commit: 6fe17e177a8b6146cb6307dd1325b6a474e7991b Author: Waldo Lemmer <waldolemmer1 <AT> gmail <DOT> com> AuthorDate: Wed May 8 19:21:22 2024 +0000 Commit: Mike Gilbert <floppym <AT> gentoo <DOT> org> CommitDate: Sun May 19 15:28:37 2024 +0000 URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=6fe17e17
app-editors/vim-core: remove textwidth autocommands vimrc registered an autocommand that set textwidth=78 for all *.txt buffers. This has sparked a few discussions, including this [1] forum post and bug 559800. Overriding the upstream default of textwidth=0 is not a good idea. This commit removes the relevant autocommand and revbumps all versions of the package. [1]: https://forums.gentoo.org/viewtopic-p-8450986.html Closes: https://bugs.gentoo.org/559800 Signed-off-by: Waldo Lemmer <waldolemmer1 <AT> gmail.com> Signed-off-by: Mike Gilbert <floppym <AT> gentoo.org> app-editors/vim-core/files/vimrc-r7 | 210 +++++++++++++++++++++ ...ore-9999.ebuild => vim-core-9.0.1503-r1.ebuild} | 9 +- ...ore-9999.ebuild => vim-core-9.0.1627-r1.ebuild} | 9 +- ...ore-9999.ebuild => vim-core-9.0.1678-r1.ebuild} | 11 +- ...ore-9999.ebuild => vim-core-9.0.1777-r1.ebuild} | 11 +- ...ore-9999.ebuild => vim-core-9.0.2092-r1.ebuild} | 17 +- ...ore-9999.ebuild => vim-core-9.0.2167-r1.ebuild} | 12 +- ...ore-9999.ebuild => vim-core-9.1.0366-r1.ebuild} | 14 +- app-editors/vim-core/vim-core-9999.ebuild | 2 +- 9 files changed, 240 insertions(+), 55 deletions(-) diff --git a/app-editors/vim-core/files/vimrc-r7 b/app-editors/vim-core/files/vimrc-r7 new file mode 100644 index 000000000000..39a30d6f2955 --- /dev/null +++ b/app-editors/vim-core/files/vimrc-r7 @@ -0,0 +1,210 @@ +scriptencoding utf-8 +" ^^ Please leave the above line at the start of the file. + +" Default configuration file for Vim + +" Written by Aron Griffis <[email protected]> +" Modified by Ryan Phillips <[email protected]> +" Modified some more by Ciaran McCreesh <[email protected]> +" Added Redhat's vimrc info by Seemant Kulleen <[email protected]> + +" You can override any of these settings on a global basis via the +" "/etc/vim/vimrc.local" file, and on a per-user basis via "~/.vimrc". You may +" need to create these. + +" {{{ General settings +" The following are some sensible defaults for Vim for most users. +" We attempt to change as little as possible from Vim's defaults, +" deviating only where it makes sense +set nocompatible " Use Vim defaults (much better!) +set bs=2 " Allow backspacing over everything in insert mode +set ai " Always set auto-indenting on +set history=50 " keep 50 lines of command history +set ruler " Show the cursor position all the time + +set viminfo='20,\"500 " Keep a .viminfo file. + +" Don't use Ex mode, use Q for formatting +map Q gq + +" When doing tab completion, give the following files lower priority. You may +" wish to set 'wildignore' to completely ignore files, and 'wildmenu' to enable +" enhanced tab completion. These can be done in the user vimrc file. +set suffixes+=.info,.aux,.log,.dvi,.bbl,.out,.o,.lo + +" When displaying line numbers, don't use an annoyingly wide number column. This +" doesn't enable line numbers -- :set number will do that. The value given is a +" minimum width to use for the number column, not a fixed size. +if v:version >= 700 + set numberwidth=3 +endif +" }}} + +" {{{ Modeline settings +" We don't allow modelines by default. See bug #14088 and bug #73715. +" If you're not concerned about these, you can enable them on a per-user +" basis by adding "set modeline" to your ~/.vimrc file. +set nomodeline +" }}} + +" {{{ Locale settings +" Try to come up with some nice sane GUI fonts. Also try to set a sensible +" value for fileencodings based upon locale. These can all be overridden in +" the user vimrc file. +if v:lang =~? "^ko" + set fileencodings=euc-kr + set guifontset=-*-*-medium-r-normal--16-*-*-*-*-*-*-* +elseif v:lang =~? "^ja_JP" + set fileencodings=euc-jp + set guifontset=-misc-fixed-medium-r-normal--14-*-*-*-*-*-*-* +elseif v:lang =~? "^zh_TW" + set fileencodings=big5 + set guifontset=-sony-fixed-medium-r-normal--16-150-75-75-c-80-iso8859-1,-taipei-fixed-medium-r-normal--16-150-75-75-c-160-big5-0 +elseif v:lang =~? "^zh_CN" + set fileencodings=gb2312 + set guifontset=*-r-* +endif + +" If we have a BOM, always honour that rather than trying to guess. +if &fileencodings !~? "ucs-bom" + set fileencodings^=ucs-bom +endif + +" Always check for UTF-8 when trying to determine encodings. +if &fileencodings !~? "utf-8" + " If we have to add this, the default encoding is not Unicode. + " We use this fact later to revert to the default encoding in plaintext/empty + " files. + let g:added_fenc_utf8 = 1 + set fileencodings+=utf-8 +endif + +" Make sure we have a sane fallback for encoding detection +if &fileencodings !~? "default" + set fileencodings+=default +endif +" }}} + +" {{{ Syntax highlighting settings +" Switch syntax highlighting on, when the terminal has colors +" Also switch on highlighting the last used search pattern. +if &t_Co > 2 || has("gui_running") + syntax on + set hlsearch +endif +" }}} + +" {{{ Terminal fixes +if &term ==? "xterm" + set t_Sb=^[4%dm + set t_Sf=^[3%dm + set ttymouse=xterm2 +endif + +if &term ==? "gnome" && has("eval") + " Set useful keys that vim doesn't discover via termcap but are in the + " builtin xterm termcap. See bug #122562. We use exec to avoid having to + " include raw escapes in the file. + exec "set <C-Left>=\eO5D" + exec "set <C-Right>=\eO5C" +endif +" }}} + +" {{{ Filetype plugin settings +" Enable plugin-provided filetype settings, but only if the ftplugin +" directory exists (which it won't on livecds, for example). +if isdirectory(expand("$VIMRUNTIME/ftplugin")) + filetype plugin on + + " Uncomment the next line (or copy to your ~/.vimrc) for plugin-provided + " indent settings. Some people don't like these, so we won't turn them on by + " default. + " filetype indent on +endif +" }}} + +" {{{ Fix &shell, see bug #101665. +if "" == &shell + if executable("@GENTOO_PORTAGE_EPREFIX@/bin/bash") + set shell=@GENTOO_PORTAGE_EPREFIX@/bin/bash + elseif executable("@GENTOO_PORTAGE_EPREFIX@/bin/sh") + set shell=@GENTOO_PORTAGE_EPREFIX@/bin/sh + endif +endif +"}}} + +" {{{ Our default /bin/sh is bash, not ksh, so syntax highlighting for .sh +" files should default to bash. See :help sh-syntax and bug #101819. +if has("eval") + let is_bash=1 +endif +" }}} + +" {{{ Autocommands +if has("autocmd") + +augroup gentoo + au! + + " Gentoo-specific settings for ebuilds. These are the federally-mandated + " required tab settings. See the following for more information: + " http://www.gentoo.org/proj/en/devrel/handbook/handbook.xml + " Note that the rules below are very minimal and don't cover everything. + " Better to emerge app-vim/gentoo-syntax, which provides full syntax, + " filetype and indent settings for all things Gentoo. + au BufRead,BufNewFile *.e{build,class} let is_bash=1|setfiletype sh + au BufRead,BufNewFile *.e{build,class} set ts=4 sw=4 noexpandtab + + " When editing a file, always jump to the last cursor position + autocmd BufReadPost * + \ if ! exists("g:leave_my_cursor_position_alone") | + \ if line("'\"") > 0 && line ("'\"") <= line("$") | + \ exe "normal! g'\"" | + \ endif | + \ endif + + " When editing a crontab file, set backupcopy to yes rather than auto. See + " :help crontab and bug #53437. + autocmd FileType crontab set backupcopy=yes + + " If we previously detected that the default encoding is not UTF-8 + " (g:added_fenc_utf8), assume that a file with only ASCII characters (or no + " characters at all) isn't a Unicode file, but is in the default encoding. + " Except of course if a byte-order mark is in effect. + autocmd BufReadPost * + \ if exists("g:added_fenc_utf8") && &fileencoding == "utf-8" && + \ ! &bomb && search('[\x80-\xFF]','nw') == 0 && &modifiable | + \ set fileencoding= | + \ endif + +augroup END + +endif " has("autocmd") +" }}} + +" We don't want VIM to load their own built-in defaults, preferring ours here +" instead. This option cannot apply to minimal builds, so it is guarded by a +" test that's guaranteed to fail for those, owing to the lack of +eval. +if 1 + let g:skip_defaults_vim = 1 +endif + +" Enable Omni completion when opening a file only if a specific plugin does +" not already exist for that filetype. This allows Omni completion +" (Ctrl-x/Ctrl-o) to work with any programming language if and only if a syntax +" file exists for the said language. +if exists("+omnifunc") + autocmd Filetype * + \ if &omnifunc == "" | + \ setlocal omnifunc=syntaxcomplete#Complete | + \ endif +endif + +" {{{ vimrc.local +if filereadable("@GENTOO_PORTAGE_EPREFIX@/etc/vim/vimrc.local") + source @GENTOO_PORTAGE_EPREFIX@/etc/vim/vimrc.local +endif +" }}} + +" vim: set fenc=utf-8 tw=80 sw=2 sts=2 et foldmethod=marker : + diff --git a/app-editors/vim-core/vim-core-9999.ebuild b/app-editors/vim-core/vim-core-9.0.1503-r1.ebuild similarity index 97% copy from app-editors/vim-core/vim-core-9999.ebuild copy to app-editors/vim-core/vim-core-9.0.1503-r1.ebuild index acfd3ab4aab3..bd8cbec4adfb 100644 --- a/app-editors/vim-core/vim-core-9999.ebuild +++ b/app-editors/vim-core/vim-core-9.0.1503-r1.ebuild @@ -16,7 +16,7 @@ if [[ ${PV} == 9999* ]] ; then else SRC_URI="https://github.com/vim/vim/archive/v${PV}.tar.gz -> vim-${PV}.tar.gz https://gitweb.gentoo.org/proj/vim-patches.git/snapshot/vim-patches-vim-${VIM_PATCHES_VERSION}-patches.tar.bz2"; - KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~loong ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sparc ~x86 ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~x64-solaris" + KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~loong ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sparc ~x86 ~amd64-linux ~x86-linux ~arm64-macos ~ppc-macos ~x64-macos ~x64-solaris" fi S="${WORKDIR}/vim-${PV}" @@ -108,11 +108,6 @@ src_prepare() { # Remove src/auto/configure file. rm -v src/auto/configure || die "rm configure failed" - - # bug 908961 - if use elibc_musl ; then - sed -i -e '/ja.sjis/d' src/po/Make_all.mak || die - fi } src_configure() { @@ -190,7 +185,7 @@ src_install() { # default vimrc is installed by vim-core since it applies to # both vim and gvim insinto /etc/vim/ - newins "${FILESDIR}"/vimrc-r6 vimrc + newins "${FILESDIR}"/vimrc-r7 vimrc eprefixify "${ED}"/etc/vim/vimrc if use minimal; then diff --git a/app-editors/vim-core/vim-core-9999.ebuild b/app-editors/vim-core/vim-core-9.0.1627-r1.ebuild similarity index 97% copy from app-editors/vim-core/vim-core-9999.ebuild copy to app-editors/vim-core/vim-core-9.0.1627-r1.ebuild index acfd3ab4aab3..bd8cbec4adfb 100644 --- a/app-editors/vim-core/vim-core-9999.ebuild +++ b/app-editors/vim-core/vim-core-9.0.1627-r1.ebuild @@ -16,7 +16,7 @@ if [[ ${PV} == 9999* ]] ; then else SRC_URI="https://github.com/vim/vim/archive/v${PV}.tar.gz -> vim-${PV}.tar.gz https://gitweb.gentoo.org/proj/vim-patches.git/snapshot/vim-patches-vim-${VIM_PATCHES_VERSION}-patches.tar.bz2"; - KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~loong ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sparc ~x86 ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~x64-solaris" + KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~loong ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sparc ~x86 ~amd64-linux ~x86-linux ~arm64-macos ~ppc-macos ~x64-macos ~x64-solaris" fi S="${WORKDIR}/vim-${PV}" @@ -108,11 +108,6 @@ src_prepare() { # Remove src/auto/configure file. rm -v src/auto/configure || die "rm configure failed" - - # bug 908961 - if use elibc_musl ; then - sed -i -e '/ja.sjis/d' src/po/Make_all.mak || die - fi } src_configure() { @@ -190,7 +185,7 @@ src_install() { # default vimrc is installed by vim-core since it applies to # both vim and gvim insinto /etc/vim/ - newins "${FILESDIR}"/vimrc-r6 vimrc + newins "${FILESDIR}"/vimrc-r7 vimrc eprefixify "${ED}"/etc/vim/vimrc if use minimal; then diff --git a/app-editors/vim-core/vim-core-9999.ebuild b/app-editors/vim-core/vim-core-9.0.1678-r1.ebuild similarity index 96% copy from app-editors/vim-core/vim-core-9999.ebuild copy to app-editors/vim-core/vim-core-9.0.1678-r1.ebuild index acfd3ab4aab3..95e078489036 100644 --- a/app-editors/vim-core/vim-core-9999.ebuild +++ b/app-editors/vim-core/vim-core-9.0.1678-r1.ebuild @@ -16,7 +16,7 @@ if [[ ${PV} == 9999* ]] ; then else SRC_URI="https://github.com/vim/vim/archive/v${PV}.tar.gz -> vim-${PV}.tar.gz https://gitweb.gentoo.org/proj/vim-patches.git/snapshot/vim-patches-vim-${VIM_PATCHES_VERSION}-patches.tar.bz2"; - KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~loong ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sparc ~x86 ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~x64-solaris" + KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~loong ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sparc ~x86 ~amd64-linux ~x86-linux ~arm64-macos ~ppc-macos ~x64-macos ~x64-solaris" fi S="${WORKDIR}/vim-${PV}" @@ -108,11 +108,6 @@ src_prepare() { # Remove src/auto/configure file. rm -v src/auto/configure || die "rm configure failed" - - # bug 908961 - if use elibc_musl ; then - sed -i -e '/ja.sjis/d' src/po/Make_all.mak || die - fi } src_configure() { @@ -134,7 +129,7 @@ src_configure() { export ac_cv_prog_STRIP="$(type -P true ) faking strip" local myconf=( - --with-modified-by=Gentoo-${PVR} + --with-modified-by="Gentoo-${PVR} (RIP Bram)" --enable-gui=no --without-x --disable-darwin @@ -190,7 +185,7 @@ src_install() { # default vimrc is installed by vim-core since it applies to # both vim and gvim insinto /etc/vim/ - newins "${FILESDIR}"/vimrc-r6 vimrc + newins "${FILESDIR}"/vimrc-r7 vimrc eprefixify "${ED}"/etc/vim/vimrc if use minimal; then diff --git a/app-editors/vim-core/vim-core-9999.ebuild b/app-editors/vim-core/vim-core-9.0.1777-r1.ebuild similarity index 96% copy from app-editors/vim-core/vim-core-9999.ebuild copy to app-editors/vim-core/vim-core-9.0.1777-r1.ebuild index acfd3ab4aab3..95e078489036 100644 --- a/app-editors/vim-core/vim-core-9999.ebuild +++ b/app-editors/vim-core/vim-core-9.0.1777-r1.ebuild @@ -16,7 +16,7 @@ if [[ ${PV} == 9999* ]] ; then else SRC_URI="https://github.com/vim/vim/archive/v${PV}.tar.gz -> vim-${PV}.tar.gz https://gitweb.gentoo.org/proj/vim-patches.git/snapshot/vim-patches-vim-${VIM_PATCHES_VERSION}-patches.tar.bz2"; - KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~loong ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sparc ~x86 ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~x64-solaris" + KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~loong ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sparc ~x86 ~amd64-linux ~x86-linux ~arm64-macos ~ppc-macos ~x64-macos ~x64-solaris" fi S="${WORKDIR}/vim-${PV}" @@ -108,11 +108,6 @@ src_prepare() { # Remove src/auto/configure file. rm -v src/auto/configure || die "rm configure failed" - - # bug 908961 - if use elibc_musl ; then - sed -i -e '/ja.sjis/d' src/po/Make_all.mak || die - fi } src_configure() { @@ -134,7 +129,7 @@ src_configure() { export ac_cv_prog_STRIP="$(type -P true ) faking strip" local myconf=( - --with-modified-by=Gentoo-${PVR} + --with-modified-by="Gentoo-${PVR} (RIP Bram)" --enable-gui=no --without-x --disable-darwin @@ -190,7 +185,7 @@ src_install() { # default vimrc is installed by vim-core since it applies to # both vim and gvim insinto /etc/vim/ - newins "${FILESDIR}"/vimrc-r6 vimrc + newins "${FILESDIR}"/vimrc-r7 vimrc eprefixify "${ED}"/etc/vim/vimrc if use minimal; then diff --git a/app-editors/vim-core/vim-core-9999.ebuild b/app-editors/vim-core/vim-core-9.0.2092-r1.ebuild similarity index 93% copy from app-editors/vim-core/vim-core-9999.ebuild copy to app-editors/vim-core/vim-core-9.0.2092-r1.ebuild index acfd3ab4aab3..c2cd0f76de54 100644 --- a/app-editors/vim-core/vim-core-9999.ebuild +++ b/app-editors/vim-core/vim-core-9.0.2092-r1.ebuild @@ -6,7 +6,7 @@ EAPI=8 # Please bump with app-editors/vim and app-editors/gvim VIM_VERSION="9.0" -VIM_PATCHES_VERSION="9.0.1000" +VIM_PATCHES_VERSION="9.0.2092" inherit bash-completion-r1 desktop flag-o-matic prefix toolchain-funcs vim-doc xdg-utils if [[ ${PV} == 9999* ]] ; then @@ -15,8 +15,8 @@ if [[ ${PV} == 9999* ]] ; then EGIT_CHECKOUT_DIR=${WORKDIR}/vim-${PV} else SRC_URI="https://github.com/vim/vim/archive/v${PV}.tar.gz -> vim-${PV}.tar.gz - https://gitweb.gentoo.org/proj/vim-patches.git/snapshot/vim-patches-vim-${VIM_PATCHES_VERSION}-patches.tar.bz2"; - KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~loong ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sparc ~x86 ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~x64-solaris" + https://git.sr.ht/~xxc3nsoredxx/vim-patches/refs/download/vim-${VIM_PATCHES_VERSION}-patches/vim-${VIM_PATCHES_VERSION}-patches.tar.xz"; + KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~loong ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sparc ~x86 ~amd64-linux ~x86-linux ~arm64-macos ~ppc-macos ~x64-macos ~x64-solaris" fi S="${WORKDIR}/vim-${PV}" @@ -34,7 +34,7 @@ BDEPEND="dev-build/autoconf" if [[ ${PV} != 9999* ]]; then # Gentoo patches to fix runtime issues, cross-compile errors, etc PATCHES=( - "${WORKDIR}/vim-patches-vim-${VIM_PATCHES_VERSION}-patches" + "${WORKDIR}/vim-${VIM_PATCHES_VERSION}-patches" ) fi @@ -108,11 +108,6 @@ src_prepare() { # Remove src/auto/configure file. rm -v src/auto/configure || die "rm configure failed" - - # bug 908961 - if use elibc_musl ; then - sed -i -e '/ja.sjis/d' src/po/Make_all.mak || die - fi } src_configure() { @@ -134,7 +129,7 @@ src_configure() { export ac_cv_prog_STRIP="$(type -P true ) faking strip" local myconf=( - --with-modified-by=Gentoo-${PVR} + --with-modified-by="Gentoo-${PVR} (RIP Bram)" --enable-gui=no --without-x --disable-darwin @@ -190,7 +185,7 @@ src_install() { # default vimrc is installed by vim-core since it applies to # both vim and gvim insinto /etc/vim/ - newins "${FILESDIR}"/vimrc-r6 vimrc + newins "${FILESDIR}"/vimrc-r7 vimrc eprefixify "${ED}"/etc/vim/vimrc if use minimal; then diff --git a/app-editors/vim-core/vim-core-9999.ebuild b/app-editors/vim-core/vim-core-9.0.2167-r1.ebuild similarity index 94% copy from app-editors/vim-core/vim-core-9999.ebuild copy to app-editors/vim-core/vim-core-9.0.2167-r1.ebuild index acfd3ab4aab3..bd23f78d0c6a 100644 --- a/app-editors/vim-core/vim-core-9999.ebuild +++ b/app-editors/vim-core/vim-core-9.0.2167-r1.ebuild @@ -6,7 +6,7 @@ EAPI=8 # Please bump with app-editors/vim and app-editors/gvim VIM_VERSION="9.0" -VIM_PATCHES_VERSION="9.0.1000" +VIM_PATCHES_VERSION="9.0.2092" inherit bash-completion-r1 desktop flag-o-matic prefix toolchain-funcs vim-doc xdg-utils if [[ ${PV} == 9999* ]] ; then @@ -15,8 +15,8 @@ if [[ ${PV} == 9999* ]] ; then EGIT_CHECKOUT_DIR=${WORKDIR}/vim-${PV} else SRC_URI="https://github.com/vim/vim/archive/v${PV}.tar.gz -> vim-${PV}.tar.gz - https://gitweb.gentoo.org/proj/vim-patches.git/snapshot/vim-patches-vim-${VIM_PATCHES_VERSION}-patches.tar.bz2"; - KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~loong ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sparc ~x86 ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~x64-solaris" + https://git.sr.ht/~xxc3nsoredxx/vim-patches/refs/download/vim-${VIM_PATCHES_VERSION}-patches/vim-${VIM_PATCHES_VERSION}-patches.tar.xz"; + KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~loong ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sparc ~x86 ~amd64-linux ~x86-linux ~arm64-macos ~ppc-macos ~x64-macos ~x64-solaris" fi S="${WORKDIR}/vim-${PV}" @@ -34,7 +34,7 @@ BDEPEND="dev-build/autoconf" if [[ ${PV} != 9999* ]]; then # Gentoo patches to fix runtime issues, cross-compile errors, etc PATCHES=( - "${WORKDIR}/vim-patches-vim-${VIM_PATCHES_VERSION}-patches" + "${WORKDIR}/vim-${VIM_PATCHES_VERSION}-patches" ) fi @@ -134,7 +134,7 @@ src_configure() { export ac_cv_prog_STRIP="$(type -P true ) faking strip" local myconf=( - --with-modified-by=Gentoo-${PVR} + --with-modified-by="Gentoo-${PVR} (RIP Bram)" --enable-gui=no --without-x --disable-darwin @@ -190,7 +190,7 @@ src_install() { # default vimrc is installed by vim-core since it applies to # both vim and gvim insinto /etc/vim/ - newins "${FILESDIR}"/vimrc-r6 vimrc + newins "${FILESDIR}"/vimrc-r7 vimrc eprefixify "${ED}"/etc/vim/vimrc if use minimal; then diff --git a/app-editors/vim-core/vim-core-9999.ebuild b/app-editors/vim-core/vim-core-9.1.0366-r1.ebuild similarity index 94% copy from app-editors/vim-core/vim-core-9999.ebuild copy to app-editors/vim-core/vim-core-9.1.0366-r1.ebuild index acfd3ab4aab3..759cb04d314d 100644 --- a/app-editors/vim-core/vim-core-9999.ebuild +++ b/app-editors/vim-core/vim-core-9.1.0366-r1.ebuild @@ -5,8 +5,8 @@ EAPI=8 # Please bump with app-editors/vim and app-editors/gvim -VIM_VERSION="9.0" -VIM_PATCHES_VERSION="9.0.1000" +VIM_VERSION="9.1" +VIM_PATCHES_VERSION="9.0.2092" inherit bash-completion-r1 desktop flag-o-matic prefix toolchain-funcs vim-doc xdg-utils if [[ ${PV} == 9999* ]] ; then @@ -15,8 +15,8 @@ if [[ ${PV} == 9999* ]] ; then EGIT_CHECKOUT_DIR=${WORKDIR}/vim-${PV} else SRC_URI="https://github.com/vim/vim/archive/v${PV}.tar.gz -> vim-${PV}.tar.gz - https://gitweb.gentoo.org/proj/vim-patches.git/snapshot/vim-patches-vim-${VIM_PATCHES_VERSION}-patches.tar.bz2"; - KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~loong ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sparc ~x86 ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~x64-solaris" + https://git.sr.ht/~xxc3nsoredxx/vim-patches/refs/download/vim-${VIM_PATCHES_VERSION}-patches/vim-${VIM_PATCHES_VERSION}-patches.tar.xz"; + KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~loong ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sparc ~x86 ~amd64-linux ~x86-linux ~arm64-macos ~ppc-macos ~x64-macos ~x64-solaris" fi S="${WORKDIR}/vim-${PV}" @@ -34,7 +34,7 @@ BDEPEND="dev-build/autoconf" if [[ ${PV} != 9999* ]]; then # Gentoo patches to fix runtime issues, cross-compile errors, etc PATCHES=( - "${WORKDIR}/vim-patches-vim-${VIM_PATCHES_VERSION}-patches" + "${WORKDIR}/vim-${VIM_PATCHES_VERSION}-patches" ) fi @@ -134,7 +134,7 @@ src_configure() { export ac_cv_prog_STRIP="$(type -P true ) faking strip" local myconf=( - --with-modified-by=Gentoo-${PVR} + --with-modified-by="Gentoo-${PVR} (RIP Bram)" --enable-gui=no --without-x --disable-darwin @@ -190,7 +190,7 @@ src_install() { # default vimrc is installed by vim-core since it applies to # both vim and gvim insinto /etc/vim/ - newins "${FILESDIR}"/vimrc-r6 vimrc + newins "${FILESDIR}"/vimrc-r7 vimrc eprefixify "${ED}"/etc/vim/vimrc if use minimal; then diff --git a/app-editors/vim-core/vim-core-9999.ebuild b/app-editors/vim-core/vim-core-9999.ebuild index acfd3ab4aab3..b78c0ae44f87 100644 --- a/app-editors/vim-core/vim-core-9999.ebuild +++ b/app-editors/vim-core/vim-core-9999.ebuild @@ -190,7 +190,7 @@ src_install() { # default vimrc is installed by vim-core since it applies to # both vim and gvim insinto /etc/vim/ - newins "${FILESDIR}"/vimrc-r6 vimrc + newins "${FILESDIR}"/vimrc-r7 vimrc eprefixify "${ED}"/etc/vim/vimrc if use minimal; then
