commit: 08ab771b7280edd7adfc6ae3b2289bc0f4fc09b1
Author: Thomas Deutschmann <whissi <AT> gentoo <DOT> org>
AuthorDate: Thu Jun 17 20:08:15 2021 +0000
Commit: Thomas Deutschmann <whissi <AT> gentoo <DOT> org>
CommitDate: Thu Jun 17 20:32:00 2021 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=08ab771b
net-misc/openssh: Fix MissingUseDepDefault for dev-libs/openssl[bindist]
Package-Manager: Portage-3.0.20, Repoman-3.0.3
Signed-off-by: Thomas Deutschmann <whissi <AT> gentoo.org>
net-misc/openssh/files/sshd-r2.initd | 100 ++++++++++++++++++++++++++++++
net-misc/openssh/openssh-8.5_p1-r1.ebuild | 6 +-
net-misc/openssh/openssh-8.6_p1-r1.ebuild | 6 +-
3 files changed, 106 insertions(+), 6 deletions(-)
diff --git a/net-misc/openssh/files/sshd-r2.initd
b/net-misc/openssh/files/sshd-r2.initd
new file mode 100644
index 00000000000..3381fb965dd
--- /dev/null
+++ b/net-misc/openssh/files/sshd-r2.initd
@@ -0,0 +1,100 @@
+#!/sbin/openrc-run
+# Copyright 1999-2021 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+extra_commands="checkconfig"
+extra_started_commands="reload"
+
+: ${SSHD_CONFDIR:=${RC_PREFIX%/}/etc/ssh}
+: ${SSHD_CONFIG:=${SSHD_CONFDIR}/sshd_config}
+: ${SSHD_PIDFILE:=${RC_PREFIX%/}/run/${SVCNAME}.pid}
+: ${SSHD_BINARY:=${RC_PREFIX%/}/usr/sbin/sshd}
+: ${SSHD_KEYGEN_BINARY:=${RC_PREFIX%/}/usr/bin/ssh-keygen}
+
+command="${SSHD_BINARY}"
+pidfile="${SSHD_PIDFILE}"
+command_args="${SSHD_OPTS} -o PidFile=${pidfile} -f ${SSHD_CONFIG}"
+
+# Wait one second (length chosen arbitrarily) to see if sshd actually
+# creates a PID file, or if it crashes for some reason like not being
+# able to bind to the address in ListenAddress (bug 617596).
+: ${SSHD_SSD_OPTS:=--wait 1000}
+start_stop_daemon_args="${SSHD_SSD_OPTS}"
+
+depend() {
+ # Entropy can be used by ssh-keygen, among other things, but
+ # is not strictly required (bug 470020).
+ use logger dns entropy
+ if [ "${rc_need+set}" = "set" ] ; then
+ : # Do nothing, the user has explicitly set rc_need
+ else
+ local x warn_addr
+ for x in $(awk '/^ListenAddress/{ print $2 }' "$SSHD_CONFIG"
2>/dev/null) ; do
+ case "${x}" in
+ 0.0.0.0|0.0.0.0:*) ;;
+ ::|\[::\]*) ;;
+ *) warn_addr="${warn_addr} ${x}" ;;
+ esac
+ done
+ if [ -n "${warn_addr}" ] ; then
+ need net
+ ewarn "You are binding an interface in ListenAddress
statement in your sshd_config!"
+ ewarn "You must add rc_need=\"net.FOO\" to your
${RC_PREFIX%/}/etc/conf.d/sshd"
+ ewarn "where FOO is the interface(s) providing the
following address(es):"
+ ewarn "${warn_addr}"
+ fi
+ fi
+}
+
+checkconfig() {
+ checkpath --mode 0755 --directory "${RC_PREFIX%/}/var/empty"
+
+ if [ ! -e "${SSHD_CONFIG}" ] ; then
+ eerror "You need an ${SSHD_CONFIG} file to run sshd"
+ eerror "There is a sample file in /usr/share/doc/openssh"
+ return 1
+ fi
+
+ ${SSHD_KEYGEN_BINARY} -A || return 2
+
+ "${command}" -t ${command_args} || return 3
+}
+
+start_pre() {
+ # Make sure that the user's config isn't busted before we try
+ # to start the daemon (this will produce better error messages
+ # than if we just try to start it blindly).
+ #
+ # We always need to call checkconfig because this function will
+ # also generate any missing host key and you can start a
+ # non-running service with "restart" argument.
+ checkconfig || return $?
+}
+
+stop_pre() {
+ if [ "${RC_CMD}" = "restart" ] ; then
+ # If this is a restart, check to make sure the user's config
+ # isn't busted before we stop the running daemon.
+ checkconfig || return $?
+ elif yesno "${RC_GOINGDOWN}" && [ -s "${pidfile}" ] && hash pgrep
2>/dev/null ; then
+ # Disconnect any clients before killing the master process
+ local pid=$(cat "${pidfile}" 2>/dev/null)
+ if [ -n "${pid}" ] ; then
+ local ssh_session_pattern='sshd: \S.*@pts/[0-9]+'
+
+ IFS="${IFS}@"
+ local daemon pid pty user
+ pgrep -a -P ${pid} -f "$ssh_session_pattern" | while
read pid daemon user pty ; do
+ ewarn "Found ${daemon%:} session ${pid} on
${pty}; sending SIGTERM ..."
+ kill "${pid}" || true
+ done
+ fi
+ fi
+}
+
+reload() {
+ checkconfig || return $?
+ ebegin "Reloading ${SVCNAME}"
+ start-stop-daemon --signal HUP --pidfile "${pidfile}"
+ eend $?
+}
diff --git a/net-misc/openssh/openssh-8.5_p1-r1.ebuild
b/net-misc/openssh/openssh-8.5_p1-r1.ebuild
index 8aea025ac78..96e4f161abd 100644
--- a/net-misc/openssh/openssh-8.5_p1-r1.ebuild
+++ b/net-misc/openssh/openssh-8.5_p1-r1.ebuild
@@ -61,10 +61,10 @@ LIB_DEPEND="
ssl? (
|| (
(
- >=dev-libs/openssl-1.0.1:0[bindist=]
- <dev-libs/openssl-1.1.0:0[bindist=]
+ >=dev-libs/openssl-1.0.1:0[bindist(-)=]
+ <dev-libs/openssl-1.1.0:0[bindist(-)=]
)
- >=dev-libs/openssl-1.1.0g:0[bindist=]
+ >=dev-libs/openssl-1.1.0g:0[bindist(-)=]
)
dev-libs/openssl:0=[static-libs(+)]
)
diff --git a/net-misc/openssh/openssh-8.6_p1-r1.ebuild
b/net-misc/openssh/openssh-8.6_p1-r1.ebuild
index 0e9654a5044..f896a51951a 100644
--- a/net-misc/openssh/openssh-8.6_p1-r1.ebuild
+++ b/net-misc/openssh/openssh-8.6_p1-r1.ebuild
@@ -66,10 +66,10 @@ LIB_DEPEND="
ssl? (
|| (
(
- >=dev-libs/openssl-1.0.1:0[bindist=]
- <dev-libs/openssl-1.1.0:0[bindist=]
+ >=dev-libs/openssl-1.0.1:0[bindist(-)=]
+ <dev-libs/openssl-1.1.0:0[bindist(-)=]
)
- >=dev-libs/openssl-1.1.0g:0[bindist=]
+ >=dev-libs/openssl-1.1.0g:0[bindist(-)=]
)
dev-libs/openssl:0=[static-libs(+)]
)
