commit: 2de09cceadfb09723764102c55a920429fe02c98 Author: Robin H. Johnson <robbat2 <AT> gentoo <DOT> org> AuthorDate: Sat Jul 1 18:58:37 2017 +0000 Commit: Robin H. Johnson <robbat2 <AT> gentoo <DOT> org> CommitDate: Sat Jul 1 18:58:55 2017 +0000 URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=2de09cce
app-backup/amanda: cleanup, per bug #537248. Package-Manager: portage-2.3.6 app-backup/amanda/Manifest | 3 - app-backup/amanda/amanda-3.3.3-r1.ebuild | 477 ------------------------------- app-backup/amanda/amanda-3.3.3.ebuild | 468 ------------------------------ app-backup/amanda/amanda-3.3.5.ebuild | 477 ------------------------------- app-backup/amanda/amanda-3.3.7.ebuild | 474 ------------------------------ 5 files changed, 1899 deletions(-) diff --git a/app-backup/amanda/Manifest b/app-backup/amanda/Manifest index 8f28f5f72ec..3813e4aaff5 100644 --- a/app-backup/amanda/Manifest +++ b/app-backup/amanda/Manifest @@ -1,6 +1,3 @@ -DIST amanda-3.3.3.tar.gz 4394935 SHA256 c36c9cd61dc62a7824abb7ba74cc4b09527bd82a930d691cf207b60b4bb15b72 SHA512 42af74a9e3b3fd92600e78d98eb4cdcf9d260bd9bbd016dde4133db346374deb41e4893159205336b35521c36f737c2877fd5030028531e1c09a0a6ac2931ba9 WHIRLPOOL 730deda1d85e645e658500a01ea72895f836a3dd99209314a65161674da24fed5aad98313a8ef66ef76176c6c7b1a60e62d30d692cfe2121eb429d9cb37f5636 -DIST amanda-3.3.5.tar.gz 4530463 SHA256 17d14cdc64e5b98270a2ad6c1b58a5e317ab2fe0d518a4212f82f7e3d13d231b SHA512 bef1f5271939e804387424924e6423537efa3ac1a722fe68f3afd77677e5974d8325f1a32a2a22d510344ee3d7b8f480a969611388fcb632c0f3cd640315f812 WHIRLPOOL 5ba8c2734cbd3a7e771b9fc7f9561596e5cda3dce1ea60b7192893fcca401e1c5da6154dcac18084ce6ef5ccacdf4899a65e255424f1bbbdafc219e8405669e4 -DIST amanda-3.3.7.tar.gz 4618547 SHA256 cd1534c7d9c5b97afcb52b189f05fb158972fadb2cf46249847ae8bc5ad8a78a SHA512 33066a34f5da5a37f4e8b18a365c2e5ae9cd9105a1ed05f74df95d03937bddee25167960e3daf519d3cf04b1580d9e617e48ba1a695fe683823a27ec298582f4 WHIRLPOOL 21c1c70d04bf8f503158d3facdf4dd479ae26d69bcbc89a9ee2812cc97667cc0c9109a7357971c0d43620cd949ea195c1affb23b754afa81438a56aad247e15d DIST amanda-3.3.9.tar.gz 4673301 SHA256 2520b95ca96f1d521d582b7c94bd631486e7029eda1de8e1887d74b323549a41 SHA512 345670a20cff335453e8dcbf457d1fcdb9f266e4a03d729c2b1ba762f4fac323de4a87713d0fd54c11ca244a08dc97fb8c641625f7fa81cb241b3c17748b1b7e WHIRLPOOL e149ab7dbc30cf3585e41d9fb338dd96ab4dd440e31723be51b8ccc9e5841f8dda31d3b89418474e31c7c2498f40177c646f03713c256a4d9341152e2ce2c8e4 DIST amanda-3.4.1.tar.gz 5338575 SHA256 1f69e9bdae774ac2394297dd9d7f98ccbce44ca9199317ada764ca173909d2ac SHA512 245bf334e36fe8b4361d9fc27ea7e7ef5bd2ecec74719caa16cc94d1ebb3abbef058e28d9afd85851654aaae0984531593a35c079d1ba4aed0fc5177e907ec16 WHIRLPOOL b9608456f28fb35137276f16ec24d79ae397a44450b42ec4fa28256763798dee623ab560ba0db147ff41d2abc57810e2318ae64741ea0a054a8ff853f4ad9c59 DIST amanda-3.4.2.tar.gz 5353734 SHA256 175c6a2ef57fe480ddeeefc920a93c8d1cde4111eec76d76e088101a53eeafac SHA512 dea44ffa5eb30318336395ccbd582df2f83da9a4cf91def2834a2e65b2e0f36cafc1911f6b73c3afb63be256484a78b006bdeb1db5b3ecf87dc59d34754987fd WHIRLPOOL af08e2b7b42cead569b69edfa264c1439d21d455e36ba5d346a74631e037773f20cd0563c6cdf95eeea0ee0e1e45328e553a5490ef4c66545acc1a3bd85570d0 diff --git a/app-backup/amanda/amanda-3.3.3-r1.ebuild b/app-backup/amanda/amanda-3.3.3-r1.ebuild deleted file mode 100644 index 375e15d4bcb..00000000000 --- a/app-backup/amanda/amanda-3.3.3-r1.ebuild +++ /dev/null @@ -1,477 +0,0 @@ -# Copyright 1999-2015 Gentoo Foundation -# Distributed under the terms of the GNU General Public License v2 - -EAPI=5 -inherit autotools eutils perl-module user systemd - -DESCRIPTION="The Advanced Maryland Automatic Network Disk Archiver" -HOMEPAGE="http://www.amanda.org/"; -SRC_URI="mirror://sourceforge/amanda/${P}.tar.gz" - -LICENSE="HPND BSD BSD-2 GPL-2+ GPL-3+" -SLOT="0" -IUSE="curl gnuplot ipv6 kerberos minimal nls readline s3 samba systemd xfs" - -KEYWORDS="~amd64 ~ppc ~ppc64 ~sparc ~x86" -RDEPEND="sys-libs/readline - virtual/awk - app-arch/tar - >=dev-lang/perl-5.6 - app-arch/dump - net-misc/openssh - >=dev-libs/glib-2.26.0 - nls? ( virtual/libintl ) - s3? ( >=net-misc/curl-7.10.0 ) - !s3? ( curl? ( >=net-misc/curl-7.10.0 ) ) - samba? ( net-fs/samba ) - kerberos? ( app-crypt/mit-krb5 ) - xfs? ( sys-fs/xfsdump ) - readline? ( sys-libs/readline ) - !minimal? ( - dev-perl/XML-Simple - virtual/mailx - app-arch/mt-st - sys-block/mtx - gnuplot? ( sci-visualization/gnuplot ) - app-crypt/aespipe - app-crypt/gnupg - )" - -DEPEND="${RDEPEND} - virtual/pkgconfig - nls? ( sys-devel/gettext ) - >=app-text/docbook-xsl-stylesheets-1.72.0 - app-text/docbook-xml-dtd - dev-libs/libxslt - " - -MYFILESDIR="${T}/files" -ENVDIR="/etc/env.d" -ENVDFILE="97amanda" -TMPENVFILE="${T}/${ENVDFILE}" - -# This is a complete list of Amanda settings that the ebuild takes from the -# build environment. This allows users to alter the behavior of the package as -# upstream intended, but keeping with Gentoo style. We store a copy of them in -# /etc/env.d/97amanda during the install, so that they are preserved for future -# installed. This variable name must not start with AMANDA_, as we do not want -# it captured into the env file. -ENV_SETTINGS_AMANDA=" -AMANDA_GROUP_GID AMANDA_GROUP_NAME -AMANDA_USER_NAME AMANDA_USER_UID AMANDA_USER_SH AMANDA_USER_HOMEDIR AMANDA_USER_GROUPS -AMANDA_SERVER AMANDA_SERVER_TAPE AMANDA_SERVER_INDEX -AMANDA_TAR_LISTDIR AMANDA_TAR -AMANDA_PORTS_UDP AMANDA_PORTS_TCP AMANDA_PORTS_BOTH AMANDA_PORTS -AMANDA_CONFIG_NAME AMANDA_TMPDIR" - -amanda_variable_setup() { - - # Setting vars - local currentamanda - - # Grab the current settings - currentamanda="$(set | egrep "^AMANDA_" | grep -v '^AMANDA_ENV_SETTINGS' | xargs)" - - # First we set the defaults - [ -z "${AMANDA_GROUP_GID}" ] && AMANDA_GROUP_GID=87 - [ -z "${AMANDA_GROUP_NAME}" ] && AMANDA_GROUP_NAME=amanda - [ -z "${AMANDA_USER_NAME}" ] && AMANDA_USER_NAME=amanda - [ -z "${AMANDA_USER_UID}" ] && AMANDA_USER_UID=87 - [ -z "${AMANDA_USER_SH}" ] && AMANDA_USER_SH=/bin/bash - [ -z "${AMANDA_USER_HOMEDIR}" ] && AMANDA_USER_HOMEDIR=/var/spool/amanda - [ -z "${AMANDA_USER_GROUPS}" ] && AMANDA_USER_GROUPS="${AMANDA_GROUP_NAME}" - - # This installs Amanda, with the server. However, it could be a client, - # just specify an alternate server name in AMANDA_SERVER. - [ -z "${AMANDA_SERVER}" ] && AMANDA_SERVER="${HOSTNAME}" - [ -z "${AMANDA_SERVER_TAPE}" ] && AMANDA_SERVER_TAPE="${AMANDA_SERVER}" - [ -z "${AMANDA_SERVER_INDEX}" ] && AMANDA_SERVER_INDEX="${AMANDA_SERVER}" - [ -z "${AMANDA_TAR_LISTDIR}" ] && AMANDA_TAR_LISTDIR=${AMANDA_USER_HOMEDIR}/tar-lists - [ -z "${AMANDA_CONFIG_NAME}" ] && AMANDA_CONFIG_NAME=DailySet1 - [ -z "${AMANDA_TMPDIR}" ] && AMANDA_TMPDIR=/var/tmp/amanda - [ -z "${AMANDA_DBGDIR}" ] && AMANDA_DBGDIR="$AMANDA_TMPDIR" - # These are left empty by default - [ -z "${AMANDA_PORTS_UDP}" ] && AMANDA_PORTS_UDP= - [ -z "${AMANDA_PORTS_TCP}" ] && AMANDA_PORTS_TCP= - [ -z "${AMANDA_PORTS_BOTH}" ] && AMANDA_PORTS_BOTH= - [ -z "${AMANDA_PORTS}" ] && AMANDA_PORTS= - - # What tar to use - [ -z "${AMANDA_TAR}" ] && AMANDA_TAR=/bin/tar - - # Now pull in the old stuff - if [ -f "${ROOT}${ENVDIR}/${ENVDFILE}" ]; then - # We don't just source it as we don't want everything in there. - eval $(egrep "^AMANDA_" "${ROOT}${ENVDIR}/${ENVDFILE}" | grep -v '^AMANDA_ENV_SETTINGS') - fi - - # Re-apply the new settings if any - [ -n "${currentamanda}" ] && eval `echo "${currentamanda}"` - -} - -pkg_setup() { - amanda_variable_setup - - # If USE=minimal, give out a warning, if AMANDA_SERVER is not set to - # another host than HOSTNAME. - if use minimal && [ "${AMANDA_SERVER}" = "${HOSTNAME}" ] ; then - elog "You are installing a client-only version of Amanda." - elog "You should set the variable \$AMANDA_SERVER to point at your" - elog "Amanda-tape-server, otherwise you will have to specify its name" - elog "when using amrecover on the client." - elog "For example: Use something like" - elog "AMANDA_SERVER=\"myserver\" emerge amanda" - elog - fi - - enewgroup "${AMANDA_GROUP_NAME}" "${AMANDA_GROUP_GID}" - enewuser "${AMANDA_USER_NAME}" "${AMANDA_USER_UID}" "${AMANDA_USER_SH}" "${AMANDA_USER_HOMEDIR}" "${AMANDA_USER_GROUPS}" -} - -src_unpack() { - # we do not want the perl src_unpack - default_src_unpack -} - -src_prepare() { - # gentoo bug #537248 - epatch "${FILESDIR}/local-amanda-perl5.20.patch" - - # gentoo bug #331111 - sed -i '/^check-local: check-perl$/d' "${S}"/config/automake/scripts.am - sed -i '/^check-local:/s,syntax-check,,g' "${S}"/perl/Makefile.am - - # bug with glibc-2.16.0 - sed -i -e '/gets is a security/d' "${S}"/gnulib/stdio.in.h - - eautoreconf - - # places for us to work in - mkdir -p "${MYFILESDIR}" - # Now we store the settings we just created - set | egrep "^AMANDA_" | grep -v '^AMANDA_ENV_SETTINGS' > "${TMPENVFILE}" - - # Prepare our custom files - einfo "Building custom configuration files" - local i # our iterator - local sedexpr # var for sed expr - sedexpr='' - for i in ${ENV_SETTINGS_AMANDA} ; do - local val - eval "val=\"\${${i}}\"" - sedexpr="${sedexpr}s|__${i}__|${val}|g;" - done - - # now apply the sed expr - for i in "${FILESDIR}"/amanda-* ; do - sed -re "${sedexpr}" <"${i}" >"${MYFILESDIR}/`basename ${i}`" - done - - ( - cat "${MYFILESDIR}"/amanda-amandahosts-client-2.5.1_p3-r1 - use minimal || cat "${MYFILESDIR}"/amanda-amandahosts-server-2.5.1_p3-r1 - ) > "${T}"/amandahosts - - if ! use minimal; then - sed -i -e 's:^\(my $amandahomedir\)=.*:\1 = $localstatedir;:' \ - server-src/am{addclient,serverconfig}.pl || die - fi -} - -src_configure() { - # fix bug #36316 - addpredict /var/cache/samba/gencache.tdb - # fix bug #376169 - addpredict /run/blkid - addpredict /etc/blkid.tab - - [ ! -f "${TMPENVFILE}" ] && die "Variable setting file (${TMPENVFILE}) should exist!" - source "${TMPENVFILE}" - local myconf - - einfo "Using ${AMANDA_SERVER_TAPE} for tape server." - myconf="${myconf} --with-tape-server=${AMANDA_SERVER_TAPE}" - einfo "Using ${AMANDA_SERVER_INDEX} for index server." - myconf="${myconf} --with-index-server=${AMANDA_SERVER_INDEX}" - einfo "Using ${AMANDA_USER_NAME} for amanda user." - myconf="${myconf} --with-user=${AMANDA_USER_NAME}" - einfo "Using ${AMANDA_GROUP_NAME} for amanda group." - myconf="${myconf} --with-group=${AMANDA_GROUP_NAME}" - einfo "Using ${AMANDA_TAR} as Tar implementation." - myconf="${myconf} --with-gnutar=${AMANDA_TAR}" - einfo "Using ${AMANDA_TAR_LISTDIR} as tar listdir." - myconf="${myconf} --with-gnutar-listdir=${AMANDA_TAR_LISTDIR}" - einfo "Using ${AMANDA_CONFIG_NAME} as default config name." - myconf="${myconf} --with-config=${AMANDA_CONFIG_NAME}" - einfo "Using ${AMANDA_TMPDIR} as Amanda temporary directory." - myconf="${myconf} --with-tmpdir=${AMANDA_TMPDIR}" - - if [ -n "${AMANDA_PORTS_UDP}" ] && [ -n "${AMANDA_PORTS_TCP}" ] && [ -z "${AMANDA_PORTS_BOTH}" ] ; then - eerror "If you want _both_ UDP and TCP ports, please use only the" - eerror "AMANDA_PORTS environment variable for identical ports, or set" - eerror "AMANDA_PORTS_BOTH." - die "Bad port setup!" - fi - if [ -n "${AMANDA_PORTS_UDP}" ]; then - einfo "Using UDP ports ${AMANDA_PORTS_UDP/,/-}" - myconf="${myconf} --with-udpportrange=${AMANDA_PORTS_UDP}" - fi - if [ -n "${AMANDA_PORTS_TCP}" ]; then - einfo "Using TCP ports ${AMANDA_PORTS_TCP/,/-}" - myconf="${myconf} --with-tcpportrange=${AMANDA_PORTS_TCP}" - fi - if [ -n "${AMANDA_PORTS}" ]; then - einfo "Using ports ${AMANDA_PORTS/,/-}" - myconf="${myconf} --with-portrange=${AMANDA_PORTS}" - fi - - # Extras - # Speed option - myconf="${myconf} --with-buffered-dump" - # "debugging" in the configuration is NOT debug in the conventional sense. - # It is actually just useful output in the application, and should remain - # enabled. There are some cases of breakage with MTX tape changers as of - # 2.5.1p2 that it exposes when turned off as well. - myconf="${myconf} --with-debugging" - # Where to put our files - myconf="${myconf} --localstatedir=${AMANDA_USER_HOMEDIR}" - - # Samba support - myconf="${myconf} `use_with samba smbclient /usr/bin/smbclient`" - - # Support for BSD, SSH, BSDUDP, BSDTCP security methods all compiled in by - # default - myconf="${myconf} --with-bsd-security" - myconf="${myconf} --with-ssh-security" - myconf="${myconf} --with-bsdudp-security" - myconf="${myconf} --with-bsdtcp-security" - - # kerberos-security mechanism version 5 - myconf="${myconf} `use_with kerberos krb5-security`" - - # Amazon S3 support - myconf="${myconf} `use_enable s3 s3-device`" - - # libcurl is required for S3 but otherwise optional - if ! use s3; then - myconf="${myconf} $(use_with curl libcurl)" - fi - - # Client only, as requested in bug #127725 - if use minimal ; then - myconf="${myconf} --without-server" - else - # amplot - myconf="${myconf} $(use_with gnuplot)" - fi - - # IPv6 fun. - myconf="${myconf} `use_with ipv6`" - # This is to prevent the IPv6-is-working test - # As the test fails on binpkg build hosts with no IPv6. - use ipv6 && export amanda_cv_working_ipv6=yes - - # I18N - myconf="${myconf} `use_enable nls`" - - # Bug #296634: Perl location - perl_set_version - myconf="${myconf} --with-amperldir=${VENDOR_LIB}" - - # Bug 296633: --disable-syntax-checks - # Some tests are not safe for production systems - myconf="${myconf} --disable-syntax-checks" - - # build manpages - myconf="${myconf} --enable-manpage-build" - - # bug #483120 - tc-export AR - - econf \ - $(use_with readline) \ - ${myconf} -} - -src_compile() { - # Again, do not want the perl-module src_compile - default_src_compile -} - -src_install() { - [ ! -f "${TMPENVFILE}" ] && die "Variable setting file (${TMPENVFILE}) should exist!" - source ${TMPENVFILE} - - einfo "Doing stock install" - emake DESTDIR="${D}" install || die - - # Build the envdir file - # Don't forget this.. - einfo "Building environment file" - ( - echo "# These settings are what was present in the environment when this" - echo "# Amanda was compiled. Changing anything below this comment will" - echo "# have no effect on your application, but it merely exists to" - echo "# preserve them for your next emerge of Amanda" - cat "${TMPENVFILE}" | sed "s,=\$,='',g" - ) >> "${MYFILESDIR}/${ENVDFILE}" - - # Env.d - einfo "Installing environment config file" - doenvd "${MYFILESDIR}/${ENVDFILE}" - - # Lock down next section (up until docs). - insopts -m0640 - # Installing Amanda Xinetd Services Definition - einfo "Installing xinetd service file" - insinto /etc/xinetd.d - if use minimal ; then - newins "${MYFILESDIR}"/amanda-xinetd-2.6.1_p1-client amanda - else - newins "${MYFILESDIR}"/amanda-xinetd-2.6.1_p1-server amanda - fi - - if ! use minimal; then - einfo "Installing Sample Daily Cron Job for Amanda" - insinto /etc/cron.daily - newins "${MYFILESDIR}/amanda-cron" amanda - fi - - einfo "Installing systemd service and socket files for Amanda" - systemd_dounit "${FILESDIR}"/amanda.socket || die - systemd_newunit "${FILESDIR}"/amanda.service-r1 '[email protected]' || die - - insinto /etc/amanda - einfo "Installing .amandahosts File for ${AMANDA_USER_NAME} user" - doins "${T}/amandahosts" - fperms 600 /etc/amanda/amandahosts - - dosym /etc/amanda/amandahosts "${AMANDA_USER_HOMEDIR}/.amandahosts" - insinto "${AMANDA_USER_HOMEDIR}" - einfo "Installing .profile for ${AMANDA_USER_NAME} user" - newins "${MYFILESDIR}/amanda-profile" .profile - - insinto /etc/amanda - doins "${S}/example/amanda-client.conf" - if ! use minimal ; then - insinto "/etc/amanda/${AMANDA_CONFIG_NAME}" - doins "${S}/example/amanda.conf" - doins "${S}/example/disklist" - keepdir "${AMANDA_USER_HOMEDIR}/${AMANDA_CONFIG_NAME}/index" - fi - - keepdir "${AMANDA_TAR_LISTDIR}" - keepdir "${AMANDA_USER_HOMEDIR}/amanda" - keepdir "${AMANDA_TMPDIR}/dumps" - # Just make sure it exists for XFS to work... - use xfs && keepdir /var/xfsdump/inventory - - local i - for i in "${AMANDA_USER_HOMEDIR}" "${AMANDA_TAR_LISTDIR}" \ - "${AMANDA_TMPDIR}" /etc/amanda; do - einfo "Securing directory (${i})" - fowners -R ${AMANDA_USER_NAME}:${AMANDA_GROUP_NAME} ${i} - done - # Do NOT use -R - fperms 0700 \ - "${AMANDA_USER_HOMEDIR}" "${AMANDA_TAR_LISTDIR}" \ - "${AMANDA_TMPDIR}" "${AMANDA_TMPDIR}/dumps" \ - "${AMANDA_USER_HOMEDIR}/amanda" \ - /etc/amanda - - if ! use minimal ; then - fperms 0700 \ - "${AMANDA_USER_HOMEDIR}/${AMANDA_CONFIG_NAME}" \ - /etc/amanda/${AMANDA_CONFIG_NAME} - fi - - einfo "Setting setuid permissions" - amanda_permissions_fix "${D}" - - # Relax permissions again - insopts -m0644 - - # docs - einfo "Installing documentation" - dodoc AUTHORS ChangeLog DEVELOPING NEWS README ReleaseNotes UPGRADING - # our inetd sample - einfo "Installing standard inetd sample" - newdoc "${MYFILESDIR}/amanda-inetd.amanda.sample-2.6.0_p2-r2" amanda-inetd.amanda.sample - # Amanda example configs - einfo "Installing example configurations" - rm "${D}"/usr/share/amanda/{COPYRIGHT,ChangeLog,NEWS,ReleaseNotes} - mv "${D}/usr/share/amanda/example" "${D}/usr/share/doc/${PF}/" - docinto example1 - newdoc "${FILESDIR}/example_amanda.conf" amanda.conf - newdoc "${FILESDIR}/example_disklist-2.5.1_p3-r1" disklist - newdoc "${FILESDIR}/example_global.conf" global.conf - - einfo "Cleaning up dud .la files" - perl_set_version - find "${D}"/"${VENDOR_LIB}" -name '*.la' -print0 |xargs -0 rm -f -} - -pkg_postinst() { - [ ! -f "${TMPENVFILE}" -a "$MERGE_TYPE" == "binary" ] && \ - TMPENVFILE="${ROOT}${ENVDIR}/${ENVDFILE}" - [ ! -f "${TMPENVFILE}" ] && die "Variable setting file (${TMPENVFILE}) should exist!" - source "${TMPENVFILE}" - - # Migration of amandates from /etc to $localstatedir/amanda - if [ -f "${ROOT}/etc/amandates" -a \ - ! -f "${ROOT}/${AMANDA_USER_HOMEDIR}/amanda/amandates" ]; then - einfo "Migrating amandates from /etc/ to ${AMANDA_USER_HOMEDIR}/amanda" - einfo "A backup is also placed at /etc/amandates.orig" - cp -dp "${ROOT}/etc/amandates" "${ROOT}/etc/amandates.orig" - mkdir -p "${ROOT}/${AMANDA_USER_HOMEDIR}/amanda/" - cp -dp "${ROOT}/etc/amandates" "${ROOT}/${AMANDA_USER_HOMEDIR}/amanda/amandates" - fi - if [ -f "${ROOT}/etc/amandates" ]; then - einfo "If you have migrated safely, please delete /etc/amandates" - fi - - einfo "Checking setuid permissions" - amanda_permissions_fix "${ROOT}" - - elog "You should configure Amanda in /etc/amanda now." - elog - elog "If you use xinetd, Don't forget to check /etc/xinetd.d/amanda" - elog "and restart xinetd afterwards!" - elog - elog "Otherwise, please look at /usr/share/doc/${PF}/inetd.amanda.sample" - elog "as an example of how to configure your inetd." - elog - elog "systemd-users: enable and start amanda.socket or the relevant services" - elog "regarding what auth method you use." - elog - elog "NOTICE: If you need raw access to partitions you need to add the" - elog "amanda user to the 'disk' group." - elog - elog "NOTICE: If you have a tape changer, you need to add the amanda user" - elog "to the 'tape' group." - elog - elog "If you use localhost in your disklist your restores may break." - elog "You should replace it with the actual hostname!" - elog "Please also see the syntax changes to amandahosts." - elog - elog "Please note that this package no longer explicitly depends on" - elog "virtual/inetd, as it supports modes where an inetd is not needed" - elog "(see bug #506028 for details)." - elog "The only exception is when you use the authentication method 'local'." -} - -# We have had reports of amanda file permissions getting screwed up. -# Losing setuid, becoming too lax etc. -# ONLY root and users in the amanda group should be able to run these binaries! -amanda_permissions_fix() { - local root="$1" - [ -z "${root}" ] && die "Failed to pass root argument to amanda_permissions_fix!" - local le="/usr/libexec/amanda" - for i in /usr/sbin/amcheck "${le}"/calcsize "${le}"/killpgrp \ - "${le}"/rundump "${le}"/runtar "${le}"/dumper \ - "${le}"/planner ; do - chown root:${AMANDA_GROUP_NAME} "${root}"/${i} - chmod u=srwx,g=rx,o= "${root}"/${i} - done -} diff --git a/app-backup/amanda/amanda-3.3.3.ebuild b/app-backup/amanda/amanda-3.3.3.ebuild deleted file mode 100644 index a0615c70412..00000000000 --- a/app-backup/amanda/amanda-3.3.3.ebuild +++ /dev/null @@ -1,468 +0,0 @@ -# Copyright 1999-2014 Gentoo Foundation -# Distributed under the terms of the GNU General Public License v2 - -EAPI=5 -inherit autotools eutils perl-module user systemd - -DESCRIPTION="The Advanced Maryland Automatic Network Disk Archiver" -HOMEPAGE="http://www.amanda.org/"; -SRC_URI="mirror://sourceforge/amanda/${P}.tar.gz" -LICENSE="HPND BSD BSD-2 GPL-2+ GPL-3+" -SLOT="0" -KEYWORDS="amd64 ppc ppc64 ~sparc x86" -RDEPEND="sys-libs/readline - virtual/awk - app-arch/tar - >=dev-lang/perl-5.6 - app-arch/dump - net-misc/openssh - >=dev-libs/glib-2.26.0 - nls? ( virtual/libintl ) - s3? ( >=net-misc/curl-7.10.0 ) - !s3? ( curl? ( >=net-misc/curl-7.10.0 ) ) - samba? ( net-fs/samba ) - kerberos? ( app-crypt/mit-krb5 ) - xfs? ( sys-fs/xfsdump ) - readline? ( sys-libs/readline ) - !minimal? ( - dev-perl/XML-Simple - virtual/mailx - app-arch/mt-st - sys-block/mtx - gnuplot? ( sci-visualization/gnuplot ) - app-crypt/aespipe - app-crypt/gnupg - )" - -DEPEND="${RDEPEND} - virtual/pkgconfig - nls? ( sys-devel/gettext ) - >=app-text/docbook-xsl-stylesheets-1.72.0 - app-text/docbook-xml-dtd - dev-libs/libxslt - " - -IUSE="curl gnuplot ipv6 kerberos minimal nls readline s3 samba systemd xfs" - -MYFILESDIR="${T}/files" -ENVDIR="/etc/env.d" -ENVDFILE="97amanda" -TMPENVFILE="${T}/${ENVDFILE}" - -# This is a complete list of Amanda settings that the ebuild takes from the -# build environment. This allows users to alter the behavior of the package as -# upstream intended, but keeping with Gentoo style. We store a copy of them in -# /etc/env.d/97amanda during the install, so that they are preserved for future -# installed. This variable name must not start with AMANDA_, as we do not want -# it captured into the env file. -ENV_SETTINGS_AMANDA=" -AMANDA_GROUP_GID AMANDA_GROUP_NAME -AMANDA_USER_NAME AMANDA_USER_UID AMANDA_USER_SH AMANDA_USER_HOMEDIR AMANDA_USER_GROUPS -AMANDA_SERVER AMANDA_SERVER_TAPE AMANDA_SERVER_INDEX -AMANDA_TAR_LISTDIR AMANDA_TAR -AMANDA_PORTS_UDP AMANDA_PORTS_TCP AMANDA_PORTS_BOTH AMANDA_PORTS -AMANDA_CONFIG_NAME AMANDA_TMPDIR" - -amanda_variable_setup() { - - # Setting vars - local currentamanda - - # Grab the current settings - currentamanda="$(set | egrep "^AMANDA_" | grep -v '^AMANDA_ENV_SETTINGS' | xargs)" - - # First we set the defaults - [ -z "${AMANDA_GROUP_GID}" ] && AMANDA_GROUP_GID=87 - [ -z "${AMANDA_GROUP_NAME}" ] && AMANDA_GROUP_NAME=amanda - [ -z "${AMANDA_USER_NAME}" ] && AMANDA_USER_NAME=amanda - [ -z "${AMANDA_USER_UID}" ] && AMANDA_USER_UID=87 - [ -z "${AMANDA_USER_SH}" ] && AMANDA_USER_SH=/bin/bash - [ -z "${AMANDA_USER_HOMEDIR}" ] && AMANDA_USER_HOMEDIR=/var/spool/amanda - [ -z "${AMANDA_USER_GROUPS}" ] && AMANDA_USER_GROUPS="${AMANDA_GROUP_NAME}" - - # This installs Amanda, with the server. However, it could be a client, - # just specify an alternate server name in AMANDA_SERVER. - [ -z "${AMANDA_SERVER}" ] && AMANDA_SERVER="${HOSTNAME}" - [ -z "${AMANDA_SERVER_TAPE}" ] && AMANDA_SERVER_TAPE="${AMANDA_SERVER}" - [ -z "${AMANDA_SERVER_INDEX}" ] && AMANDA_SERVER_INDEX="${AMANDA_SERVER}" - [ -z "${AMANDA_TAR_LISTDIR}" ] && AMANDA_TAR_LISTDIR=${AMANDA_USER_HOMEDIR}/tar-lists - [ -z "${AMANDA_CONFIG_NAME}" ] && AMANDA_CONFIG_NAME=DailySet1 - [ -z "${AMANDA_TMPDIR}" ] && AMANDA_TMPDIR=/var/tmp/amanda - [ -z "${AMANDA_DBGDIR}" ] && AMANDA_DBGDIR="$AMANDA_TMPDIR" - # These are left empty by default - [ -z "${AMANDA_PORTS_UDP}" ] && AMANDA_PORTS_UDP= - [ -z "${AMANDA_PORTS_TCP}" ] && AMANDA_PORTS_TCP= - [ -z "${AMANDA_PORTS_BOTH}" ] && AMANDA_PORTS_BOTH= - [ -z "${AMANDA_PORTS}" ] && AMANDA_PORTS= - - # What tar to use - [ -z "${AMANDA_TAR}" ] && AMANDA_TAR=/bin/tar - - # Now pull in the old stuff - if [ -f "${ROOT}${ENVDIR}/${ENVDFILE}" ]; then - # We don't just source it as we don't want everything in there. - eval $(egrep "^AMANDA_" "${ROOT}${ENVDIR}/${ENVDFILE}" | grep -v '^AMANDA_ENV_SETTINGS') - fi - - # Re-apply the new settings if any - [ -n "${currentamanda}" ] && eval `echo "${currentamanda}"` - -} - -pkg_setup() { - amanda_variable_setup - - # If USE=minimal, give out a warning, if AMANDA_SERVER is not set to - # another host than HOSTNAME. - if use minimal && [ "${AMANDA_SERVER}" = "${HOSTNAME}" ] ; then - elog "You are installing a client-only version of Amanda." - elog "You should set the variable \$AMANDA_SERVER to point at your" - elog "Amanda-tape-server, otherwise you will have to specify its name" - elog "when using amrecover on the client." - elog "For example: Use something like" - elog "AMANDA_SERVER=\"myserver\" emerge amanda" - elog - fi - - enewgroup "${AMANDA_GROUP_NAME}" "${AMANDA_GROUP_GID}" - enewuser "${AMANDA_USER_NAME}" "${AMANDA_USER_UID}" "${AMANDA_USER_SH}" "${AMANDA_USER_HOMEDIR}" "${AMANDA_USER_GROUPS}" -} - -src_unpack() { - # we do not want the perl src_unpack - default_src_unpack -} - -src_prepare() { - - # gentoo bug #331111 - sed -i '/^check-local: check-perl$/d' "${S}"/config/automake/scripts.am - sed -i '/^check-local:/s,syntax-check,,g' "${S}"/perl/Makefile.am - - # bug with glibc-2.16.0 - sed -i -e '/gets is a security/d' "${S}"/gnulib/stdio.in.h - - eautoreconf - - # places for us to work in - mkdir -p "${MYFILESDIR}" - # Now we store the settings we just created - set | egrep "^AMANDA_" | grep -v '^AMANDA_ENV_SETTINGS' > "${TMPENVFILE}" - - # Prepare our custom files - einfo "Building custom configuration files" - local i # our iterator - local sedexpr # var for sed expr - sedexpr='' - for i in ${ENV_SETTINGS_AMANDA} ; do - local val - eval "val=\"\${${i}}\"" - sedexpr="${sedexpr}s|__${i}__|${val}|g;" - done - - # now apply the sed expr - for i in "${FILESDIR}"/amanda-* ; do - sed -re "${sedexpr}" <"${i}" >"${MYFILESDIR}/`basename ${i}`" - done - - ( - cat "${MYFILESDIR}"/amanda-amandahosts-client-2.5.1_p3-r1 - use minimal || cat "${MYFILESDIR}"/amanda-amandahosts-server-2.5.1_p3-r1 - ) > "${T}"/amandahosts - - if ! use minimal; then - sed -i -e 's:^\(my $amandahomedir\)=.*:\1 = $localstatedir;:' \ - server-src/am{addclient,serverconfig}.pl || die - fi -} - -src_configure() { - # fix bug #36316 - addpredict /var/cache/samba/gencache.tdb - # fix bug #376169 - addpredict /run/blkid - addpredict /etc/blkid.tab - - [ ! -f "${TMPENVFILE}" ] && die "Variable setting file (${TMPENVFILE}) should exist!" - source "${TMPENVFILE}" - local myconf - - einfo "Using ${AMANDA_SERVER_TAPE} for tape server." - myconf="${myconf} --with-tape-server=${AMANDA_SERVER_TAPE}" - einfo "Using ${AMANDA_SERVER_INDEX} for index server." - myconf="${myconf} --with-index-server=${AMANDA_SERVER_INDEX}" - einfo "Using ${AMANDA_USER_NAME} for amanda user." - myconf="${myconf} --with-user=${AMANDA_USER_NAME}" - einfo "Using ${AMANDA_GROUP_NAME} for amanda group." - myconf="${myconf} --with-group=${AMANDA_GROUP_NAME}" - einfo "Using ${AMANDA_TAR} as Tar implementation." - myconf="${myconf} --with-gnutar=${AMANDA_TAR}" - einfo "Using ${AMANDA_TAR_LISTDIR} as tar listdir." - myconf="${myconf} --with-gnutar-listdir=${AMANDA_TAR_LISTDIR}" - einfo "Using ${AMANDA_CONFIG_NAME} as default config name." - myconf="${myconf} --with-config=${AMANDA_CONFIG_NAME}" - einfo "Using ${AMANDA_TMPDIR} as Amanda temporary directory." - myconf="${myconf} --with-tmpdir=${AMANDA_TMPDIR}" - - if [ -n "${AMANDA_PORTS_UDP}" ] && [ -n "${AMANDA_PORTS_TCP}" ] && [ -z "${AMANDA_PORTS_BOTH}" ] ; then - eerror "If you want _both_ UDP and TCP ports, please use only the" - eerror "AMANDA_PORTS environment variable for identical ports, or set" - eerror "AMANDA_PORTS_BOTH." - die "Bad port setup!" - fi - if [ -n "${AMANDA_PORTS_UDP}" ]; then - einfo "Using UDP ports ${AMANDA_PORTS_UDP/,/-}" - myconf="${myconf} --with-udpportrange=${AMANDA_PORTS_UDP}" - fi - if [ -n "${AMANDA_PORTS_TCP}" ]; then - einfo "Using TCP ports ${AMANDA_PORTS_TCP/,/-}" - myconf="${myconf} --with-tcpportrange=${AMANDA_PORTS_TCP}" - fi - if [ -n "${AMANDA_PORTS}" ]; then - einfo "Using ports ${AMANDA_PORTS/,/-}" - myconf="${myconf} --with-portrange=${AMANDA_PORTS}" - fi - - # Extras - # Speed option - myconf="${myconf} --with-buffered-dump" - # "debugging" in the configuration is NOT debug in the conventional sense. - # It is actually just useful output in the application, and should remain - # enabled. There are some cases of breakage with MTX tape changers as of - # 2.5.1p2 that it exposes when turned off as well. - myconf="${myconf} --with-debugging" - # Where to put our files - myconf="${myconf} --localstatedir=${AMANDA_USER_HOMEDIR}" - - # Samba support - myconf="${myconf} `use_with samba smbclient /usr/bin/smbclient`" - - # Support for BSD, SSH, BSDUDP, BSDTCP security methods all compiled in by - # default - myconf="${myconf} --with-bsd-security" - myconf="${myconf} --with-ssh-security" - myconf="${myconf} --with-bsdudp-security" - myconf="${myconf} --with-bsdtcp-security" - - # kerberos-security mechanism version 5 - myconf="${myconf} `use_with kerberos krb5-security`" - - # Amazon S3 support - myconf="${myconf} `use_enable s3 s3-device`" - - # libcurl is required for S3 but otherwise optional - if ! use s3; then - myconf="${myconf} $(use_with curl libcurl)" - fi - - # Client only, as requested in bug #127725 - if use minimal ; then - myconf="${myconf} --without-server" - else - # amplot - myconf="${myconf} $(use_with gnuplot)" - fi - - # IPv6 fun. - myconf="${myconf} `use_with ipv6`" - # This is to prevent the IPv6-is-working test - # As the test fails on binpkg build hosts with no IPv6. - use ipv6 && export amanda_cv_working_ipv6=yes - - # I18N - myconf="${myconf} `use_enable nls`" - - # Bug #296634: Perl location - perl_set_version - myconf="${myconf} --with-amperldir=${VENDOR_LIB}" - - # Bug 296633: --disable-syntax-checks - # Some tests are not safe for production systems - myconf="${myconf} --disable-syntax-checks" - - # build manpages - myconf="${myconf} --enable-manpage-build" - - econf \ - $(use_with readline) \ - ${myconf} -} - -src_compile() { - # Again, do not want the perl-module src_compile - default_src_compile -} - -src_install() { - [ ! -f "${TMPENVFILE}" ] && die "Variable setting file (${TMPENVFILE}) should exist!" - source ${TMPENVFILE} - - einfo "Doing stock install" - emake DESTDIR="${D}" install || die - - # Build the envdir file - # Don't forget this.. - einfo "Building environment file" - ( - echo "# These settings are what was present in the environment when this" - echo "# Amanda was compiled. Changing anything below this comment will" - echo "# have no effect on your application, but it merely exists to" - echo "# preserve them for your next emerge of Amanda" - cat "${TMPENVFILE}" | sed "s,=\$,='',g" - ) >> "${MYFILESDIR}/${ENVDFILE}" - - # Env.d - einfo "Installing environment config file" - doenvd "${MYFILESDIR}/${ENVDFILE}" - - # Lock down next section (up until docs). - insopts -m0640 - # Installing Amanda Xinetd Services Definition - einfo "Installing xinetd service file" - insinto /etc/xinetd.d - if use minimal ; then - newins "${MYFILESDIR}"/amanda-xinetd-2.6.1_p1-client amanda - else - newins "${MYFILESDIR}"/amanda-xinetd-2.6.1_p1-server amanda - fi - - if ! use minimal; then - einfo "Installing Sample Daily Cron Job for Amanda" - insinto /etc/cron.daily - newins "${MYFILESDIR}/amanda-cron" amanda - fi - - einfo "Installing systemd service and socket files for Amanda" - systemd_dounit "${FILESDIR}"/amanda.socket || die - systemd_newunit "${FILESDIR}"/amanda.service '[email protected]' || die - - insinto /etc/amanda - einfo "Installing .amandahosts File for ${AMANDA_USER_NAME} user" - doins "${T}/amandahosts" - fperms 600 /etc/amanda/amandahosts - - dosym /etc/amanda/amandahosts "${AMANDA_USER_HOMEDIR}/.amandahosts" - insinto "${AMANDA_USER_HOMEDIR}" - einfo "Installing .profile for ${AMANDA_USER_NAME} user" - newins "${MYFILESDIR}/amanda-profile" .profile - - insinto /etc/amanda - doins "${S}/example/amanda-client.conf" - if ! use minimal ; then - insinto "/etc/amanda/${AMANDA_CONFIG_NAME}" - doins "${S}/example/amanda.conf" - doins "${S}/example/disklist" - keepdir "${AMANDA_USER_HOMEDIR}/${AMANDA_CONFIG_NAME}/index" - fi - - keepdir "${AMANDA_TAR_LISTDIR}" - keepdir "${AMANDA_USER_HOMEDIR}/amanda" - keepdir "${AMANDA_TMPDIR}/dumps" - # Just make sure it exists for XFS to work... - use xfs && keepdir /var/xfsdump/inventory - - local i - for i in "${AMANDA_USER_HOMEDIR}" "${AMANDA_TAR_LISTDIR}" \ - "${AMANDA_TMPDIR}" /etc/amanda; do - einfo "Securing directory (${i})" - fowners -R ${AMANDA_USER_NAME}:${AMANDA_GROUP_NAME} ${i} - done - # Do NOT use -R - fperms 0700 \ - "${AMANDA_USER_HOMEDIR}" "${AMANDA_TAR_LISTDIR}" \ - "${AMANDA_TMPDIR}" "${AMANDA_TMPDIR}/dumps" \ - "${AMANDA_USER_HOMEDIR}/amanda" \ - /etc/amanda - - if ! use minimal ; then - fperms 0700 \ - "${AMANDA_USER_HOMEDIR}/${AMANDA_CONFIG_NAME}" \ - /etc/amanda/${AMANDA_CONFIG_NAME} - fi - - einfo "Setting setuid permissions" - amanda_permissions_fix "${D}" - - # Relax permissions again - insopts -m0644 - - # docs - einfo "Installing documentation" - dodoc AUTHORS ChangeLog DEVELOPING NEWS README ReleaseNotes UPGRADING - # our inetd sample - einfo "Installing standard inetd sample" - newdoc "${MYFILESDIR}/amanda-inetd.amanda.sample-2.6.0_p2-r2" amanda-inetd.amanda.sample - # Amanda example configs - einfo "Installing example configurations" - rm "${D}"/usr/share/amanda/{COPYRIGHT,ChangeLog,NEWS,ReleaseNotes} - mv "${D}/usr/share/amanda/example" "${D}/usr/share/doc/${PF}/" - docinto example1 - newdoc "${FILESDIR}/example_amanda.conf" amanda.conf - newdoc "${FILESDIR}/example_disklist-2.5.1_p3-r1" disklist - newdoc "${FILESDIR}/example_global.conf" global.conf - - einfo "Cleaning up dud .la files" - perl_set_version - find "${D}"/"${VENDOR_LIB}" -name '*.la' -print0 |xargs -0 rm -f -} - -pkg_postinst() { - [ ! -f "${TMPENVFILE}" -a "$MERGE_TYPE" == "binary" ] && \ - TMPENVFILE="${ROOT}${ENVDIR}/${ENVDFILE}" - [ ! -f "${TMPENVFILE}" ] && die "Variable setting file (${TMPENVFILE}) should exist!" - source "${TMPENVFILE}" - - # Migration of amandates from /etc to $localstatedir/amanda - if [ -f "${ROOT}/etc/amandates" -a \ - ! -f "${ROOT}/${AMANDA_USER_HOMEDIR}/amanda/amandates" ]; then - einfo "Migrating amandates from /etc/ to ${AMANDA_USER_HOMEDIR}/amanda" - einfo "A backup is also placed at /etc/amandates.orig" - cp -dp "${ROOT}/etc/amandates" "${ROOT}/etc/amandates.orig" - mkdir -p "${ROOT}/${AMANDA_USER_HOMEDIR}/amanda/" - cp -dp "${ROOT}/etc/amandates" "${ROOT}/${AMANDA_USER_HOMEDIR}/amanda/amandates" - fi - if [ -f "${ROOT}/etc/amandates" ]; then - einfo "If you have migrated safely, please delete /etc/amandates" - fi - - einfo "Checking setuid permissions" - amanda_permissions_fix "${ROOT}" - - elog "You should configure Amanda in /etc/amanda now." - elog - elog "If you use xinetd, Don't forget to check /etc/xinetd.d/amanda" - elog "and restart xinetd afterwards!" - elog - elog "Otherwise, please look at /usr/share/doc/${PF}/inetd.amanda.sample" - elog "as an example of how to configure your inetd." - elog - elog "NOTICE: If you need raw access to partitions you need to add the" - elog "amanda user to the 'disk' group." - elog - elog "NOTICE: If you have a tape changer, you need to add the amanda user" - elog "to the 'tape' group." - elog - elog "If you use localhost in your disklist your restores may break." - elog "You should replace it with the actual hostname!" - elog "Please also see the syntax changes to amandahosts." - elog - elog "Please note that this package no longer explicitly depends on" - elog "virtual/inetd, as it supports modes where an inetd is not needed" - elog "(see bug #506028 for details)." - -} - -# We have had reports of amanda file permissions getting screwed up. -# Losing setuid, becoming too lax etc. -# ONLY root and users in the amanda group should be able to run these binaries! -amanda_permissions_fix() { - local root="$1" - [ -z "${root}" ] && die "Failed to pass root argument to amanda_permissions_fix!" - local le="/usr/libexec/amanda" - for i in /usr/sbin/amcheck "${le}"/calcsize "${le}"/killpgrp \ - "${le}"/rundump "${le}"/runtar "${le}"/dumper \ - "${le}"/planner ; do - chown root:${AMANDA_GROUP_NAME} "${root}"/${i} - chmod u=srwx,g=rx,o= "${root}"/${i} - done -} diff --git a/app-backup/amanda/amanda-3.3.5.ebuild b/app-backup/amanda/amanda-3.3.5.ebuild deleted file mode 100644 index 02ad41d9591..00000000000 --- a/app-backup/amanda/amanda-3.3.5.ebuild +++ /dev/null @@ -1,477 +0,0 @@ -# Copyright 1999-2015 Gentoo Foundation -# Distributed under the terms of the GNU General Public License v2 - -EAPI=5 -inherit autotools eutils perl-module user systemd - -DESCRIPTION="The Advanced Maryland Automatic Network Disk Archiver" -HOMEPAGE="http://www.amanda.org/"; -SRC_URI="mirror://sourceforge/amanda/${P}.tar.gz" - -LICENSE="HPND BSD BSD-2 GPL-2+ GPL-3+" -SLOT="0" -IUSE="curl gnuplot ipv6 kerberos minimal nls readline s3 samba systemd xfs" - -KEYWORDS="~amd64 ~ppc ~ppc64 ~sparc ~x86" -RDEPEND="sys-libs/readline - virtual/awk - app-arch/tar - dev-lang/perl:= - app-arch/dump - net-misc/openssh - >=dev-libs/glib-2.26.0 - nls? ( virtual/libintl ) - s3? ( >=net-misc/curl-7.10.0 ) - !s3? ( curl? ( >=net-misc/curl-7.10.0 ) ) - samba? ( net-fs/samba ) - kerberos? ( app-crypt/mit-krb5 ) - xfs? ( sys-fs/xfsdump ) - readline? ( sys-libs/readline ) - !minimal? ( - dev-perl/XML-Simple - virtual/mailx - app-arch/mt-st - sys-block/mtx - gnuplot? ( sci-visualization/gnuplot ) - app-crypt/aespipe - app-crypt/gnupg - )" - -DEPEND="${RDEPEND} - virtual/pkgconfig - nls? ( sys-devel/gettext ) - >=app-text/docbook-xsl-stylesheets-1.72.0 - app-text/docbook-xml-dtd - dev-libs/libxslt - " - -MYFILESDIR="${T}/files" -ENVDIR="/etc/env.d" -ENVDFILE="97amanda" -TMPENVFILE="${T}/${ENVDFILE}" - -# This is a complete list of Amanda settings that the ebuild takes from the -# build environment. This allows users to alter the behavior of the package as -# upstream intended, but keeping with Gentoo style. We store a copy of them in -# /etc/env.d/97amanda during the install, so that they are preserved for future -# installed. This variable name must not start with AMANDA_, as we do not want -# it captured into the env file. -ENV_SETTINGS_AMANDA=" -AMANDA_GROUP_GID AMANDA_GROUP_NAME -AMANDA_USER_NAME AMANDA_USER_UID AMANDA_USER_SH AMANDA_USER_HOMEDIR AMANDA_USER_GROUPS -AMANDA_SERVER AMANDA_SERVER_TAPE AMANDA_SERVER_INDEX -AMANDA_TAR_LISTDIR AMANDA_TAR -AMANDA_PORTS_UDP AMANDA_PORTS_TCP AMANDA_PORTS_BOTH AMANDA_PORTS -AMANDA_CONFIG_NAME AMANDA_TMPDIR" - -amanda_variable_setup() { - - # Setting vars - local currentamanda - - # Grab the current settings - currentamanda="$(set | egrep "^AMANDA_" | grep -v '^AMANDA_ENV_SETTINGS' | xargs)" - - # First we set the defaults - [ -z "${AMANDA_GROUP_GID}" ] && AMANDA_GROUP_GID=87 - [ -z "${AMANDA_GROUP_NAME}" ] && AMANDA_GROUP_NAME=amanda - [ -z "${AMANDA_USER_NAME}" ] && AMANDA_USER_NAME=amanda - [ -z "${AMANDA_USER_UID}" ] && AMANDA_USER_UID=87 - [ -z "${AMANDA_USER_SH}" ] && AMANDA_USER_SH=/bin/bash - [ -z "${AMANDA_USER_HOMEDIR}" ] && AMANDA_USER_HOMEDIR=/var/spool/amanda - [ -z "${AMANDA_USER_GROUPS}" ] && AMANDA_USER_GROUPS="${AMANDA_GROUP_NAME}" - - # This installs Amanda, with the server. However, it could be a client, - # just specify an alternate server name in AMANDA_SERVER. - [ -z "${AMANDA_SERVER}" ] && AMANDA_SERVER="${HOSTNAME}" - [ -z "${AMANDA_SERVER_TAPE}" ] && AMANDA_SERVER_TAPE="${AMANDA_SERVER}" - [ -z "${AMANDA_SERVER_INDEX}" ] && AMANDA_SERVER_INDEX="${AMANDA_SERVER}" - [ -z "${AMANDA_TAR_LISTDIR}" ] && AMANDA_TAR_LISTDIR=${AMANDA_USER_HOMEDIR}/tar-lists - [ -z "${AMANDA_CONFIG_NAME}" ] && AMANDA_CONFIG_NAME=DailySet1 - [ -z "${AMANDA_TMPDIR}" ] && AMANDA_TMPDIR=/var/tmp/amanda - [ -z "${AMANDA_DBGDIR}" ] && AMANDA_DBGDIR="$AMANDA_TMPDIR" - # These are left empty by default - [ -z "${AMANDA_PORTS_UDP}" ] && AMANDA_PORTS_UDP= - [ -z "${AMANDA_PORTS_TCP}" ] && AMANDA_PORTS_TCP= - [ -z "${AMANDA_PORTS_BOTH}" ] && AMANDA_PORTS_BOTH= - [ -z "${AMANDA_PORTS}" ] && AMANDA_PORTS= - - # What tar to use - [ -z "${AMANDA_TAR}" ] && AMANDA_TAR=/bin/tar - - # Now pull in the old stuff - if [ -f "${ROOT}${ENVDIR}/${ENVDFILE}" ]; then - # We don't just source it as we don't want everything in there. - eval $(egrep "^AMANDA_" "${ROOT}${ENVDIR}/${ENVDFILE}" | grep -v '^AMANDA_ENV_SETTINGS') - fi - - # Re-apply the new settings if any - [ -n "${currentamanda}" ] && eval `echo "${currentamanda}"` - -} - -pkg_setup() { - amanda_variable_setup - - # If USE=minimal, give out a warning, if AMANDA_SERVER is not set to - # another host than HOSTNAME. - if use minimal && [ "${AMANDA_SERVER}" = "${HOSTNAME}" ] ; then - elog "You are installing a client-only version of Amanda." - elog "You should set the variable \$AMANDA_SERVER to point at your" - elog "Amanda-tape-server, otherwise you will have to specify its name" - elog "when using amrecover on the client." - elog "For example: Use something like" - elog "AMANDA_SERVER=\"myserver\" emerge amanda" - elog - fi - - enewgroup "${AMANDA_GROUP_NAME}" "${AMANDA_GROUP_GID}" - enewuser "${AMANDA_USER_NAME}" "${AMANDA_USER_UID}" "${AMANDA_USER_SH}" "${AMANDA_USER_HOMEDIR}" "${AMANDA_USER_GROUPS}" -} - -src_unpack() { - # we do not want the perl src_unpack - default_src_unpack -} - -src_prepare() { - # gentoo bug #537248 - epatch "${FILESDIR}/local-amanda-perl5.20.patch" - - # gentoo bug #331111 - sed -i '/^check-local: check-perl$/d' "${S}"/config/automake/scripts.am - sed -i '/^check-local:/s,syntax-check,,g' "${S}"/perl/Makefile.am - - # bug with glibc-2.16.0 - sed -i -e '/gets is a security/d' "${S}"/gnulib/stdio.in.h - - eautoreconf - - # places for us to work in - mkdir -p "${MYFILESDIR}" - # Now we store the settings we just created - set | egrep "^AMANDA_" | grep -v '^AMANDA_ENV_SETTINGS' > "${TMPENVFILE}" - - # Prepare our custom files - einfo "Building custom configuration files" - local i # our iterator - local sedexpr # var for sed expr - sedexpr='' - for i in ${ENV_SETTINGS_AMANDA} ; do - local val - eval "val=\"\${${i}}\"" - sedexpr="${sedexpr}s|__${i}__|${val}|g;" - done - - # now apply the sed expr - for i in "${FILESDIR}"/amanda-* ; do - sed -re "${sedexpr}" <"${i}" >"${MYFILESDIR}/`basename ${i}`" - done - - ( - cat "${MYFILESDIR}"/amanda-amandahosts-client-2.5.1_p3-r1 - use minimal || cat "${MYFILESDIR}"/amanda-amandahosts-server-2.5.1_p3-r1 - ) > "${T}"/amandahosts - - if ! use minimal; then - sed -i -e 's:^\(my $amandahomedir\)=.*:\1 = $localstatedir;:' \ - server-src/am{addclient,serverconfig}.pl || die - fi -} - -src_configure() { - # fix bug #36316 - addpredict /var/cache/samba/gencache.tdb - # fix bug #376169 - addpredict /run/blkid - addpredict /etc/blkid.tab - - [ ! -f "${TMPENVFILE}" ] && die "Variable setting file (${TMPENVFILE}) should exist!" - source "${TMPENVFILE}" - local myconf - - einfo "Using ${AMANDA_SERVER_TAPE} for tape server." - myconf="${myconf} --with-tape-server=${AMANDA_SERVER_TAPE}" - einfo "Using ${AMANDA_SERVER_INDEX} for index server." - myconf="${myconf} --with-index-server=${AMANDA_SERVER_INDEX}" - einfo "Using ${AMANDA_USER_NAME} for amanda user." - myconf="${myconf} --with-user=${AMANDA_USER_NAME}" - einfo "Using ${AMANDA_GROUP_NAME} for amanda group." - myconf="${myconf} --with-group=${AMANDA_GROUP_NAME}" - einfo "Using ${AMANDA_TAR} as Tar implementation." - myconf="${myconf} --with-gnutar=${AMANDA_TAR}" - einfo "Using ${AMANDA_TAR_LISTDIR} as tar listdir." - myconf="${myconf} --with-gnutar-listdir=${AMANDA_TAR_LISTDIR}" - einfo "Using ${AMANDA_CONFIG_NAME} as default config name." - myconf="${myconf} --with-config=${AMANDA_CONFIG_NAME}" - einfo "Using ${AMANDA_TMPDIR} as Amanda temporary directory." - myconf="${myconf} --with-tmpdir=${AMANDA_TMPDIR}" - - if [ -n "${AMANDA_PORTS_UDP}" ] && [ -n "${AMANDA_PORTS_TCP}" ] && [ -z "${AMANDA_PORTS_BOTH}" ] ; then - eerror "If you want _both_ UDP and TCP ports, please use only the" - eerror "AMANDA_PORTS environment variable for identical ports, or set" - eerror "AMANDA_PORTS_BOTH." - die "Bad port setup!" - fi - if [ -n "${AMANDA_PORTS_UDP}" ]; then - einfo "Using UDP ports ${AMANDA_PORTS_UDP/,/-}" - myconf="${myconf} --with-udpportrange=${AMANDA_PORTS_UDP}" - fi - if [ -n "${AMANDA_PORTS_TCP}" ]; then - einfo "Using TCP ports ${AMANDA_PORTS_TCP/,/-}" - myconf="${myconf} --with-tcpportrange=${AMANDA_PORTS_TCP}" - fi - if [ -n "${AMANDA_PORTS}" ]; then - einfo "Using ports ${AMANDA_PORTS/,/-}" - myconf="${myconf} --with-portrange=${AMANDA_PORTS}" - fi - - # Extras - # Speed option - myconf="${myconf} --with-buffered-dump" - # "debugging" in the configuration is NOT debug in the conventional sense. - # It is actually just useful output in the application, and should remain - # enabled. There are some cases of breakage with MTX tape changers as of - # 2.5.1p2 that it exposes when turned off as well. - myconf="${myconf} --with-debugging" - # Where to put our files - myconf="${myconf} --localstatedir=${AMANDA_USER_HOMEDIR}" - - # Samba support - myconf="${myconf} `use_with samba smbclient /usr/bin/smbclient`" - - # Support for BSD, SSH, BSDUDP, BSDTCP security methods all compiled in by - # default - myconf="${myconf} --with-bsd-security" - myconf="${myconf} --with-ssh-security" - myconf="${myconf} --with-bsdudp-security" - myconf="${myconf} --with-bsdtcp-security" - - # kerberos-security mechanism version 5 - myconf="${myconf} `use_with kerberos krb5-security`" - - # Amazon S3 support - myconf="${myconf} `use_enable s3 s3-device`" - - # libcurl is required for S3 but otherwise optional - if ! use s3; then - myconf="${myconf} $(use_with curl libcurl)" - fi - - # Client only, as requested in bug #127725 - if use minimal ; then - myconf="${myconf} --without-server" - else - # amplot - myconf="${myconf} $(use_with gnuplot)" - fi - - # IPv6 fun. - myconf="${myconf} `use_with ipv6`" - # This is to prevent the IPv6-is-working test - # As the test fails on binpkg build hosts with no IPv6. - use ipv6 && export amanda_cv_working_ipv6=yes - - # I18N - myconf="${myconf} `use_enable nls`" - - # Bug #296634: Perl location - perl_set_version - myconf="${myconf} --with-amperldir=${VENDOR_LIB}" - - # Bug 296633: --disable-syntax-checks - # Some tests are not safe for production systems - myconf="${myconf} --disable-syntax-checks" - - # build manpages - myconf="${myconf} --enable-manpage-build" - - # bug #483120 - tc-export AR - - econf \ - $(use_with readline) \ - ${myconf} -} - -src_compile() { - # Again, do not want the perl-module src_compile - default_src_compile -} - -src_install() { - [ ! -f "${TMPENVFILE}" ] && die "Variable setting file (${TMPENVFILE}) should exist!" - source ${TMPENVFILE} - - einfo "Doing stock install" - emake DESTDIR="${D}" install || die - - # Build the envdir file - # Don't forget this.. - einfo "Building environment file" - ( - echo "# These settings are what was present in the environment when this" - echo "# Amanda was compiled. Changing anything below this comment will" - echo "# have no effect on your application, but it merely exists to" - echo "# preserve them for your next emerge of Amanda" - cat "${TMPENVFILE}" | sed "s,=\$,='',g" - ) >> "${MYFILESDIR}/${ENVDFILE}" - - # Env.d - einfo "Installing environment config file" - doenvd "${MYFILESDIR}/${ENVDFILE}" - - # Lock down next section (up until docs). - insopts -m0640 - # Installing Amanda Xinetd Services Definition - einfo "Installing xinetd service file" - insinto /etc/xinetd.d - if use minimal ; then - newins "${MYFILESDIR}"/amanda-xinetd-2.6.1_p1-client amanda - else - newins "${MYFILESDIR}"/amanda-xinetd-2.6.1_p1-server amanda - fi - - if ! use minimal; then - einfo "Installing Sample Daily Cron Job for Amanda" - insinto /etc/cron.daily - newins "${MYFILESDIR}/amanda-cron" amanda - fi - - einfo "Installing systemd service and socket files for Amanda" - systemd_dounit "${FILESDIR}"/amanda.socket || die - systemd_newunit "${FILESDIR}"/amanda.service-r1 '[email protected]' || die - - insinto /etc/amanda - einfo "Installing .amandahosts File for ${AMANDA_USER_NAME} user" - doins "${T}/amandahosts" - fperms 600 /etc/amanda/amandahosts - - dosym /etc/amanda/amandahosts "${AMANDA_USER_HOMEDIR}/.amandahosts" - insinto "${AMANDA_USER_HOMEDIR}" - einfo "Installing .profile for ${AMANDA_USER_NAME} user" - newins "${MYFILESDIR}/amanda-profile" .profile - - insinto /etc/amanda - doins "${S}/example/amanda-client.conf" - if ! use minimal ; then - insinto "/etc/amanda/${AMANDA_CONFIG_NAME}" - doins "${S}/example/amanda.conf" - doins "${S}/example/disklist" - keepdir "${AMANDA_USER_HOMEDIR}/${AMANDA_CONFIG_NAME}/index" - fi - - keepdir "${AMANDA_TAR_LISTDIR}" - keepdir "${AMANDA_USER_HOMEDIR}/amanda" - keepdir "${AMANDA_TMPDIR}/dumps" - # Just make sure it exists for XFS to work... - use xfs && keepdir /var/xfsdump/inventory - - local i - for i in "${AMANDA_USER_HOMEDIR}" "${AMANDA_TAR_LISTDIR}" \ - "${AMANDA_TMPDIR}" /etc/amanda; do - einfo "Securing directory (${i})" - fowners -R ${AMANDA_USER_NAME}:${AMANDA_GROUP_NAME} ${i} - done - # Do NOT use -R - fperms 0700 \ - "${AMANDA_USER_HOMEDIR}" "${AMANDA_TAR_LISTDIR}" \ - "${AMANDA_TMPDIR}" "${AMANDA_TMPDIR}/dumps" \ - "${AMANDA_USER_HOMEDIR}/amanda" \ - /etc/amanda - - if ! use minimal ; then - fperms 0700 \ - "${AMANDA_USER_HOMEDIR}/${AMANDA_CONFIG_NAME}" \ - /etc/amanda/${AMANDA_CONFIG_NAME} - fi - - einfo "Setting setuid permissions" - amanda_permissions_fix "${D}" - - # Relax permissions again - insopts -m0644 - - # docs - einfo "Installing documentation" - dodoc AUTHORS ChangeLog DEVELOPING NEWS README ReleaseNotes UPGRADING - # our inetd sample - einfo "Installing standard inetd sample" - newdoc "${MYFILESDIR}/amanda-inetd.amanda.sample-2.6.0_p2-r2" amanda-inetd.amanda.sample - # Amanda example configs - einfo "Installing example configurations" - rm "${D}"/usr/share/amanda/{COPYRIGHT,ChangeLog,NEWS,ReleaseNotes} - mv "${D}/usr/share/amanda/example" "${D}/usr/share/doc/${PF}/" - docinto example1 - newdoc "${FILESDIR}/example_amanda.conf" amanda.conf - newdoc "${FILESDIR}/example_disklist-2.5.1_p3-r1" disklist - newdoc "${FILESDIR}/example_global.conf" global.conf - - einfo "Cleaning up dud .la files" - perl_set_version - find "${D}"/"${VENDOR_LIB}" -name '*.la' -print0 |xargs -0 rm -f -} - -pkg_postinst() { - [ ! -f "${TMPENVFILE}" -a "$MERGE_TYPE" == "binary" ] && \ - TMPENVFILE="${ROOT}${ENVDIR}/${ENVDFILE}" - [ ! -f "${TMPENVFILE}" ] && die "Variable setting file (${TMPENVFILE}) should exist!" - source "${TMPENVFILE}" - - # Migration of amandates from /etc to $localstatedir/amanda - if [ -f "${ROOT}/etc/amandates" -a \ - ! -f "${ROOT}/${AMANDA_USER_HOMEDIR}/amanda/amandates" ]; then - einfo "Migrating amandates from /etc/ to ${AMANDA_USER_HOMEDIR}/amanda" - einfo "A backup is also placed at /etc/amandates.orig" - cp -dp "${ROOT}/etc/amandates" "${ROOT}/etc/amandates.orig" - mkdir -p "${ROOT}/${AMANDA_USER_HOMEDIR}/amanda/" - cp -dp "${ROOT}/etc/amandates" "${ROOT}/${AMANDA_USER_HOMEDIR}/amanda/amandates" - fi - if [ -f "${ROOT}/etc/amandates" ]; then - einfo "If you have migrated safely, please delete /etc/amandates" - fi - - einfo "Checking setuid permissions" - amanda_permissions_fix "${ROOT}" - - elog "You should configure Amanda in /etc/amanda now." - elog - elog "If you use xinetd, Don't forget to check /etc/xinetd.d/amanda" - elog "and restart xinetd afterwards!" - elog - elog "Otherwise, please look at /usr/share/doc/${PF}/inetd.amanda.sample" - elog "as an example of how to configure your inetd." - elog - elog "systemd-users: enable and start amanda.socket or the relevant services" - elog "regarding what auth method you use." - elog - elog "NOTICE: If you need raw access to partitions you need to add the" - elog "amanda user to the 'disk' group." - elog - elog "NOTICE: If you have a tape changer, you need to add the amanda user" - elog "to the 'tape' group." - elog - elog "If you use localhost in your disklist your restores may break." - elog "You should replace it with the actual hostname!" - elog "Please also see the syntax changes to amandahosts." - elog - elog "Please note that this package no longer explicitly depends on" - elog "virtual/inetd, as it supports modes where an inetd is not needed" - elog "(see bug #506028 for details)." - elog "The only exception is when you use the authentication method 'local'." -} - -# We have had reports of amanda file permissions getting screwed up. -# Losing setuid, becoming too lax etc. -# ONLY root and users in the amanda group should be able to run these binaries! -amanda_permissions_fix() { - local root="$1" - [ -z "${root}" ] && die "Failed to pass root argument to amanda_permissions_fix!" - local le="/usr/libexec/amanda" - for i in /usr/sbin/amcheck "${le}"/calcsize "${le}"/killpgrp \ - "${le}"/rundump "${le}"/runtar "${le}"/dumper \ - "${le}"/planner ; do - chown root:${AMANDA_GROUP_NAME} "${root}"/${i} - chmod u=srwx,g=rx,o= "${root}"/${i} - done -} diff --git a/app-backup/amanda/amanda-3.3.7.ebuild b/app-backup/amanda/amanda-3.3.7.ebuild deleted file mode 100644 index 0a2e3ed3f5e..00000000000 --- a/app-backup/amanda/amanda-3.3.7.ebuild +++ /dev/null @@ -1,474 +0,0 @@ -# Copyright 1999-2015 Gentoo Foundation -# Distributed under the terms of the GNU General Public License v2 - -EAPI=5 -inherit autotools eutils perl-module user systemd - -DESCRIPTION="The Advanced Maryland Automatic Network Disk Archiver" -HOMEPAGE="http://www.amanda.org/"; -SRC_URI="mirror://sourceforge/amanda/${P}.tar.gz" - -LICENSE="HPND BSD BSD-2 GPL-2+ GPL-3+" -SLOT="0" -IUSE="curl gnuplot ipv6 kerberos minimal nls readline s3 samba systemd xfs" - -KEYWORDS="amd64 ~ppc ppc64 ~sparc ~x86" -RDEPEND="sys-libs/readline - virtual/awk - app-arch/tar - dev-lang/perl:= - app-arch/dump - net-misc/openssh - >=dev-libs/glib-2.26.0 - nls? ( virtual/libintl ) - s3? ( >=net-misc/curl-7.10.0 ) - !s3? ( curl? ( >=net-misc/curl-7.10.0 ) ) - samba? ( net-fs/samba ) - kerberos? ( app-crypt/mit-krb5 ) - xfs? ( sys-fs/xfsdump ) - readline? ( sys-libs/readline ) - !minimal? ( - dev-perl/XML-Simple - virtual/mailx - app-arch/mt-st - sys-block/mtx - gnuplot? ( sci-visualization/gnuplot ) - app-crypt/aespipe - app-crypt/gnupg - )" - -DEPEND="${RDEPEND} - virtual/pkgconfig - nls? ( sys-devel/gettext ) - >=app-text/docbook-xsl-stylesheets-1.72.0 - app-text/docbook-xml-dtd - dev-libs/libxslt - " - -MYFILESDIR="${T}/files" -ENVDIR="/etc/env.d" -ENVDFILE="97amanda" -TMPENVFILE="${T}/${ENVDFILE}" - -# This is a complete list of Amanda settings that the ebuild takes from the -# build environment. This allows users to alter the behavior of the package as -# upstream intended, but keeping with Gentoo style. We store a copy of them in -# /etc/env.d/97amanda during the install, so that they are preserved for future -# installed. This variable name must not start with AMANDA_, as we do not want -# it captured into the env file. -ENV_SETTINGS_AMANDA=" -AMANDA_GROUP_GID AMANDA_GROUP_NAME -AMANDA_USER_NAME AMANDA_USER_UID AMANDA_USER_SH AMANDA_USER_HOMEDIR AMANDA_USER_GROUPS -AMANDA_SERVER AMANDA_SERVER_TAPE AMANDA_SERVER_INDEX -AMANDA_TAR_LISTDIR AMANDA_TAR -AMANDA_PORTS_UDP AMANDA_PORTS_TCP AMANDA_PORTS_BOTH AMANDA_PORTS -AMANDA_CONFIG_NAME AMANDA_TMPDIR" - -amanda_variable_setup() { - - # Setting vars - local currentamanda - - # Grab the current settings - currentamanda="$(set | egrep "^AMANDA_" | grep -v '^AMANDA_ENV_SETTINGS' | xargs)" - - # First we set the defaults - [ -z "${AMANDA_GROUP_GID}" ] && AMANDA_GROUP_GID=87 - [ -z "${AMANDA_GROUP_NAME}" ] && AMANDA_GROUP_NAME=amanda - [ -z "${AMANDA_USER_NAME}" ] && AMANDA_USER_NAME=amanda - [ -z "${AMANDA_USER_UID}" ] && AMANDA_USER_UID=87 - [ -z "${AMANDA_USER_SH}" ] && AMANDA_USER_SH=/bin/bash - [ -z "${AMANDA_USER_HOMEDIR}" ] && AMANDA_USER_HOMEDIR=/var/spool/amanda - [ -z "${AMANDA_USER_GROUPS}" ] && AMANDA_USER_GROUPS="${AMANDA_GROUP_NAME}" - - # This installs Amanda, with the server. However, it could be a client, - # just specify an alternate server name in AMANDA_SERVER. - [ -z "${AMANDA_SERVER}" ] && AMANDA_SERVER="${HOSTNAME}" - [ -z "${AMANDA_SERVER_TAPE}" ] && AMANDA_SERVER_TAPE="${AMANDA_SERVER}" - [ -z "${AMANDA_SERVER_INDEX}" ] && AMANDA_SERVER_INDEX="${AMANDA_SERVER}" - [ -z "${AMANDA_TAR_LISTDIR}" ] && AMANDA_TAR_LISTDIR=${AMANDA_USER_HOMEDIR}/tar-lists - [ -z "${AMANDA_CONFIG_NAME}" ] && AMANDA_CONFIG_NAME=DailySet1 - [ -z "${AMANDA_TMPDIR}" ] && AMANDA_TMPDIR=/var/tmp/amanda - [ -z "${AMANDA_DBGDIR}" ] && AMANDA_DBGDIR="$AMANDA_TMPDIR" - # These are left empty by default - [ -z "${AMANDA_PORTS_UDP}" ] && AMANDA_PORTS_UDP= - [ -z "${AMANDA_PORTS_TCP}" ] && AMANDA_PORTS_TCP= - [ -z "${AMANDA_PORTS_BOTH}" ] && AMANDA_PORTS_BOTH= - [ -z "${AMANDA_PORTS}" ] && AMANDA_PORTS= - - # What tar to use - [ -z "${AMANDA_TAR}" ] && AMANDA_TAR=/bin/tar - - # Now pull in the old stuff - if [ -f "${ROOT}${ENVDIR}/${ENVDFILE}" ]; then - # We don't just source it as we don't want everything in there. - eval $(egrep "^AMANDA_" "${ROOT}${ENVDIR}/${ENVDFILE}" | grep -v '^AMANDA_ENV_SETTINGS') - fi - - # Re-apply the new settings if any - [ -n "${currentamanda}" ] && eval `echo "${currentamanda}"` - -} - -pkg_setup() { - amanda_variable_setup - - # If USE=minimal, give out a warning, if AMANDA_SERVER is not set to - # another host than HOSTNAME. - if use minimal && [ "${AMANDA_SERVER}" = "${HOSTNAME}" ] ; then - elog "You are installing a client-only version of Amanda." - elog "You should set the variable \$AMANDA_SERVER to point at your" - elog "Amanda-tape-server, otherwise you will have to specify its name" - elog "when using amrecover on the client." - elog "For example: Use something like" - elog "AMANDA_SERVER=\"myserver\" emerge amanda" - elog - fi - - enewgroup "${AMANDA_GROUP_NAME}" "${AMANDA_GROUP_GID}" - enewuser "${AMANDA_USER_NAME}" "${AMANDA_USER_UID}" "${AMANDA_USER_SH}" "${AMANDA_USER_HOMEDIR}" "${AMANDA_USER_GROUPS}" -} - -src_unpack() { - # we do not want the perl src_unpack - default_src_unpack -} - -src_prepare() { - # gentoo bug #331111 - sed -i '/^check-local: check-perl$/d' "${S}"/config/automake/scripts.am - sed -i '/^check-local:/s,syntax-check,,g' "${S}"/perl/Makefile.am - - # bug with glibc-2.16.0 - sed -i -e '/gets is a security/d' "${S}"/gnulib/stdio.in.h - - eautoreconf - - # places for us to work in - mkdir -p "${MYFILESDIR}" - # Now we store the settings we just created - set | egrep "^AMANDA_" | grep -v '^AMANDA_ENV_SETTINGS' > "${TMPENVFILE}" - - # Prepare our custom files - einfo "Building custom configuration files" - local i # our iterator - local sedexpr # var for sed expr - sedexpr='' - for i in ${ENV_SETTINGS_AMANDA} ; do - local val - eval "val=\"\${${i}}\"" - sedexpr="${sedexpr}s|__${i}__|${val}|g;" - done - - # now apply the sed expr - for i in "${FILESDIR}"/amanda-* ; do - sed -re "${sedexpr}" <"${i}" >"${MYFILESDIR}/`basename ${i}`" - done - - ( - cat "${MYFILESDIR}"/amanda-amandahosts-client-2.5.1_p3-r1 - use minimal || cat "${MYFILESDIR}"/amanda-amandahosts-server-2.5.1_p3-r1 - ) > "${T}"/amandahosts - - if ! use minimal; then - sed -i -e 's:^\(my $amandahomedir\)=.*:\1 = $localstatedir;:' \ - server-src/am{addclient,serverconfig}.pl || die - fi -} - -src_configure() { - # fix bug #36316 - addpredict /var/cache/samba/gencache.tdb - # fix bug #376169 - addpredict /run/blkid - addpredict /etc/blkid.tab - - [ ! -f "${TMPENVFILE}" ] && die "Variable setting file (${TMPENVFILE}) should exist!" - source "${TMPENVFILE}" - local myconf - - einfo "Using ${AMANDA_SERVER_TAPE} for tape server." - myconf="${myconf} --with-tape-server=${AMANDA_SERVER_TAPE}" - einfo "Using ${AMANDA_SERVER_INDEX} for index server." - myconf="${myconf} --with-index-server=${AMANDA_SERVER_INDEX}" - einfo "Using ${AMANDA_USER_NAME} for amanda user." - myconf="${myconf} --with-user=${AMANDA_USER_NAME}" - einfo "Using ${AMANDA_GROUP_NAME} for amanda group." - myconf="${myconf} --with-group=${AMANDA_GROUP_NAME}" - einfo "Using ${AMANDA_TAR} as Tar implementation." - myconf="${myconf} --with-gnutar=${AMANDA_TAR}" - einfo "Using ${AMANDA_TAR_LISTDIR} as tar listdir." - myconf="${myconf} --with-gnutar-listdir=${AMANDA_TAR_LISTDIR}" - einfo "Using ${AMANDA_CONFIG_NAME} as default config name." - myconf="${myconf} --with-config=${AMANDA_CONFIG_NAME}" - einfo "Using ${AMANDA_TMPDIR} as Amanda temporary directory." - myconf="${myconf} --with-tmpdir=${AMANDA_TMPDIR}" - - if [ -n "${AMANDA_PORTS_UDP}" ] && [ -n "${AMANDA_PORTS_TCP}" ] && [ -z "${AMANDA_PORTS_BOTH}" ] ; then - eerror "If you want _both_ UDP and TCP ports, please use only the" - eerror "AMANDA_PORTS environment variable for identical ports, or set" - eerror "AMANDA_PORTS_BOTH." - die "Bad port setup!" - fi - if [ -n "${AMANDA_PORTS_UDP}" ]; then - einfo "Using UDP ports ${AMANDA_PORTS_UDP/,/-}" - myconf="${myconf} --with-udpportrange=${AMANDA_PORTS_UDP}" - fi - if [ -n "${AMANDA_PORTS_TCP}" ]; then - einfo "Using TCP ports ${AMANDA_PORTS_TCP/,/-}" - myconf="${myconf} --with-tcpportrange=${AMANDA_PORTS_TCP}" - fi - if [ -n "${AMANDA_PORTS}" ]; then - einfo "Using ports ${AMANDA_PORTS/,/-}" - myconf="${myconf} --with-portrange=${AMANDA_PORTS}" - fi - - # Extras - # Speed option - myconf="${myconf} --with-buffered-dump" - # "debugging" in the configuration is NOT debug in the conventional sense. - # It is actually just useful output in the application, and should remain - # enabled. There are some cases of breakage with MTX tape changers as of - # 2.5.1p2 that it exposes when turned off as well. - myconf="${myconf} --with-debugging" - # Where to put our files - myconf="${myconf} --localstatedir=${AMANDA_USER_HOMEDIR}" - - # Samba support - myconf="${myconf} `use_with samba smbclient /usr/bin/smbclient`" - - # Support for BSD, SSH, BSDUDP, BSDTCP security methods all compiled in by - # default - myconf="${myconf} --with-bsd-security" - myconf="${myconf} --with-ssh-security" - myconf="${myconf} --with-bsdudp-security" - myconf="${myconf} --with-bsdtcp-security" - - # kerberos-security mechanism version 5 - myconf="${myconf} `use_with kerberos krb5-security`" - - # Amazon S3 support - myconf="${myconf} `use_enable s3 s3-device`" - - # libcurl is required for S3 but otherwise optional - if ! use s3; then - myconf="${myconf} $(use_with curl libcurl)" - fi - - # Client only, as requested in bug #127725 - if use minimal ; then - myconf="${myconf} --without-server" - else - # amplot - myconf="${myconf} $(use_with gnuplot)" - fi - - # IPv6 fun. - myconf="${myconf} `use_with ipv6`" - # This is to prevent the IPv6-is-working test - # As the test fails on binpkg build hosts with no IPv6. - use ipv6 && export amanda_cv_working_ipv6=yes - - # I18N - myconf="${myconf} `use_enable nls`" - - # Bug #296634: Perl location - perl_set_version - myconf="${myconf} --with-amperldir=${VENDOR_LIB}" - - # Bug 296633: --disable-syntax-checks - # Some tests are not safe for production systems - myconf="${myconf} --disable-syntax-checks" - - # build manpages - myconf="${myconf} --enable-manpage-build" - - # bug #483120 - tc-export AR - - econf \ - $(use_with readline) \ - ${myconf} -} - -src_compile() { - # Again, do not want the perl-module src_compile - default_src_compile -} - -src_install() { - [ ! -f "${TMPENVFILE}" ] && die "Variable setting file (${TMPENVFILE}) should exist!" - source ${TMPENVFILE} - - einfo "Doing stock install" - emake DESTDIR="${D}" install || die - - # Build the envdir file - # Don't forget this.. - einfo "Building environment file" - ( - echo "# These settings are what was present in the environment when this" - echo "# Amanda was compiled. Changing anything below this comment will" - echo "# have no effect on your application, but it merely exists to" - echo "# preserve them for your next emerge of Amanda" - cat "${TMPENVFILE}" | sed "s,=\$,='',g" - ) >> "${MYFILESDIR}/${ENVDFILE}" - - # Env.d - einfo "Installing environment config file" - doenvd "${MYFILESDIR}/${ENVDFILE}" - - # Lock down next section (up until docs). - insopts -m0640 - # Installing Amanda Xinetd Services Definition - einfo "Installing xinetd service file" - insinto /etc/xinetd.d - if use minimal ; then - newins "${MYFILESDIR}"/amanda-xinetd-2.6.1_p1-client amanda - else - newins "${MYFILESDIR}"/amanda-xinetd-2.6.1_p1-server amanda - fi - - if ! use minimal; then - einfo "Installing Sample Daily Cron Job for Amanda" - insinto /etc/cron.daily - newins "${MYFILESDIR}/amanda-cron" amanda - fi - - einfo "Installing systemd service and socket files for Amanda" - systemd_dounit "${FILESDIR}"/amanda.socket || die - systemd_newunit "${FILESDIR}"/amanda.service-r1 '[email protected]' || die - - insinto /etc/amanda - einfo "Installing .amandahosts File for ${AMANDA_USER_NAME} user" - doins "${T}/amandahosts" - fperms 600 /etc/amanda/amandahosts - - dosym /etc/amanda/amandahosts "${AMANDA_USER_HOMEDIR}/.amandahosts" - insinto "${AMANDA_USER_HOMEDIR}" - einfo "Installing .profile for ${AMANDA_USER_NAME} user" - newins "${MYFILESDIR}/amanda-profile" .profile - - insinto /etc/amanda - doins "${S}/example/amanda-client.conf" - if ! use minimal ; then - insinto "/etc/amanda/${AMANDA_CONFIG_NAME}" - doins "${S}/example/amanda.conf" - doins "${S}/example/disklist" - keepdir "${AMANDA_USER_HOMEDIR}/${AMANDA_CONFIG_NAME}/index" - fi - - keepdir "${AMANDA_TAR_LISTDIR}" - keepdir "${AMANDA_USER_HOMEDIR}/amanda" - keepdir "${AMANDA_TMPDIR}/dumps" - # Just make sure it exists for XFS to work... - use xfs && keepdir /var/xfsdump/inventory - - local i - for i in "${AMANDA_USER_HOMEDIR}" "${AMANDA_TAR_LISTDIR}" \ - "${AMANDA_TMPDIR}" /etc/amanda; do - einfo "Securing directory (${i})" - fowners -R ${AMANDA_USER_NAME}:${AMANDA_GROUP_NAME} ${i} - done - # Do NOT use -R - fperms 0700 \ - "${AMANDA_USER_HOMEDIR}" "${AMANDA_TAR_LISTDIR}" \ - "${AMANDA_TMPDIR}" "${AMANDA_TMPDIR}/dumps" \ - "${AMANDA_USER_HOMEDIR}/amanda" \ - /etc/amanda - - if ! use minimal ; then - fperms 0700 \ - "${AMANDA_USER_HOMEDIR}/${AMANDA_CONFIG_NAME}" \ - /etc/amanda/${AMANDA_CONFIG_NAME} - fi - - einfo "Setting setuid permissions" - amanda_permissions_fix "${D}" - - # Relax permissions again - insopts -m0644 - - # docs - einfo "Installing documentation" - dodoc AUTHORS ChangeLog DEVELOPING NEWS README ReleaseNotes UPGRADING - # our inetd sample - einfo "Installing standard inetd sample" - newdoc "${MYFILESDIR}/amanda-inetd.amanda.sample-2.6.0_p2-r2" amanda-inetd.amanda.sample - # Amanda example configs - einfo "Installing example configurations" - rm "${D}"/usr/share/amanda/{COPYRIGHT,ChangeLog,NEWS,ReleaseNotes} - mv "${D}/usr/share/amanda/example" "${D}/usr/share/doc/${PF}/" - docinto example1 - newdoc "${FILESDIR}/example_amanda.conf" amanda.conf - newdoc "${FILESDIR}/example_disklist-2.5.1_p3-r1" disklist - newdoc "${FILESDIR}/example_global.conf" global.conf - - einfo "Cleaning up dud .la files" - perl_set_version - find "${D}"/"${VENDOR_LIB}" -name '*.la' -print0 |xargs -0 rm -f -} - -pkg_postinst() { - [ ! -f "${TMPENVFILE}" -a "$MERGE_TYPE" == "binary" ] && \ - TMPENVFILE="${ROOT}${ENVDIR}/${ENVDFILE}" - [ ! -f "${TMPENVFILE}" ] && die "Variable setting file (${TMPENVFILE}) should exist!" - source "${TMPENVFILE}" - - # Migration of amandates from /etc to $localstatedir/amanda - if [ -f "${ROOT}/etc/amandates" -a \ - ! -f "${ROOT}/${AMANDA_USER_HOMEDIR}/amanda/amandates" ]; then - einfo "Migrating amandates from /etc/ to ${AMANDA_USER_HOMEDIR}/amanda" - einfo "A backup is also placed at /etc/amandates.orig" - cp -dp "${ROOT}/etc/amandates" "${ROOT}/etc/amandates.orig" - mkdir -p "${ROOT}/${AMANDA_USER_HOMEDIR}/amanda/" - cp -dp "${ROOT}/etc/amandates" "${ROOT}/${AMANDA_USER_HOMEDIR}/amanda/amandates" - fi - if [ -f "${ROOT}/etc/amandates" ]; then - einfo "If you have migrated safely, please delete /etc/amandates" - fi - - einfo "Checking setuid permissions" - amanda_permissions_fix "${ROOT}" - - elog "You should configure Amanda in /etc/amanda now." - elog - elog "If you use xinetd, Don't forget to check /etc/xinetd.d/amanda" - elog "and restart xinetd afterwards!" - elog - elog "Otherwise, please look at /usr/share/doc/${PF}/inetd.amanda.sample" - elog "as an example of how to configure your inetd." - elog - elog "systemd-users: enable and start amanda.socket or the relevant services" - elog "regarding what auth method you use." - elog - elog "NOTICE: If you need raw access to partitions you need to add the" - elog "amanda user to the 'disk' group." - elog - elog "NOTICE: If you have a tape changer, you need to add the amanda user" - elog "to the 'tape' group." - elog - elog "If you use localhost in your disklist your restores may break." - elog "You should replace it with the actual hostname!" - elog "Please also see the syntax changes to amandahosts." - elog - elog "Please note that this package no longer explicitly depends on" - elog "virtual/inetd, as it supports modes where an inetd is not needed" - elog "(see bug #506028 for details)." - elog "The only exception is when you use the authentication method 'local'." -} - -# We have had reports of amanda file permissions getting screwed up. -# Losing setuid, becoming too lax etc. -# ONLY root and users in the amanda group should be able to run these binaries! -amanda_permissions_fix() { - local root="$1" - [ -z "${root}" ] && die "Failed to pass root argument to amanda_permissions_fix!" - local le="/usr/libexec/amanda" - for i in /usr/sbin/amcheck "${le}"/calcsize "${le}"/killpgrp \ - "${le}"/rundump "${le}"/runtar "${le}"/dumper \ - "${le}"/planner ; do - chown root:${AMANDA_GROUP_NAME} "${root}"/${i} - chmod u=srwx,g=rx,o= "${root}"/${i} - done -}
