commit: 2703ce66f6b75e00d3ef16289cb4aa3a24a3024f
Author: Ulrich Müller <ulm <AT> gentoo <DOT> org>
AuthorDate: Fri Aug 18 13:58:06 2017 +0000
Commit: Ulrich Müller <ulm <AT> gentoo <DOT> org>
CommitDate: Fri Aug 18 13:58:06 2017 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=2703ce66
licenses: Remove unused MolSoft license.
licenses/MolSoft | 110 -------------------------------------------------------
1 file changed, 110 deletions(-)
diff --git a/licenses/MolSoft b/licenses/MolSoft
deleted file mode 100644
index 965c2b39dbe..00000000000
--- a/licenses/MolSoft
+++ /dev/null
@@ -1,110 +0,0 @@
-Molsoft LLC
-License Agreement Applicable to the Molsoft ICM Software Downloaded from the
-MolSoft Web Site at www.molsoft.com
-
-IMPORTANT - READ CAREFULLY BEFORE INSTALLING SOFTWARE THE SOFTWARE YOU ARE
ABOUT TO ACCESS CONTAINS PROGRAMS, DOCUMENTATION, AND OTHER PROPRIETARY
MATERIAL ("SOFTWARE") THAT BELONGS TO MOLSOFT LLC. POSSESSION AND USE OF THE
SOFTWARE IS SUBJECT TO THIS SOFTWARE LICENSE AGREEMENT (THE "LICENSE"). BY
CLICKING THE ACCEPT BUTTON YOU AND YOUR EMPLOYER (IF THE SOFTWARE IS BEING USED
IN THE COURSE OF YOUR DUTIES OF EMPLOYMENT) REPRESENT AND WARRANT THAT:(A) YOU
HAVE READ AND AGREE TO BE FULLY BOUND BY AND BECOME A PARTY TO THIS LICENSE;
AND (B) YOU ARE NOT (1) A NATIONAL OR RESIDENT OF CUBA, LIBYA, IRAQ, IRAN,
SUDAN, SYRIA, OR NORTH KOREA; (2) YOU ARE NOT THE U.S. TREASURY DEPARTMENT'S
LIST OF SPECIALLY DESIGNATED NATIONALS, TERRORISTS, AND NARCOTICS TRAFFICKERS
OR THE U.S. COMMERC DEPARTMENT'S TABLE OF DENY ORDERS OR THE U.S. STATE
DEPARTMENT'S PROLIFERATION ENTITY LIST. (C) IN THE EVENT THAT YOU DO NOT AGREE
TO ALL THE TERMS AND CONDITIONS OF THIS LICENSE, OR, IF YOU CANNOT WARRANT THAT
YOU ARE NOT IN VIOLATION OF (B) ABOVE, YOU ARE NOT AUTHORIZED TO INSTALL, USE
OR POSSESS THE SOFTWARE AND MUST IMMEDIATELY CEASE TO INSTALL THE SOFTWARE.
-
-This Agreement has three parts. Part I applies if you have NOT purchased a
license to the accompanying software (the "Software"). Part II applies if you
have purchased a license to the Software. Part III applies to all license
grants. If you initially acquired a copy of the Software without purchasing a
license and you wish to purchase a license, contact MolSoft L.L.C. ("Molsoft
LLC") on the Internet at http://www.MolSoft.com or by email to [email protected].
-
-PART I -- TERMS APPLICABLE WHEN LICENSE FEES NOT (YET) PAID (LIMITED TO
EVALUATION, EDUCATIONAL AND NON-PROFIT USES).
-
-Molsoft LLC grants you a non-exclusive license to use the Software free of
charge if (a) you are a student, faculty member or staff member of an
educational institution (K-12, junior college, college or library), a staff
member of a religious organization, or an employee of an organization which
meets Molsoft LLC's criteria for a charitable non-profit organization; or (b)
your use of the Software is for the purpose of evaluating whether to purchase
an ongoing license to the Software. The evaluation period for use by or on
behalf of a commercial entity is limited to 14 days unless Molsoft's written
consent is obtained. Evaluation use by others is not subject to the 14 day
limit. Government agencies (other than public libraries) are not considered
educational, religious, or charitable non-profit organizations for purposes of
this Agreement. If you are using the Software free of charge, you are not
entitled to hard-copy documentation, support or telephone assistance. If you
fit wit
hin the description above, you may use the Software in the manner described in
Part III below under "Scope of Grant."
-
-DISCLAIMER OF WARRANTY.
-
-Free of charge Software is provided on an "AS IS" basis, without warranty of
any kind, including without limitation the warranties of merchantability,
fitness for a particular purpose and non-infringement. The entire risk as to
the quality and performance of the Software is borne by you. Should the
Software prove defective, you and not Molsoft LLC assume the entire cost of any
service and repair. You must determine that the Software sufficiently meets
your requirements. This disclaimer of warranty constitutes an essential part of
the agreement. SOME JURISDICTIONS DO NOT ALLOW EXCLUSIONS OF AN IMPLIED
WARRANTY, SO THIS DISCLAIMER MAY NOT APPLY TO YOU AND YOU MAY HAVE OTHER LEGAL
RIGHTS THAT VARY BY JURISDICTION.
-
-PART II -- TERMS APPLICABLE WHEN LICENSE FEES PAID.
-
-GRANT. Subject to payment of applicable license fees, Molsoft LLC grants to
you a limited, non-exclusive, non-transferable license to use the Software and
accompanying documentation ("Documentation") in the manner described in Part
III below under "Scope of Grant."
-
-LIMITED WARRANTY.
-
-Molsoft LLC warrants that for a period of ninety (90) days from the date of
acquisition, the Software, if operated as directed, will substantially achieve
the functionality described in the Documentation. Molsoft LLC does not warrant,
however, that your use of the Software will be uninterrupted or that the
operation of the Software will be error-free or secure. You must determine
that the Software sufficiently meets your requirements. Molsoft LLC also
warrants that the media containing the Software, if provided by Molsoft LLC, is
free from defects in material and workmanship and will so remain for ninety
(90) days from the date you acquired the Software. Molsoft LLC's sole liability
for any breach of this warranty shall be, in Molsoft LLC's sole discretion: (i)
to replace your defective media; or (ii) to advise you how to achieve
substantially the same functionality with the Software as described in the
Documentation through a procedure different from that set forth in the Documen
tation; or (iii) if the above remedies are impracticable, to refund the
license fee you paid for the Software. Repaired, corrected, or replaced
Software and Documentation shall be covered by this limited warranty for the
period remaining under the warranty that covered the original Software, or if
longer, for thirty (30) days after the date (a) of shipment to you of the
repaired or replaced Software, or (b) Molsoft LLC advised you how to operate
the Software so as to achieve the functionality described in the Documentation.
Only if you inform Molsoft LLC of your problem with the Software during the
applicable warranty period and provide evidence of the date you purchased a
license to the Software will Molsoft LLC be obligated to honor this warranty.
Molsoft LLC will use reasonable commercial efforts to repair, replace, advise,
or, for individual consumers, refund pursuant to the foregoing warranty within
30 days of being so notified.
-
-THIS IS A LIMITED WARRANTY, AND IT IS THE ONLY WARRANTY MADE BY MOLSOFT LLC.
MOLSOFT LLC MAKES NO OTHER EXPRESS WARRANTY AND NO WARRANTY OF NONINFRINGEMENT
OF THIRD PARTIES' RIGHTS. THE DURATION OF IMPLIED WARRANTIES, INCLUDING WITHOUT
LIMITATION, WARRANTIES OF MERCHANTABILITY AND OF FITNESS FOR A PARTICULAR
PURPOSE, IS LIMITED TO THE ABOVE LIMITED WARRANTY PERIOD; SOME JURISDICTIONS DO
NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO LIMITATIONS MAY
NOT APPLY TO YOU. NO MOLSOFT LLC DEALER, AGENT, OR EMPLOYEE IS AUTHORIZED TO
MAKE ANY MODIFICATIONS, EXTENSIONS, OR ADDITIONS TO THIS WARRANTY.
-
-If any modifications are made to the Software by you during the warranty
period; if the media is subjected to accident, abuse, or improper use; or if
you violate the terms of this Agreement, then this warranty shall immediately
be terminated. This warranty shall not apply if the Software is used on or in
conjunction with hardware or software other than the unmodified version of
hardware and software with which the software was designed to be used as
described in the Documentation. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS,
AND YOU MAY HAVE OTHER LEGAL RIGHTS THAT VARY BY JURISDICTION.
-
-PART III -- TERMS APPLICABLE TO ALL LICENSE GRANTS.
-
-SCOPE OF GRANT.
-
-You may:
-
-* use the Software on any single computer;
-
-* use the Software on a network, provided that each person accessing the
Software through the network has a copy of the Software licensed to that person;
-
-* use the Software on a second computer so long as only one copy is used
at a time;
-
-* copy the Software for archival purposes, provided any copy must contain
all of
-the original Software's proprietary notices; or
-
-* if you have purchased a Pack of licenses for the Software (but not the
Documentation), provided any copy must contain all of the original Software's
proprietary notices. The number of copies is the total number of copies that
may be made for all platforms. Additional copies of Documentation may be
purchased.
-
-You may not:
-
-* permit other individuals to use the Software except under the terms
listed above;
-
-* permit concurrent use of the Software;
-
-* modify, translate, reverse engineer, decompile, disassemble (except to
the extent applicable laws specifically prohibit such restriction), or create
derivative works based on the Software;
-
-* copy the Software other than as specified above;
-
-* rent, lease, grant a security interest in, or otherwise transfer rights
to the Software;
-
-or
-
-* remove any proprietary notices or labels on the Software.
-
-TITLE.
-
-Title, ownership rights, and intellectual property rights in the Software and
Documentation shall remain in Molsoft LLC. The Software and Documentation are
protected by copyright and other intellectual property laws and by
international treaties. Title and related rights in the content accessed
through the Software is the property of the applicable content owner and may be
protected by applicable law. This License gives you no rights to such content.
-
-TERMINATION.
-
-The license will terminate automatically if you fail to comply with the
limitations described herein. On termination, you must destroy all copies of
the Software and Documentation.
-
-USE OF FREE LIBRARY.
-
-Molsoft ICM Version 3.0 uses a free library called Qwt for building its
executable. The Qwt library is found in the ICM 3.0 file "qwt.dll" in the
distribution and is available under the GNU Lesser General Public License,
which is available at http://www.gnu.org/copyleft/lesser.html. According to
the terms of the GNU Lesser General Public License for the use of Qwt,
Licensees are free to modify the source code for Qwt, which can be found at:
-
-http://sourceforge.net/projects/qwt.
-
-You are free to modify the content of the Qwt library and recompile the
library, but you are prohibited from changing the content of the definition
file. The following disclaimer applies to the Qwt library:
-
-This library is free software; you can redistribute it and/or modify it under
the terms of the GNU Lesser General Public License as published by the Free
Software Foundation; either version 2.1 of the License, or (at your option) any
later version. This library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License
for more details. You should have received a copy of the GNU Lesser General
Public License along with this library; if not, write to the Free Software
Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-
-Molsoft LLC hereby disclaims all copyright interest in the library "Qwt" (a
library containing GUI components and utility classes) written by Josef Wilgen.
However, the remainder of ICM Version 3.0 is protected by Copyright (c)
1989-2002 Molsoft LLC.
-
-LICENSES INCLUDING THE MINI-XPDB OR THE XPDB DATABASE.
-
-Molsoft LLC's XPDB and the Mini-XPDB databases contain all known proteins
annotated in a form designed for rapid and accurate use with Molsoft ICM
Software. Molsoft XPDB and Mini-XPDB are derived from data freely available
from the Protein Data Bank and found at www.rcsb.org/pdb. Molsoft wishes to
acknowledge the source of the PBD data files: H.M. Berman, J. Westbrook, Z.
Feng, G. Gilliland, T.N. Bhat, H. Weissig, I.N. Shindyalov, P.E. Bourne: The
Protein Data Bank. Nucleic Acids Research, 28 pp. 235-242 (2000). Users of
Molsoft XPDB and Mini-XPDB should note that users assume all responsibility for
insuring that intellectual property claims associated with any data set
appearing in the Molosft XPDB are honored. Molsoft's XPDB and Mini-XPDB data
files do not contain any information on intellectual property claims with the
exception in some cases of a reference for a patent involving the structure.
Molsoft XPDB and Mini-XPDB files are provided on an "as is" basis, and Molsoft
canno
t be held liable to any party for direct, indirect, special, incidental, or
consequential damages, including lost profits, arising from the use of the
materials. The resources provided by Molsoft XPDB and Mini-XPDB are provided
WITHOUT
-
-WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED. THIS INCLUDES BUT IS NOT
LIMITED TO MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. MOLSOFT LLC
MAKES NO REPRESENTATION THAT ITS XPDB RESOURCES WILL NOT INFRINGE ANY PATENT OR
OTHER PROPRIETARY RIGHT.
-
-EXPORT CONTROLS.
-
-None of the Software or underlying information or technology may be downloaded
or otherwise exported or reexported (i) into (or to a national or resident of)
Cuba, Iraq, Libya, Yugoslavia, North Korea, Iran, Syria or any other country to
which the U.S. has embargoed goods; or (ii) to anyone on the U.S. Treasury
Department's list of Specially Designated Nationals or the U.S. Commerce
Department's Table of Denial Orders. By downloading or using the Software, you
are agreeing to the foregoing and you are representing and warranting that you
are not located in, under the control of, or a national or resident of any such
country or on any such list.
-
-In addition, if the licensed Software is identified as a not-for-export
product (for example, on the box, media or in the installation process), then
the following applies:
-
-EXCEPT FOR EXPORT TO CANADA FOR USE IN CANADA BY CANADIAN CITIZENS, THE
SOFTWARE AND ANY UNDERLYING TECHNOLOGY MAY NOT BE EXPORTED OUTSIDE THE UNITED
STATES OR TO ANY FOREIGN ENTITY OR "FOREIGN PERSON" AS DEFINED BY U.S.
GOVERNMENT EGULATIONS, INCLUDING WITHOUT LIMITATION, ANYONE WHO IS NOT A
CITIZEN, NATIONAL OR LAWFUL PERMANENT RESIDENT OF THE UNITED STATES. BY
DOWNLOADING OR USING THE SOFTWARE, YOU ARE AGREEING TO THE FOREGOING AND YOU
ARE WARRANTING THAT YOU ARE NOT A "FOREIGN PERSON" OR UNDER THE CONTROL OF A
FOREIGN PERSON.
-
-LIMITATION OF LIABILITY.
-
-UNDER NO CIRCUMSTANCES AND UNDER NO LEGAL THEORY, TORT, CONTRACT, OR
OTHERWISE, SHALL MOLSOFT LLC OR ITS SUPPLIERS OR RESELLERS BE LIABLE TO YOU OR
ANY OTHER PERSON FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
DAMAGES OF ANY CHARACTER INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF
GOODWILL, WORK STOPPAGE, COMPUTER FAILURE OR MALFUNCTION, OR ANY AND ALL OTHER
COMMERCIAL DAMAGES OR LOSSES. IN NO EVENT WILL MOLSOFT LLC BE LIABLE FOR ANY
DAMAGES IN EXCESS OF THE AMOUNT MOLSOFT LLC RECEIVED FROM YOU FOR A LICENSE TO
THE SOFTWARE, EVEN IF MOLSOFT LLC SHALL HAVE BEEN INFORMED OF THE POSSIBILITY
OF SUCH DAMAGES, OR FOR ANY CLAIM BY ANY OTHER PARTY. THIS LIMITATION OF
LIABILITY SHALL NOT APPLY TO LIABILITY FOR DEATH OR PERSONAL INJURY TO THE
EXTENT APPLICABLE LAW PROHIBITS SUCH LIMITATION. FURTHERMORE, SOME
JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES, SO THIS LIMITATION AND EXCLUSION MAY NOT APPLY TO YOU.
-
-HIGH RISK ACTIVITIES.
-
-The Software is not fault-tolerant and is not designed, manufactured or
intended for use or resale as on-line control equipment in hazardous
environments requiring fail-safe performance, such as in the operation of
nuclear facilities, aircraft navigation or communication systems, air traffic
control, direct life support machines, or weapons systems, in which the failure
of the Software could lead directly to death, personal injury, or severe
physical or environmental damage ("High Risk Activities"). Molsoft LLC
specifically disclaims any express or implied warranty of fitness for High Risk
Activities.
-
-MISCELLANEOUS.
-
-If the copy of the Software you received was accompanied by a printed or other
form of a "hard-copy" Software License Agreement whose terms vary from this
Agreement, then the hard-copy Software License Agreement governs your use of
the Software. This Agreement represents the complete agreement concerning this
license and may be amended only by a writing executed by both parties. THE
ACCEPTANCE OF ANY PURCHASE ORDER PLACED BY YOU IS EXPRESSLY MADE CONDITIONAL ON
YOUR ASSENT TO THE TERMS SET FORTH HEREIN AND NOT THOSE IN YOUR PURCHASE ORDER.
If any provision of this Agreement is held to be unenforceable, such provision
shall be reformed only to the extent necessary to make it enforceable. This
Agreement shall be governed by California law (except for conflict of law
provisions). The application the United Nations Convention of Contracts for the
International Sale of Goods is expressly excluded.
-
-U.S. GOVERNMENT RESTRICTED RIGHTS.
-
-Use, duplication or disclosure by the Government is subject to restrictions
set forth in subparagraphs(a) through (d) of the Commercial Computer-Restricted
Rights clause at FAR 52.227-19 when applicable, or in subparagraph (c)(1)(ii)
of the Rights in Technical Data and Computer Software clause at DFARS
252.227-7013, or at 252.211-7015, or to Molsoft LLC's standard commercial
license, as applicable, and in similar clauses in the NASA FAR Supplement.
Contractor/manufacturer is Molsoft, L.L.C., 3366 No. Torrey Pines Ct., Ste.
300, La Jolla, CA 92037 USA.
