Julien Cayzac wrote: > On 4/28/05, Daniel Röder <[EMAIL PROTECTED]> wrote: > >>I try to get my external USB2.0 HDD working with my Gentoo-System with >>Kernel 2.6.11-r6. > > > Mine works out of the box on a 2.6.10-r6 system. > $ dmesg > ... > usb 1-1: new high speed USB device using ehci_hcd and address 3 > scsi2 : SCSI emulation for USB Mass Storage devices > usb-storage: device found at 3 > usb-storage: waiting for device to settle before scanning > Vendor: TUSB6250 Model: USB20 DISK DRIVE Rev: > Type: Direct-Access ANSI SCSI revision: 00 > SCSI device sda: 39070080 512-byte hdwr sectors (20004 MB) > sda: assuming drive cache: write through > SCSI device sda: 39070080 512-byte hdwr sectors (20004 MB) > sda: assuming drive cache: write through > /dev/scsi/host2/bus0/target0/lun0: p1 p2 p3 > Attached scsi disk sda at scsi2, channel 0, id 0, lun 0 > Attached scsi generic sg0 at scsi2, channel 0, id 0, lun 0, type 0 > usb-storage: device scan complete > > and it shows up as /dev/sda. > > Must be your kernel config. > > Julien. >
I figured it out, its the ehci-hcd driver, it seems my drive doesn´t like it. If I only enable uhci-hcd it works fine. Maybe its also the PCI-USB2.0-Card which causes the problem, who knows??? What I test now is, if the speed is OK. Daniel Röder -- gentoo-user@gentoo.org mailing list
