata-1.0.11-r1 [1.0.11] 0 kB
>> [ebuild U ] perl-core/Params-Check-0.360.0-r1 [0.360.0] 0 kB
>> [ebuild R ] perl-core/Module-Load-Conditional-0.540.0 0 kB
>> [ebuild R ] dev-perl/File-DesktopEntry-0.40.0 USE="{-test}" 0
>kB
>> [ebuild R ] dev-perl/Digest-HMAC-1.30.0 0 kB
>> [ebuild U ] perl-core/CPAN-Meta-2.120.921-r1 [2.120.921] 0 kB
>> [ebuild U ] perl-core/Module-Build-0.400.300-r1 [0.400.300]
>> USE="{-test}" 0 kB [ebuild U ]
>> perl-core/Parse-CPAN-Meta-1.440.400-r1 [1.440.400] 0 kB [ebuild U
>> ] perl-core/ExtUtils-CBuilder-0.280.205-r1 [0.280.205] 0 kB [ebuild
>> R ] dev-perl/Authen-SASL-2.160.0 USE="-kerberos" 0 kB [ebuild
>> R ] dev-perl/Net-SMTP-SSL-1.10.0 0 kB [ebuild UD ]
>> dev-lang/perl-5.16.3:0/5.16 [5.18.2-r1:0/5.18] USE="berkdb gdbm
>-debug
>> -doc -ithreads" 0 kB [ebuild U ]
>> perl-core/ExtUtils-MakeMaker-6.640.0-r1 [6.640.0] 0 kB [ebuild R
>]
>> dev-perl/XML-SAX-0.990.0 0 kB [ebuild R ]
>> dev-perl/File-MimeInfo-0.170.0 USE="{-test}" 0 kB [ebuild R ]
>> dev-perl/XML-LibXML-2.1.400 USE="{-test}" 0 kB [ebuild R ]
>> dev-perl/Locale-gettext-1.50.0 0 kB [ebuild R ]
>> dev-perl/XML-Simple-2.200.0 0 kB [blocks B ]
>> <perl-core/Module-CoreList-3.30.0
>("<perl-core/Module-CoreList-3.30.0"
>> is blocking virtual/perl-Module-CoreList-3.30.0) [blocks B ]
>> <perl-core/IPC-Cmd-0.800.0 ("<perl-core/IPC-Cmd-0.800.0" is blocking
>> virtual/perl-IPC-Cmd-0.800.0-r1) [blocks B ]
>> <perl-core/ExtUtils-Manifest-1.630.0
>> ("<perl-core/ExtUtils-Manifest-1.630.0" is blocking
>> virtual/perl-ExtUtils-Manifest-1.630.0-r1) [blocks B ]
>> <perl-core/ExtUtils-MakeMaker-6.660.0
>> ("<perl-core/ExtUtils-MakeMaker-6.660.0" is blocking
>> virtual/perl-ExtUtils-MakeMaker-6.660.0-r1) [blocks B ]
>> <perl-core/IO-1.280.0 ("<perl-core/IO-1.280.0" is blocking
>> virtual/perl-IO-1.280.0-r1) [blocks B ]
>> <perl-core/version-0.990.200 ("<perl-core/version-0.990.200" is
>> blocking virtual/perl-version-0.990.200-r1) [blocks B ]
>> <perl-core/ExtUtils-CBuilder-0.280.210
>> ("<perl-core/ExtUtils-CBuilder-0.280.210" is blocking
>> virtual/perl-ExtUtils-CBuilder-0.280.210-r1)
>>
>> Total: 75 packages (22 upgrades, 1 downgrade, 3 new, 49 reinstalls),
>> Size of downloads: 38 kB Conflict: 7 blocks (7 unsatisfied)
>>
>> !!! Multiple package instances within a single package slot have been
>> pulled !!! into the dependency graph, resulting in a slot conflict:
>>
>> dev-lang/perl:0
>>
>> (dev-lang/perl-5.16.3::gentoo, ebuild scheduled for merge) pulled
>in
>> by =dev-lang/perl-5.16* required by
>> (virtual/perl-ExtUtils-Install-1.580.0-r1::gentoo, installed)
>>
>> (dev-lang/perl-5.18.2-r1::gentoo, installed) pulled in by
>> dev-lang/perl:0/5.18=[-build(-)] required by
>> (dev-perl/URI-1.600.0-r1::gentoo, installed)
>> dev-lang/perl:0/5.18=[-build(-)] required by
>> (dev-perl/Net-SSLeay-1.550::gentoo, installed)
>> dev-lang/perl:0/5.18=[-build(-)] required by
>> (dev-perl/Error-0.170.210::gentoo, installed)
>> dev-lang/perl:0/5.18=[-build(-)] required by
>> (dev-perl/Text-CSV_XS-0.950.0::gentoo, installed)
>> dev-lang/perl:0/5.18=[-build(-)] required by
>> (dev-perl/IO-Socket-SSL-1.953.0::gentoo, installed)
>> dev-lang/perl:0/5.18=[-build(-)] required by
>> (perl-core/Digest-SHA-5.820.0::gentoo, installed)
>> dev-lang/perl:0/5.18=[-build(-)] required by
>> (dev-perl/Algorithm-Diff-1.190.200-r1::gentoo, installed)
>> dev-lang/perl:0/5.18=[-build(-)] required by
>> (dev-vcs/git-1.8.5.5::gentoo, installed) =dev-lang/perl-5.18*
>> required by (virtual/perl-Digest-MD5-2.520.0-r2::gentoo, ebuild
>> scheduled for merge) (and 35 more with the same problems)
>>
>>
>> It may be possible to solve this problem by using package.mask to
>> prevent one of those packages from being selected. However, it is
>also
>> possible that conflicting dependencies exist such that they are
>> impossible to satisfy simultaneously. If such a conflict exists in
>> the dependencies of two different packages, then those packages can
>> not be installed simultaneously.
>>
>> For more information, see MASKED PACKAGES section in the emerge man
>> page or refer to the Gentoo Handbook.
>>
>>
>> * Error: The above package list contains packages which cannot be
>> * installed at the same time on the same system.
>>
>> (virtual/perl-ExtUtils-Manifest-1.630.0-r1::gentoo, ebuild
>scheduled
>> for merge) pulled in by virtual/perl-ExtUtils-Manifest:0
>> >=virtual/perl-ExtUtils-Manifest-1.600.0 required by
>> (perl-core/ExtUtils-MakeMaker-6.640.0-r1::gentoo, ebuild scheduled
>> for merge) =virtual/perl-ExtUtils-Manifest-1.630.0-r1 required by
>> (perl-core/ExtUtils-MakeMaker-6.640.0-r1::gentoo, ebuild scheduled
>> for merge)
>>
>> (virtual/perl-IO-1.280.0-r1::gentoo, ebuild scheduled for merge)
>> pulled in by virtual/perl-IO:0
>> =virtual/perl-IO-1.280.0-r1 required by
>> (perl-core/CPAN-Meta-2.120.921-r1::gentoo, ebuild scheduled for
>> merge) virtual/perl-IO required by
>> (perl-core/CPAN-Meta-2.120.921-r1::gentoo, ebuild scheduled for
>merge)
>>
>> (virtual/perl-Module-CoreList-3.30.0::gentoo, ebuild scheduled for
>> merge) pulled in by =virtual/perl-Module-CoreList-3.30.0 required
>by
>> (perl-core/Module-Load-Conditional-0.540.0::gentoo, ebuild
>scheduled
>> for merge) virtual/perl-Module-CoreList:0
>> >=virtual/perl-Module-CoreList-0.22 required by
>> (perl-core/Module-Load-Conditional-0.540.0::gentoo, ebuild
>scheduled
>> for merge)
>>
>> (perl-core/Module-CoreList-2.840.0::gentoo, ebuild scheduled for
>> merge) pulled in by perl-core/Module-CoreList:0
>>
>> (virtual/perl-version-0.990.200-r1::gentoo, ebuild scheduled for
>> merge) pulled in by >=virtual/perl-version-0.870 required by
>> (perl-core/Module-Metadata-1.0.11-r1::gentoo, ebuild scheduled for
>> merge) >=virtual/perl-version-0.77 required by
>> (perl-core/CPAN-Meta-Requirements-2.122.0-r1::gentoo, ebuild
>> scheduled for merge) =virtual/perl-version-0.990.200-r1 required by
>> (perl-core/CPAN-Meta-2.120.921-r1::gentoo, ebuild scheduled for
>> merge) >=virtual/perl-version-0.82 required by
>> (perl-core/CPAN-Meta-2.120.921-r1::gentoo, ebuild scheduled for
>> merge) =virtual/perl-version-0.990.200-r1 required by
>> (perl-core/Module-Load-Conditional-0.540.0::gentoo, ebuild
>scheduled
>> for merge) =virtual/perl-version-0.990.200-r1 required by
>> (perl-core/Module-Build-0.400.300-r1::gentoo, ebuild scheduled for
>> merge) >=virtual/perl-version-0.87 required by
>> (perl-core/Module-Build-0.400.300-r1::gentoo, ebuild scheduled for
>> merge) virtual/perl-version:0 virtual/perl-version required by
>> (perl-core/Module-Load-Conditional-0.540.0::gentoo, ebuild
>scheduled
>> for merge) =virtual/perl-version-0.990.200-r1 required by
>> (perl-core/CPAN-Meta-Requirements-2.122.0-r1::gentoo, ebuild
>> scheduled for merge) =virtual/perl-version-0.990.200-r1 required by
>> (perl-core/Module-Metadata-1.0.11-r1::gentoo, ebuild scheduled for
>> merge)
>>
>> (virtual/perl-ExtUtils-MakeMaker-6.660.0-r1::gentoo, ebuild
>scheduled
>> for merge) pulled in by virtual/perl-ExtUtils-MakeMaker:0
>> >=virtual/perl-ExtUtils-MakeMaker-6.56 required by
>> (perl-core/CPAN-Meta-2.120.921-r1::gentoo, ebuild scheduled for
>> merge) =virtual/perl-ExtUtils-MakeMaker-6.660.0-r1 required by
>> (perl-core/CPAN-Meta-2.120.921-r1::gentoo, ebuild scheduled for
>merge)
>>
>> (virtual/perl-IPC-Cmd-0.800.0-r1::gentoo, ebuild scheduled for
>merge)
>> pulled in by virtual/perl-IPC-Cmd:0
>> virtual/perl-IPC-Cmd required by
>> (perl-core/ExtUtils-CBuilder-0.280.205-r1::gentoo, ebuild scheduled
>> for merge) =virtual/perl-IPC-Cmd-0.800.0-r1 required by
>> (perl-core/ExtUtils-CBuilder-0.280.205-r1::gentoo, ebuild scheduled
>> for merge)
>>
>> (perl-core/IPC-Cmd-0.780.0-r1::gentoo, ebuild scheduled for merge)
>> pulled in by perl-core/IPC-Cmd:0
>>
>> (perl-core/version-0.990.100-r1::gentoo, ebuild scheduled for
>merge)
>> pulled in by perl-core/version:0
>>
>> (virtual/perl-ExtUtils-CBuilder-0.280.210-r1::gentoo, ebuild
>> scheduled for merge) pulled in by virtual/perl-ExtUtils-CBuilder:0
>> virtual/perl-ExtUtils-CBuilder required by
>> (perl-core/ExtUtils-ParseXS-3.180.0-r1::gentoo, ebuild scheduled
>for
>> merge) >=virtual/perl-ExtUtils-CBuilder-0.27 required by
>> (perl-core/Module-Build-0.400.300-r1::gentoo, ebuild scheduled for
>> merge) =virtual/perl-ExtUtils-CBuilder-0.280.210-r1 required by
>> (perl-core/Module-Build-0.400.300-r1::gentoo, ebuild scheduled for
>> merge) =virtual/perl-ExtUtils-CBuilder-0.280.210-r1 required by
>> (perl-core/ExtUtils-ParseXS-3.180.0-r1::gentoo, ebuild scheduled
>for
>> merge)
>>
>> (perl-core/ExtUtils-Manifest-1.610.0-r1::gentoo, ebuild scheduled
>for
>> merge) pulled in by perl-core/ExtUtils-Manifest:0
>>
>> (perl-core/ExtUtils-MakeMaker-6.640.0-r1::gentoo, ebuild scheduled
>> for merge) pulled in by perl-core/ExtUtils-MakeMaker:0
>>
>> (perl-core/IO-1.25-r1::gentoo, ebuild scheduled for merge) pulled
>in
>> by perl-core/IO:0
>>
>> (perl-core/ExtUtils-CBuilder-0.280.205-r1::gentoo, ebuild scheduled
>> for merge) pulled in by perl-core/ExtUtils-CBuilder:0
>>
>>
>> For more information about Blocked Packages, please refer to the
>> following section of the Gentoo Linux x86 Handbook (architecture is
>> irrelevant):
>>
>> http://www.gentoo.org/doc/en/handbook/handbook-x86.xml?full=1#blocked
>>
>> * perl-cleaner is stopping here:
>> * Fix the problem and start perl-cleaner again.
>> *
>> * If you encounter blockers involving virtuals and perl-core, here
>are
>> * some things to try:
>> * Remove all perl-core packages from your world file
>> * emerge --deselect --ask $(qlist -IC 'perl-core/*')
>> * Update all the installed Perl virtuals
>> * emerge -uD1a $(qlist -IC 'virtual/perl-*')
>> * Afterwards re-run perl-cleaner
>> *
>> * Note that upgrading Perl with emerge option
>> --ignore-built-slot-operator-deps=y is not supported.
>>
>> Currently trying the above suggestions but I have no perl in my
>world.
>>
--
Sent from my Android device with K-9 Mail. Please excuse my brevity.
