commit: 762b5f10768e1f04aacffcff5363ab446842fdd9
Author: Jakov Smolic <jakov.smolic <AT> sartura <DOT> hr>
AuthorDate: Sat Feb 13 10:14:29 2021 +0000
Commit: David Seifert <soap <AT> gentoo <DOT> org>
CommitDate: Sat Feb 13 10:14:29 2021 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=762b5f10
dev-embedded/openocd: Remove old
Signed-off-by: Jakov Smolic <jakov.smolic <AT> sartura.hr>
Signed-off-by: David Seifert <soap <AT> gentoo.org>
dev-embedded/openocd/openocd-0.10.0.ebuild | 142 -----------------------------
1 file changed, 142 deletions(-)
diff --git a/dev-embedded/openocd/openocd-0.10.0.ebuild
b/dev-embedded/openocd/openocd-0.10.0.ebuild
deleted file mode 100644
index 671c16ab48f..00000000000
--- a/dev-embedded/openocd/openocd-0.10.0.ebuild
+++ /dev/null
@@ -1,142 +0,0 @@
-# Copyright 1999-2019 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI="5"
-
-inherit eutils multilib flag-o-matic toolchain-funcs udev
-
-# One ebuild to rule them all
-if [[ ${PV} == *9999 ]] ; then
- inherit autotools git-r3
- EGIT_REPO_URI="https://git.code.sf.net/p/${PN}/code";
-else
- MY_PV="${PV/_/-}"
- MY_P="${PN}-${MY_PV}"
- S="${WORKDIR}"/${MY_P}
- KEYWORDS="amd64 ~arm x86"
-
SRC_URI="mirror://sourceforge/project/${PN}/${PN}/${MY_PV}/${MY_P}.tar.gz"
-fi
-
-DESCRIPTION="OpenOCD - Open On-Chip Debugger"
-HOMEPAGE="http://openocd.sourceforge.net";
-
-LICENSE="GPL-2+"
-SLOT="0"
-IUSE="+cmsis-dap dummy +ftdi +jlink parport +usb verbose-io"
-RESTRICT="strip" # includes non-native binaries
-
-RDEPEND="
- acct-group/plugdev
- >=dev-lang/jimtcl-0.76
- cmsis-dap? ( dev-libs/hidapi )
- jlink? ( dev-embedded/libjaylink )
- usb? (
- virtual/libusb:0
- virtual/libusb:1
- )
- ftdi? ( dev-embedded/libftdi:= )"
-
-DEPEND="${RDEPEND}
- virtual/pkgconfig"
-[[ ${PV} == "9999" ]] && DEPEND+=" >=sys-apps/texinfo-5" #549946
-
-src_prepare() {
- epatch_user
-
- if [[ ${PV} == "9999" ]] ; then
- AT_NO_RECURSIVE=yes eautoreconf
- fi
-}
-
-src_configure() {
- # Here are some defaults
- local myconf=(
- --enable-buspirate
- --disable-werror
- --disable-internal-jimtcl
- --disable-internal-libjaylink
- --enable-amtjtagaccel
- --enable-ep93xx
- --enable-at91rm9200
- --enable-gw16012
- --enable-arm-jtag-ew
- --enable-sysfsgpio
- --enable-bcm2835gpio
- )
-
- # Adapters requiring usb/libusb-1.X support
- if use usb; then
- myconf+=(
- --enable-aice
- --enable-usb-blaster-2
- --enable-ftdi
- --enable-ti-icdi
- --enable-ulink
- --enable-osbdm
- --enable-opendous
- --enable-usbprog
- --enable-rlink
- --enable-stlink
- --enable-vsllink
- --enable-armjtagew
- $(use_enable verbose-io verbose-usb-io)
- $(use_enable verbose-io verbose_usb_comms)
- )
- else
- myconf+=(
- --disable-aice
- --disable-usb-blaster-2
- --disable-ftdi
- --disable-ti-icdi
- --disable-ulink
- --disable-osbdm
- --disable-opendous
- --disable-usbprog
- --disable-rlink
- --disable-stlink
- --disable-vsllink
- --disable-armjtagew
- )
- fi
-
- if use jlink; then
- myconf+=(
- --enable-jlink
- )
- else
- myconf+=(
- --disable-jlink
- )
- fi
-
- if use ftdi; then
- myconf+=(
- --enable-usb-blaster
- --enable-openjtag
- --enable-presto
- )
- else
- myconf+=(
- --disable-openjtag
- --disable-presto
- --disable-usb-blaster
- )
- fi
-
- econf \
- $(use_enable dummy) \
- $(use_enable cmsis-dap) \
- $(use_enable parport) \
- $(use_enable parport parport_ppdev) \
- $(use_enable verbose-io verbose-jtag-io) \
- "${myconf[@]}"
-}
-
-src_install() {
- default
- udev_dorules "${D}"/usr/share/${PN}/contrib/*.rules
-}
-
-pkg_postinst() {
- elog "To access openocd devices as user you must be in the plugdev
group"
-}
