commit: a69a6f22169f6190713f6202f3a068d88fbaeebd Author: Marco Scardovi <mscardovi <AT> icloud <DOT> com> AuthorDate: Wed Dec 28 00:34:05 2022 +0000 Commit: Sam James <sam <AT> gentoo <DOT> org> CommitDate: Wed Dec 28 21:00:55 2022 +0000 URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=a69a6f22
sys-cluster/torque: revbump, fix .la error Closes: https://bugs.gentoo.org/852089 Signed-off-by: Marco Scardovi <mscardovi <AT> icloud.com> Closes: https://github.com/gentoo/gentoo/pull/28868 Signed-off-by: Sam James <sam <AT> gentoo.org> sys-cluster/torque/torque-6.0.4-r3.ebuild | 200 ++++++++++++++++++++++++++++++ 1 file changed, 200 insertions(+) diff --git a/sys-cluster/torque/torque-6.0.4-r3.ebuild b/sys-cluster/torque/torque-6.0.4-r3.ebuild new file mode 100644 index 000000000000..6799806e325e --- /dev/null +++ b/sys-cluster/torque/torque-6.0.4-r3.ebuild @@ -0,0 +1,200 @@ +# Copyright 1999-2022 Gentoo Authors +# Distributed under the terms of the GNU General Public License v2 + +EAPI=8 + +MY_COMMIT="6a0b37f85c7d644e9217cbab1542792d646f59a6" +inherit autotools flag-o-matic linux-info toolchain-funcs + +DESCRIPTION="Resource manager and queuing system based on OpenPBS" +HOMEPAGE="http://www.adaptivecomputing.com/products/open-source/torque"; +SRC_URI=" + https://github.com/adaptivecomputing/torque/archive/${MY_COMMIT}.tar.gz -> ${P}-gh-20170829.tar.gz + https://dev.gentoo.org/~juippis/distfiles/tmp/torque-6.0.4-gcc7.patch + https://dev.gentoo.org/~sam/distfiles/${CATEGORY}/${PN}/${P}-glibc-2.34-pthread.patch.bz2 +" + +LICENSE="torque-2.5" +SLOT="0" +KEYWORDS="~alpha ~amd64 ~arm64 ~hppa ~ia64 ~mips ~ppc ~ppc64 ~riscv ~sparc ~x86" +IUSE="autorun cgroups cpusets +crypt doc munge nvidia quickcommit server +syslog tk" + +DEPEND_COMMON=" + sys-libs/zlib + sys-libs/readline:0= + dev-libs/libxml2 + dev-libs/boost + cpusets? ( sys-apps/hwloc:= ) + munge? ( sys-auth/munge ) + nvidia? ( >=x11-drivers/nvidia-drivers-275 ) + tk? ( + dev-lang/tk:0= + dev-lang/tcl:0= + ) + syslog? ( virtual/logger ) + !!games-util/qstat +" + +# libncurses.so is only needed for configure check on readline +DEPEND=" + ${DEPEND_COMMON} + sys-libs/ncurses:* + !!sys-cluster/slurm +" + +RDEPEND=" + ${DEPEND_COMMON} + crypt? ( net-misc/openssh ) + !crypt? ( net-misc/netkit-rsh ) + !dev-libs/uthash +" + +# Torque should depend on dev-libs/uthash but that's pretty much impossible +# to patch in as they ship with a broken configure such that files referenced +# by the configure.ac and Makefile.am are missing. +# http://www.supercluster.org/pipermail/torquedev/2014-October/004773.html + +S="${WORKDIR}"/${PN}-6a0b37f85c7d644e9217cbab1542792d646f59a6 + +PATCHES=( + "${DISTDIR}"/${P}-gcc7.patch + "${FILESDIR}"/${PN}-6.0.3-fix-emptystring-comparison.patch + "${FILESDIR}"/${P}-no-openssl.patch + "${FILESDIR}"/${P}-error_buf_overflow_prevent.patch + "${WORKDIR}"/${P}-glibc-2.34-pthread.patch + "${FILESDIR}"/${P}-pthreads-deux.patch +) + +pkg_setup() { + PBS_SERVER_HOME="${PBS_SERVER_HOME:-/var/spool/${PN}}" + + # Find a Torque server to use. Check environment, then + # current setup (if any), and fall back on current hostname. + if [[ -z "${PBS_SERVER_NAME}" ]]; then + if [ -f "${EROOT}/${PBS_SERVER_HOME}/server_name" ]; then + PBS_SERVER_NAME="$(<${EROOT}/${PBS_SERVER_HOME}/server_name)" + else + PBS_SERVER_NAME=$(hostname -f) + fi + fi + + if use cpusets || use cgroups; then + if ! use kernel_linux; then + einfo + elog " Torque currently only has support for cpusets and cgroups in linux." + elog "Assuming you didn't really want this USE flag and ignoring its state." + einfo + else + linux-info_pkg_setup + if ! linux_config_exists || ! linux_chkconfig_present CPUSETS; then + einfo + elog " Torque support for cpusets will require that you recompile" + elog "your kernel with CONFIG_CPUSETS enabled." + einfo + fi + fi + fi +} + +src_prepare() { + default + # We install to a valid location, no need to muck with ld.so.conf + # --without-loadlibfile is supposed to do this for us... + sed -i '/mk_default_ld_lib_file || return 1/d' buildutils/pbs_mkdirs.in || die + eautoreconf +} + +src_configure() { + append-cflags "-fpermissive" + + # Force Bash for configure as there's a lot of issues with configure.ac and such here + CONFIG_SHELL="${BROOT}/bin/bash" econf \ + $(use_enable tk gui) \ + $(use_enable tk tcl-qstat) \ + $(use_enable syslog) \ + $(use_enable server) \ + --disable-drmaa \ + $(use_enable munge munge-auth) \ + $(use_enable nvidia nvidia-gpus) \ + $(usex crypt "--with-rcp=scp" "--with-rcp=mom_rcp") \ + $(usex kernel_linux $(use_enable cpusets cpuset) --disable-cpuset) \ + $(usex kernel_linux $(use_enable cgroups) --disable-cgroups) \ + $(use_enable autorun) \ + $(use_enable quickcommit) \ + --with-server-home=${PBS_SERVER_HOME} \ + --with-environ=/etc/pbs_environment \ + --with-default-server=${PBS_SERVER_NAME} \ + --disable-gcc-warnings \ + --disable-silent-rules \ + --with-tcp-retry-limit=2 \ + --without-loadlibfile +} + +src_compile() { + # The .c files are C++, and $(CC) is misused. + emake CC="$(tc-getCXX)" +} + +src_install() { + local dir + + DOCS=( CHANGELOG README.* Release_Notes ) + use doc && DOCS+=( doc/admin_guide.ps doc/*.pdf ) + + default + + # The build script isn't alternative install location friendly, + # So we have to fix some hard-coded paths in tclIndex for xpbs* to work + for file in $(find "${ED}" -iname tclIndex); do + sed \ + -e "s/${ED//\// }/ /" \ + -i "${file}" || die + done + + for dir in $(find "${ED}/${PBS_SERVER_HOME}" -type d); do + keepdir "${dir#${ED}}" + done + + if use server; then + newinitd "${FILESDIR}"/pbs_server-init.d-munge pbs_server + newinitd "${FILESDIR}"/pbs_sched-init.d pbs_sched + fi + + newinitd "${FILESDIR}"/pbs_mom-init.d-munge pbs_mom + newconfd "${FILESDIR}"/${PN}-conf.d-munge ${PN} + newinitd "${FILESDIR}"/trqauthd-init.d trqauthd + newenvd "${FILESDIR}"/${PN}-env.d 25${PN} + + find "${ED}" -name '*.la' -delete || die +} + +pkg_preinst() { + if [[ -f "${EROOT}/etc/pbs_environment" ]]; then + cp "${EROOT}/etc/pbs_environment" "${ED}"/etc/pbs_environment || die + fi + + if use server && [[ -f "${EROOT}/${PBS_SERVER_HOME}/server_priv/nodes" ]]; then + cp \ + "${EROOT}/${PBS_SERVER_HOME}/server_priv/nodes" \ + "${ED}/${PBS_SERVER_HOME}/server_priv/nodes" || die + fi + + echo "${PBS_SERVER_NAME}" > "${ED}${PBS_SERVER_HOME}/server_name" || die + + # Fix up the env.d file to use our set server home. + sed \ + -e "s:/var/spool/${PN}:${PBS_SERVER_HOME}:g" \ + -i "${ED}"/etc/env.d/25${PN} || die + + if use munge; then + sed -i 's,\(PBS_USE_MUNGE=\).*,\11,' "${ED}"/etc/conf.d/${PN} || die + fi +} + +pkg_postinst() { + if [[ -z "${REPLACING_VERSIONS}" ]] ; then + elog "If this is the first time torque has been installed, then you are not" + elog "ready to start the server. Please refer to the documentation located at:" + elog "http://docs.adaptivecomputing.com/torque/${PV//./-}/adminGuide/torquehelp.htm#topics/torque/1-installConfig/initializeConfigOnServer.htm"; + fi +}
