commit: 59d13589498eab0111ea397d3d09b3e1f3410cb5 Author: Kristian Fiskerstrand <k_f <AT> gentoo <DOT> org> AuthorDate: Sat Jul 8 15:47:46 2017 +0000 Commit: Kristian Fiskerstrand <k_f <AT> gentoo <DOT> org> CommitDate: Sat Jul 8 15:48:42 2017 +0000 URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=59d13589
net-misc/sks: Add slot operator on ocaml Since resulting binary is static linked with ocaml we need a subslot dep in order to ensure rebuild to pick up security upgrades etc straight to stable bump Package-Manager: Portage-2.3.6, Repoman-2.3.1 RepoMan-Options: --force net-misc/sks/sks-1.1.6-r2.ebuild | 117 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 117 insertions(+) diff --git a/net-misc/sks/sks-1.1.6-r2.ebuild b/net-misc/sks/sks-1.1.6-r2.ebuild new file mode 100644 index 00000000000..b51abaff413 --- /dev/null +++ b/net-misc/sks/sks-1.1.6-r2.ebuild @@ -0,0 +1,117 @@ +# Copyright 1999-2017 Gentoo Foundation +# Distributed under the terms of the GNU General Public License v2 + +EAPI=6 + +inherit multilib user readme.gentoo-r1 systemd + +DESCRIPTION="An OpenPGP keyserver which is decentralized with highly reliable synchronization" +HOMEPAGE="https://bitbucket.org/skskeyserver/sks-keyserver"; +SRC_URI="https://bitbucket.org/skskeyserver/sks-keyserver/downloads/${P}.tgz"; +LICENSE="GPL-2" +SLOT="0" +KEYWORDS="amd64 ~x86" +IUSE="optimize test" +DOC_CONTENTS="To get sks running, first build the database, +start the database, import atleast one key, then +run a cleandb. See the sks man page for more information +Typical DB_CONFIG file and sksconf has been installed +in /var/lib/sks and can be used as templates by renaming +to remove the .typical extension. The DB_CONFIG file has +to be in place before doing the database build, or the BDB +environment has to be manually cleared from both KDB and PTree. +The same applies if you are upgrading to this version with an existing KDB/Ptree, +using another version of BDB than 4.8; you need to clear the environment +using e.g. db4.6_recover -h . and db4.6_checkpoint -1h . in both KDB and PTree +Additionally a sample web interface has been installed as +web.typical in /var/lib/sks that can be used by renaming it to web +Important: It is strongly recommended to set up SKS behind a +reverse proxy. Instructions on properly configuring SKS can be +found at https://bitbucket.org/skskeyserver/sks-keyserver/wiki/Peering"; + +DEPEND=">=dev-lang/ocaml-4.0:= + dev-ml/findlib + dev-ml/camlp4 + dev-ml/cryptokit:0/1.10 + sys-libs/db:5.3" +RDEPEND="${DEPEND}" + +pkg_setup() { + ebegin "Creating named group and user" + enewgroup sks + enewuser sks -1 -1 /var/lib/sks sks +} + +src_prepare() { + eapply "${FILESDIR}/${P}-unbundle-cryptokit.patch" + cp Makefile.local.unused Makefile.local || die + sed -i \ + -e "s:^BDBLIB=.*$:BDBLIB=-L/usr/$(get_libdir):g" \ + -e "s:^BDBINCLUDE=.*$:BDBINCLUDE=-I/usr/include/db5.3/:g" \ + -e "s:^LIBDB=.*$:LIBDB=-ldb-5.3:g" \ + -e "s:^PREFIX=.*$:PREFIX=${D}/usr:g" \ + -e "s:^MANDIR=.*$:MANDIR=${D}/usr/share/man:g" \ + Makefile.local || die + sed -i \ + -e 's:^CAMLINCLUDE= -I lib -I bdb$:CAMLINCLUDE= -I lib -I bdb -I +cryptokit:g' \ + -e 's:-Werror-implicit-function-declaration::g' \ + Makefile bdb/Makefile || die + sed -i \ + -e 's:/usr/sbin/sks:/usr/bin/sks:g' \ + sks_build.sh || die + eapply_user +} + +src_compile() { + emake dep + # sks build fails with paralell build in module Bdb + emake -j1 all + if use optimize; then + emake all.bc + fi +} + +src_test() { + ./sks unit_test || die +} + +src_install() { + if use optimize; then + emake install.bc + dosym /usr/bin/sks.bc usr/bin/sks + dosym /usr/bin/sks_add_mail.bc usr/bin/sks_add_mail + else + emake install + fi + + dodoc README.md + + newinitd "${FILESDIR}/sks-db.initd" sks-db + newinitd "${FILESDIR}/sks-recon.initd" sks-recon + newconfd "${FILESDIR}/sks.confd" sks + systemd_dounit "${FILESDIR}"/sks-db.service + systemd_dounit "${FILESDIR}"/sks-recon.service + + dodir "/var/lib/sks/web.typical" + insinto /var/lib/sks + newins sampleConfig/DB_CONFIG DB_CONFIG.typical + newins sampleConfig/sksconf.typical sksconf.typical + insinto /var/lib/sks/web.typical + doins sampleWeb/HTML5/* + + keepdir /var/lib/sks + readme.gentoo_create_doc +} + +pkg_postinst() { + readme.gentoo_print_elog + + if [[ -n ${REPLACING_VERSIONS} ]]; then + einfo "Note when upgrading from versions of SKS earlier than 1.1.4" + einfo "The default values for pagesize settings have changed. To continue" + einfo "using an existing DB without rebuilding, explicit settings have to be" + einfo "added to the sksconf file." + einfo "pagesize: 4" + einfo "ptree_pagesize: 1" + fi; +}
