commit: ce67098bd64381d23f0dd403a4672b9b416a99ac Author: Matthew Thode <prometheanfire <AT> gentoo <DOT> org> AuthorDate: Sun Mar 18 19:14:46 2018 +0000 Commit: Matt Thode <prometheanfire <AT> gentoo <DOT> org> CommitDate: Sun Mar 18 19:15:07 2018 +0000 URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=ce67098b
sys-auth/nss-pam-ldapd: 0.9.9 stable amd64 and x86 with cleanup Package-Manager: Portage-2.3.24, Repoman-2.3.6 .../nss-pam-ldapd/nss-pam-ldapd-0.9.8-r2.ebuild | 163 --------------------- sys-auth/nss-pam-ldapd/nss-pam-ldapd-0.9.9.ebuild | 2 +- 2 files changed, 1 insertion(+), 164 deletions(-) diff --git a/sys-auth/nss-pam-ldapd/nss-pam-ldapd-0.9.8-r2.ebuild b/sys-auth/nss-pam-ldapd/nss-pam-ldapd-0.9.8-r2.ebuild deleted file mode 100644 index d286f5f9a46..00000000000 --- a/sys-auth/nss-pam-ldapd/nss-pam-ldapd-0.9.8-r2.ebuild +++ /dev/null @@ -1,163 +0,0 @@ -# Copyright 1999-2017 Gentoo Foundation -# Distributed under the terms of the GNU General Public License v2 - -EAPI=6 - -PYTHON_COMPAT=(python2_7) -inherit eutils prefix user python-r1 multilib multilib-minimal systemd s6 - -DESCRIPTION="NSS module for name lookups using LDAP" -HOMEPAGE="http://arthurdejong.org/nss-pam-ldapd/"; -SRC_URI="http://arthurdejong.org/${PN}/${P}.tar.gz"; - -LICENSE="LGPL-2.1" -SLOT="0" -KEYWORDS="~amd64 ~x86" -IUSE="debug kerberos +pam pynslcd sasl test +utils" - -COMMON_DEP=" - net-nds/openldap[${MULTILIB_USEDEP}] - sasl? ( dev-libs/cyrus-sasl[${MULTILIB_USEDEP}] ) - kerberos? ( virtual/krb5[${MULTILIB_USEDEP}] ) - virtual/pam[${MULTILIB_USEDEP}] - utils? ( ${PYTHON_DEPS} ) - pynslcd? ( - dev-python/python-ldap[${PYTHON_USEDEP}] - dev-python/python-daemon[${PYTHON_USEDEP}] - ) - !sys-auth/nss_ldap - !sys-auth/pam_ldap" -RDEPEND="${COMMON_DEP}" -DEPEND="${COMMON_DEP} - test? ( - ${PYTHON_DEPS} - dev-python/pylint[${PYTHON_USEDEP}] - ) - sys-devel/automake" - -REQUIRED_USE=" - utils? ( ${PYTHON_REQUIRED_USE} ) - test? ( ${PYTHON_REQUIRED_USE} pynslcd )" - -PATCHES=( - "${FILESDIR}"/${PN}-0.9.4-disable-py3-only-linters.patch - "${FILESDIR}"/${PN}-0.9.8-pynslcd-module-paths.patch -) - -pkg_setup() { - enewgroup nslcd - enewuser nslcd -1 -1 -1 nslcd -} - -src_prepare() { - cp pynslcd/pynslcd.py "${S}" || die "Copying pynslcd failed" - - default - use utils && python_setup - touch pynslcd/__init__.py || die "Could not create __init__.py for pynslcd" -} - -multilib_src_configure() { - local -a myconf - - myconf=( - --disable-utils - --enable-warnings - --with-ldap-lib=openldap - --with-ldap-conf-file=/etc/nslcd.conf - --with-nslcd-pidfile=/run/nslcd/nslcd.pid - --with-nslcd-socket=/run/nslcd/socket - $(usex x86-fbsd '--with-nss-flavour=' '--with-nss-flavour=' 'freebsd' 'glibc') - $(use_enable pynslcd) - $(use_enable debug) - $(use_enable kerberos) - $(use_enable pam) - $(use_enable sasl) - ) - - # nss libraries always go in /lib on Gentoo - if multilib_is_native_abi ; then - myconf+=("--with-pam-seclib-dir=${EPREFIX}/$(get_libdir)/security") - myconf+=("--libdir=${EPREFIX}/$(get_libdir)") - else - myconf+=("--with-pam-seclib-dir=/$(get_libdir)/security") - myconf+=("--libdir=/$(get_libdir)") - fi - - ECONF_SOURCE="${S}" econf "${myconf[@]}" -} - -multilib_src_install_all() { - local script - - newinitd "${FILESDIR}"/nslcd-init-r1 nslcd - newinitd "${FILESDIR}"/nslcd-init-r2 nslcd - s6_install_service nslcd "${FILESDIR}"/nslcd-run-s6 - - insinto /usr/share/nss-pam-ldapd - doins "${WORKDIR}/${P}/nslcd.conf" - - fperms o-r /etc/nslcd.conf - - if use utils; then - python_moduleinto nslcd - python_foreach_impl python_domodule utils/*.py - - for script in chsh getent; do - python_foreach_impl python_newscript utils/${script}.py ${script}.ldap - done - fi - if use pynslcd; then - rm -rf "${D}"/usr/share/pynslcd - python_moduleinto pynslcd - python_foreach_impl python_domodule pynslcd/*.py - python_scriptinto /usr/sbin - python_newscript pynslcd.py pynslcd - newinitd "${FILESDIR}"/pynslcd.initd pynslcd - fi - - systemd_newtmpfilesd "${FILESDIR}"/nslcd-tmpfiles.conf nslcd.conf - systemd_dounit "${FILESDIR}"/nslcd.service -} - -multilib_src_install() { - emake DESTDIR="${D}" install - - if use pynslcd; then - python_moduleinto pynslcd - python_foreach_impl python_domodule pynslcd/*.py - fi -} - -python_test() { - PYTHONPATH="${S}" emake check -} - -multilib_src_test() { - pushd "${BUILD_DIR}" - ln -s ../pynslcd/constants.py utils/constants.py - python_foreach_impl python_test - popd -} - -pkg_postinst() { - echo - elog "For this to work you must configure /etc/nslcd.conf" - elog "This configuration is similar to pam_ldap's /etc/ldap.conf" - echo - elog "In order to use nss-pam-ldapd, nslcd needs to be running. You can" - elog "start it like this:" - elog " # /etc/init.d/nslcd start" - echo - elog "You can add it to the default runlevel like so:" - elog " # rc-update add nslcd default" - elog - elog "If you have >=sys-apps/openrc-0.16.3, you can also use s6" - elog "to supervise this service." - elog "To do this, emerge sys-apps/s6 then add nslcd-s6" - elog "default runlevel instead of nslcd." - elog - elog "If you are upgrading, keep in mind that /etc/nss-ldapd.conf" - elog " is now named /etc/nslcd.conf" - echo -} diff --git a/sys-auth/nss-pam-ldapd/nss-pam-ldapd-0.9.9.ebuild b/sys-auth/nss-pam-ldapd/nss-pam-ldapd-0.9.9.ebuild index 7b25079038a..bdec7ea6e24 100644 --- a/sys-auth/nss-pam-ldapd/nss-pam-ldapd-0.9.9.ebuild +++ b/sys-auth/nss-pam-ldapd/nss-pam-ldapd-0.9.9.ebuild @@ -12,7 +12,7 @@ SRC_URI="http://arthurdejong.org/${PN}/${P}.tar.gz"; LICENSE="LGPL-2.1" SLOT="0" -KEYWORDS="~amd64 ~x86" +KEYWORDS="amd64 x86" IUSE="debug kerberos +pam pynslcd sasl test +utils" COMMON_DEP="
