Christian Herzyk wrote: > Hello all, > > I cannot write CDs anymore. > The only thing i changed lately was an upgrade to cdrtools-2.01-r3 from r2 > some days ago. Now nearly all attempts to burn an audio CD end with an error. > After some of the mistakes (using k3b) I searched the forum and found some > postings on problems writing CDs as normal user. > So I tried the ck-sources (2.6.11_p10) as these were said to have a patch, no > change. The last thing I tried was using cdrecord as root (both with the > ck-sources and the gentoo-sources-2.6.11), but I still get errors like the > following: > > Track 01: Total bytes read/written: 45236016/45236016 (19233 sectors). > Track 02: Total bytes read/written: 57692208/57692208 (24529 sectors). > cdrecord: Success. write_g1: scsi sendcmd: no error > CDB: 2A 00 00 00 DD CF 00 00 1B 00 > status: 0x2 (CHECK CONDITION) > Sense Bytes: 70 00 03 00 00 00 00 10 20 31 00 80 02 00 00 00 > Sense Key: 0x3 Medium Error, Segment 0 > Sense Code: 0x02 Qual 0x00 (no seek complete) Fru 0x0 > Sense flags: Blk 0 (not valid) > resid: 63504 > cmd finished after 5.457s timeout 40s > write track data: error after 29910384 bytes > cdrecord: A write error occured. > cdrecord: Please properly read the error message above. > cdrecord: Success. close track/session: scsi sendcmd: no error > CDB: 5B 00 02 00 00 00 00 00 00 00 > status: 0x2 (CHECK CONDITION) > Sense Bytes: 70 00 03 00 00 00 00 10 20 3B 00 80 02 00 00 00 > Sense Key: 0x3 Medium Error, Segment 0 > Sense Code: 0x02 Qual 0x00 (no seek complete) Fru 0x0 > Sense flags: Blk 0 (not valid) > cmd finished after 4.906s timeout 480s > cmd finished after 4.906s timeout 480s > cdrecord: Cannot fixate disk. > > I even tried different media types, all of them were used before without any > problems (I think I lost only 2 CD-Rs in over 2 years) so I would say it is > not any bad media. > What makes me wonder is that once I could finish writing a CD-R and once with > an CD-RW (using k3b as user) the other ~8 tries were failures. > > Any hints what could be the problems? > > Thanks a lot > > Christian
Have you reverted back to cdrtools-2.01-r2? I'm currently using cdrtools-2.01.01_alpha01-r2 with no problems. Zac -- [email protected] mailing list
