rocwhite168 wrote:
Kaddeh<kaddeh<at> gmail.com> writes:
it would help to also put your /etc/fstaband let us know what FS you have root
setup asin addition to your /boot/grub/grub.conf
2010/6/20 rocwhite168<rocwhite168<at> 163.com>
I used genkernel to configure the kernel. It complained every time at shutdown
that
"Code: Bad EIP value.
...
do_IRQ: 0.43 No irq handler for vector (irq -1)".
I had to press the power button to shut down the machine. How should I solve
this problem?
On the other hand, I'm trying to configure the kernel manually. I did this
according to several online tutorials, but it still won't even start up: "Root
filesystem could not be mounted read/write." Can anyone please have a look at my
configuration? Thank you very much!
Roc
fstab
--------------------------------------
/dev/sda1 /boot ext4 noauto,noatime 1 2
/dev/sda5 / ext4 noatime 0 1
/dev/sda3 /usr ext4 noatime 0 2
/dev/sda4 /home ext4 noatime 0 2
/dev/sda7 /tmp ext4 noatime 0 0
/dev/sda6 none swap sw 0 0
shm /dev/shm tmpfs nodev,nosuid,noexec
0 0
grub.conf
--------------------------------------
default 0
timeout 3
#splashimage=(hd0,0)/boot/grub/splash.xpm.gz
title Gentoo Linux 2.6.31-r10
root (hd0,0)
kernel /boot/kernel-2.6.31-gentoo-r10 root=/dev/sda5
title Gentoo Linux 2.6.31-r10 -- genkernel
root (hd0,0)
kernel /boot/kernel-genkernel-x86-2.6.31-gentoo-r10 root=/dev/ram0 init=/linuxrc
ramdisk=8192 real_root=/dev/sda5
initrd /boot/initramfs-genkernel-x86-2.6.31-gentoo-r10
The first entry is for the manual configuration, while the second one is for the
kernel generated by genkernel.
Thanks,
Roc
I notice you are using ext4 for the root partition file system. Do you
have support for ext4 compiled in the kernel? Not as a module but built
into the kernel? Using modules is OK but things that it has to have to
get to the point where it can read the root partition and start loading
modules has to be built in, unless you want to go to the additional
effort to use a initrd.
Dale
:-) :-)
