commit: 513cc0319dca99422e0a6f6f52dc37c281d05234
Author: Marc Schiffbauer <mschiff <AT> gentoo <DOT> org>
AuthorDate: Mon Feb 13 20:08:57 2017 +0000
Commit: Marc Schiffbauer <mschiff <AT> gentoo <DOT> org>
CommitDate: Mon Feb 13 20:08:57 2017 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=513cc031
sys-fs/lvm2: Add sanlock USE flag for lvmlockd, fixes #604334
Package-Manager: Portage-2.3.3, Repoman-2.3.1
sys-fs/lvm2/files/lvm.rc-2.02.166-r1 | 135 ++++++++++++
sys-fs/lvm2/files/lvmlockd.initd-2.02.166-r1 | 18 ++
sys-fs/lvm2/lvm2-2.02.166-r1.ebuild | 298 +++++++++++++++++++++++++++
sys-fs/lvm2/metadata.xml | 1 +
4 files changed, 452 insertions(+)
diff --git a/sys-fs/lvm2/files/lvm.rc-2.02.166-r1
b/sys-fs/lvm2/files/lvm.rc-2.02.166-r1
new file mode 100644
index 0000000000..e779d2fb09
--- /dev/null
+++ b/sys-fs/lvm2/files/lvm.rc-2.02.166-r1
@@ -0,0 +1,135 @@
+#!/sbin/openrc-run
+# Copyright 1999-2017 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Id$
+
+_get_lvm_path() {
+ local lvm_path=
+ for lvm_path in /bin/lvm /sbin/lvm ; do
+ [ -x "$lvm_path" ] && break
+ done
+ echo "${lvm_path}"
+}
+
+_need_lvmetad()
+{
+ local lvm_path="$(_get_lvm_path)"
+ [ ! -x "${lvm_path}" ] && return 1
+ ${lvm_path} dumpconfig global 2>/dev/null | grep -q 'use_lvmetad=1'
+}
+
+depend() {
+ before checkfs fsck
+ after modules device-mapper
+ # We may use lvmetad based on the configuration. If we added lvmetad
+ # support while lvm2 is running then we aren't dependent on it. For the
+ # more common case, if its disabled in the config we aren't dependent
+ # on it.
+ config /etc/lvm/lvm.conf
+ local _need=
+ if service_started; then
+ _need=$(service_get_value need)
+ else
+ if _need_lvmetad; then
+ _need="${_need} lvmetad"
+ fi
+ fi
+ need sysfs ${_need}
+}
+
+config='global { locking_dir = "/run/lock/lvm" }'
+
+dm_in_proc() {
+ local retval=0
+ for x in devices misc ; do
+ grep -qs 'device-mapper' /proc/${x}
+ retval=$((${retval} + $?))
+ done
+ return ${retval}
+}
+
+start() {
+ # LVM support for /usr, /home, /opt ....
+ # This should be done *before* checking local
+ # volumes, or they never get checked.
+
+ # NOTE: Add needed modules for LVM or RAID, etc
+ # to /etc/modules.autoload if needed
+ lvm_path="$(_get_lvm_path)"
+ for lvm_path in /bin/lvm /sbin/lvm ; do
+ [ -x "$lvm_path" ] && break
+ done
+ if [ ! -x "$lvm_path" ]; then
+ eerror "Cannot find lvm binary in /sbin or /bin!"
+ return 1
+ fi
+ if [ -z "${CDBOOT}" ] ; then
+ if [ -e /proc/modules ] && ! dm_in_proc ; then
+ modprobe dm-mod 2>/dev/null
+ fi
+ if [ -d /proc/lvm ] || dm_in_proc ; then
+ ebegin "Setting up the Logical Volume Manager"
+ #still echo stderr for debugging
+ lvm_commands="#! ${lvm_path} --config '${config}'\n"
+ # Extra PV find pass because some devices might not
have been available until very recently
+ lvm_commands="${lvm_commands}pvscan\n"
+ # Now make the nodes
+ lvm_commands="${lvm_commands}vgscan --mknodes\n"
+ # And turn them on!
+ lvm_commands="${lvm_commands}vgchange --sysinit -a ly\n"
+ # Start lockd VGs as required
+ lvm_commands="${lvm_commands}vgchange --lock-start
--lock-opt auto\n"
+ # Order of this is important, have to work around dash
and LVM readline
+ printf "%b\n" "${lvm_commands}" | $lvm_path
/proc/self/fd/0 --config "${config}" >/dev/null
+ eend $? "Failed to setup the LVM"
+ fi
+ fi
+}
+
+start_post()
+{
+ # Save if we needed lvmetad
+ if _need_lvmetad; then
+ service_set_value need lvmetad
+ fi
+}
+
+stop() {
+ for lvm_path in /bin/lvm /sbin/lvm ; do
+ [ -x "$lvm_path" ] && break
+ done
+ if [ ! -x "$lvm_path" ]; then
+ eerror "Cannot find lvm binary in /sbin or /bin!"
+ return 1
+ fi
+# Stop LVM2
+if [ -x /sbin/vgs ] && \
+ [ -x /sbin/vgchange ] && \
+ [ -x /sbin/lvchange ] && \
+ [ -f /etc/lvmtab -o -d /etc/lvm ] && \
+ [ -d /proc/lvm -o "`grep device-mapper /proc/misc 2>/dev/null`" ]
+then
+ einfo "Shutting down the Logical Volume Manager"
+
+ VGS=$($lvm_path vgs --config "${config}" -o vg_name --noheadings
--nosuffix --rows 2> /dev/null)
+
+ if [ "$VGS" ]
+ then
+ ebegin " Shutting Down LVs & VGs"
+ #still echo stderr for debugging
+ lvm_commands="#! ${lvm_path} --config '${config}'\n"
+ # Extra PV find pass because some devices might not
have been available until very recently
+ lvm_commands="${lvm_commands}lvchange --sysinit -a ln
${VGS}\n"
+ # Now make the nodes
+ lvm_commands="${lvm_commands}vgchange --sysinit -a ln
${VGS}\n"
+ # Order of this is important, have to work around dash
and LVM readline
+ printf "%b\n" "${lvm_commands}" | $lvm_path
/proc/self/fd/0 --config "${config}" >/dev/null
+ eend $? "Failed (possibly some LVs still needed for
/usr or root)"
+ fi
+
+ einfo "Finished shutting down the Logical Volume Manager"
+ return 0
+fi
+}
+
+# vim:ts=4
diff --git a/sys-fs/lvm2/files/lvmlockd.initd-2.02.166-r1
b/sys-fs/lvm2/files/lvmlockd.initd-2.02.166-r1
new file mode 100644
index 0000000000..bf3292a797
--- /dev/null
+++ b/sys-fs/lvm2/files/lvmlockd.initd-2.02.166-r1
@@ -0,0 +1,18 @@
+#!/sbin/openrc-run
+# Copyright 1999-2017 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Id$
+
+pidfile="/run/lvmlockd.pid"
+command="/sbin/lvmlockd"
+command_args="${LVMLOCKD_OPTS:--p ${pidfile}} ${LVMLOCKD_TYPE:--g sanlock}"
+start_stop_daemon_args="--pidfile ${pidfile}"
+
+depend() {
+ before sanlock
+}
+
+start_pre()
+{
+ checkpath --directory /run/lvm || return 1
+}
diff --git a/sys-fs/lvm2/lvm2-2.02.166-r1.ebuild
b/sys-fs/lvm2/lvm2-2.02.166-r1.ebuild
new file mode 100644
index 0000000000..8be6acbd8f
--- /dev/null
+++ b/sys-fs/lvm2/lvm2-2.02.166-r1.ebuild
@@ -0,0 +1,298 @@
+# Copyright 1999-2017 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Id$
+
+EAPI=6
+inherit autotools eutils linux-info multilib systemd toolchain-funcs udev
flag-o-matic
+
+DESCRIPTION="User-land utilities for LVM2 (device-mapper) software"
+HOMEPAGE="https://sourceware.org/lvm2/";
+SRC_URI="ftp://sourceware.org/pub/lvm2/${PN/lvm/LVM}.${PV}.tgz
+ ftp://sourceware.org/pub/lvm2/old/${PN/lvm/LVM}.${PV}.tgz";
+
+LICENSE="GPL-2"
+SLOT="0"
+KEYWORDS="~amd64 ~x86 ~amd64-linux ~x86-linux"
+IUSE="readline static static-libs systemd clvm cman corosync lvm1
lvm2create_initrd openais sanlock selinux +udev +thin device-mapper-only"
+REQUIRED_USE="device-mapper-only? ( !clvm !cman !corosync !lvm1
!lvm2create_initrd !openais !sanlock !thin )
+ systemd? ( udev )
+ clvm? ( !systemd )"
+
+DEPEND_COMMON="
+ clvm? (
+ cman? ( =sys-cluster/cman-3* )
+ corosync? ( sys-cluster/corosync )
+ openais? ( sys-cluster/openais )
+ =sys-cluster/libdlm-3*
+ )
+
+ readline? ( sys-libs/readline:0= )
+ sanlock? ( sys-cluster/sanlock )
+ systemd? ( >=sys-apps/systemd-205:0= )
+ udev? ( >=virtual/libudev-208:=[static-libs?] )"
+# /run is now required for locking during early boot. /var cannot be assumed to
+# be available -- thus, pull in recent enough baselayout for /run.
+# This version of LVM is incompatible with cryptsetup <1.1.2.
+RDEPEND="${DEPEND_COMMON}
+ >=sys-apps/baselayout-2.2
+ !<sys-apps/openrc-0.11
+ !<sys-fs/cryptsetup-1.1.2
+ !!sys-fs/clvm
+ !!sys-fs/lvm-user
+ >=sys-apps/util-linux-2.16
+ lvm2create_initrd? ( sys-apps/makedev )
+ thin? ( >=sys-block/thin-provisioning-tools-0.3.0 )"
+# note: thin- 0.3.0 is required to avoid --disable-thin_check_needs_check
+# USE 'static' currently only works with eudev, bug 520450
+DEPEND="${DEPEND_COMMON}
+ virtual/pkgconfig
+ >=sys-devel/binutils-2.20.1-r1
+ sys-devel/autoconf-archive
+ static? (
+ selinux? ( sys-libs/libselinux[static-libs] )
+ udev? ( >=sys-fs/eudev-3.1.2[static-libs] )
+ >=sys-apps/util-linux-2.16[static-libs]
+ )"
+
+S=${WORKDIR}/${PN/lvm/LVM}.${PV}
+
+PATCHES=(
+ # Gentoo specific modification(s):
+ "${FILESDIR}"/${PN}-2.02.129-example.conf.in.patch
+
+ # For upstream -- review and forward:
+ "${FILESDIR}"/${PN}-2.02.63-always-make-static-libdm.patch
+ "${FILESDIR}"/${PN}-2.02.56-lvm2create_initrd.patch
+ "${FILESDIR}"/${PN}-2.02.67-createinitrd.patch #301331
+ "${FILESDIR}"/${PN}-2.02.99-locale-muck.patch #330373
+ "${FILESDIR}"/${PN}-2.02.70-asneeded.patch # -Wl,--as-needed
+ "${FILESDIR}"/${PN}-2.02.139-dynamic-static-ldflags.patch #332905
+ "${FILESDIR}"/${PN}-2.02.129-static-pkgconfig-libs.patch #370217,
#439414 + blkid
+ "${FILESDIR}"/${PN}-2.02.130-pthread-pkgconfig.patch #492450
+ #"${FILESDIR}"/${PN}-2.02.145-mkdev.patch #580062 # Merged upstream
+)
+
+pkg_setup() {
+ local CONFIG_CHECK="~SYSVIPC"
+
+ if use udev; then
+ local WARNING_SYSVIPC="CONFIG_SYSVIPC:\tis not set (required
for udev sync)\n"
+ if linux_config_exists; then
+ local uevent_helper_path=$(linux_chkconfig_string
UEVENT_HELPER_PATH)
+ if [ -n "${uevent_helper_path}" ] && [
"${uevent_helper_path}" != '""' ]; then
+ ewarn "It's recommended to set an empty value
to the following kernel config option:"
+ ewarn
"CONFIG_UEVENT_HELPER_PATH=${uevent_helper_path}"
+ fi
+ fi
+ fi
+
+ check_extra_config
+
+ # 1. Genkernel no longer copies /sbin/lvm blindly.
+ if use static; then
+ elog "Warning, we no longer overwrite /sbin/lvm and
/sbin/dmsetup with"
+ elog "their static versions. If you need the static binaries,"
+ elog "you must append .static to the filename!"
+ fi
+}
+
+src_prepare() {
+ default
+
+ sed -i \
+ -e "1iAR = $(tc-getAR)" \
+ -e "s:CC ?= @CC@:CC = $(tc-getCC):" \
+ make.tmpl.in || die #444082
+
+ sed -i -e '/FLAG/s:-O2::' configure{.in,} || die #480212
+
+ if use udev && ! use device-mapper-only; then
+ sed -i -e '/use_lvmetad =/s:0:1:' conf/example.conf.in || die
#514196
+ elog "Notice that \"use_lvmetad\" setting is enabled with
USE=\"udev\" in"
+ elog "/etc/lvm/lvm.conf, which will require restart of udev,
lvm, and lvmetad"
+ elog "if it was previously disabled."
+ fi
+
+ sed -i -e "s:/usr/bin/true:$(type -P true):"
scripts/blk_availability_systemd_red_hat.service.in || die #517514
+
+ # Without thin-privision-tools, there is nothing to install for target
install_man7:
+ use thin || { sed -i -e '/^install_lvm2/s:install_man7::'
man/Makefile.in || die; }
+
+ eautoreconf
+}
+
+src_configure() {
+ filter-flags -flto
+ local myconf=()
+ local buildmode
+
+ myconf+=( $(use_enable !device-mapper-only dmeventd) )
+ myconf+=( $(use_enable !device-mapper-only cmdlib) )
+ myconf+=( $(use_enable !device-mapper-only applib) )
+ myconf+=( $(use_enable !device-mapper-only fsadm) )
+ myconf+=( $(use_enable !device-mapper-only lvmetad) )
+ use device-mapper-only && myconf+=(
--disable-udev-systemd-background-jobs )
+
+ # Most of this package does weird stuff.
+ # The build options are tristate, and --without is NOT supported
+ # options: 'none', 'internal', 'shared'
+ if use static; then
+ buildmode="internal"
+ # This only causes the .static versions to become available
+ myconf+=( --enable-static_link )
+ else
+ buildmode="shared"
+ fi
+ dmbuildmode=$(use !device-mapper-only && echo internal || echo none)
+
+ # dmeventd requires mirrors to be internal, and snapshot available
+ # so we cannot disable them
+ myconf+=( --with-mirrors=${dmbuildmode} )
+ myconf+=( --with-snapshots=${dmbuildmode} )
+ if use thin; then
+ myconf+=( --with-thin=internal --with-cache=internal )
+ local texec
+ for texec in check dump repair restore; do
+ myconf+=(
--with-thin-${texec}="${EPREFIX}"/sbin/thin_${texec} )
+ myconf+=(
--with-cache-${texec}="${EPREFIX}"/sbin/cache_${texec} )
+ done
+ else
+ myconf+=( --with-thin=none --with-cache=none )
+ fi
+
+ if use lvm1; then
+ myconf+=( --with-lvm1=${buildmode} )
+ else
+ myconf+=( --with-lvm1=none )
+ fi
+
+ # disable O_DIRECT support on hppa, breaks pv detection (#99532)
+ use hppa && myconf+=( --disable-o_direct )
+
+ if use clvm; then
+ myconf+=( --with-cluster=${buildmode} )
+ # 4-state! Make sure we get it right, per bug 210879
+ # Valid options are: none, cman, gulm, all
+ #
+ # 2009/02:
+ # gulm is removed now, now dual-state:
+ # cman, none
+ # all still exists, but is not needed
+ #
+ # 2009/07:
+ # TODO: add corosync and re-enable ALL
+ local clvmd=""
+ use cman && clvmd="cman"
+ #clvmd="${clvmd/cmangulm/all}"
+ use corosync && clvmd="${clvmd:+$clvmd,}corosync"
+ use openais && clvmd="${clvmd:+$clvmd,}openais"
+ [ -z "${clvmd}" ] && clvmd="none"
+ myconf+=( --with-clvmd=${clvmd} )
+ myconf+=( --with-pool=${buildmode} )
+
+ else
+ myconf+=( --with-clvmd=none --with-cluster=none )
+ fi
+
+ econf \
+ $(use_enable readline) \
+ $(use_enable selinux) \
+ --enable-pkgconfig \
+ --with-confdir="${EPREFIX}"/etc \
+ --exec-prefix="${EPREFIX}" \
+ --sbindir="${EPREFIX}/sbin" \
+ --with-staticdir="${EPREFIX}"/sbin \
+ --libdir="${EPREFIX}/$(get_libdir)" \
+ --with-usrlibdir="${EPREFIX}/usr/$(get_libdir)" \
+ --with-default-dm-run-dir=/run \
+ --with-default-run-dir=/run/lvm \
+ --with-default-locking-dir=/run/lock/lvm \
+ --with-default-pid-dir=/run \
+ $(use_enable udev udev_rules) \
+ $(use_enable udev udev_sync) \
+ $(use_with udev udevdir "$(get_udevdir)"/rules.d) \
+ $(use_enable sanlock lockd-sanlock) \
+ $(use_enable systemd udev-systemd-background-jobs) \
+ --with-systemdsystemunitdir="$(systemd_get_systemunitdir)" \
+ ${myconf[@]} \
+ CLDFLAGS="${LDFLAGS}"
+}
+
+src_compile() {
+ pushd include >/dev/null
+ emake
+ popd >/dev/null
+
+ if use device-mapper-only ; then
+ emake device-mapper
+ else
+ emake
+ emake CC="$(tc-getCC)" -C scripts
lvm2_activation_generator_systemd_red_hat
+ fi
+}
+
+src_install() {
+ local inst
+ INSTALL_TARGETS="install install_tmpfiles_configuration"
+ # install systemd related files only when requested, bug #522430
+ use systemd && INSTALL_TARGETS="${INSTALL_TARGETS}
install_systemd_units install_systemd_generators"
+ use device-mapper-only && INSTALL_TARGETS="install_device-mapper"
+ for inst in ${INSTALL_TARGETS}; do
+ emake DESTDIR="${D}" ${inst}
+ done
+
+ newinitd "${FILESDIR}"/device-mapper.rc-2.02.105-r2 device-mapper
+ newconfd "${FILESDIR}"/device-mapper.conf-1.02.22-r3 device-mapper
+
+ if use !device-mapper-only ; then
+ newinitd "${FILESDIR}"/dmeventd.initd-2.02.67-r1 dmeventd
+ newinitd "${FILESDIR}"/lvm.rc-2.02.166-r1 lvm
+ newconfd "${FILESDIR}"/lvm.confd-2.02.28-r2 lvm
+
+ newinitd "${FILESDIR}"/lvm-monitoring.initd-2.02.105-r2
lvm-monitoring
+ newinitd "${FILESDIR}"/lvmetad.initd-2.02.116-r3 lvmetad
+ fi
+
+ if use sanlock; then
+ newinitd "${FILESDIR}"/lvmlockd.initd-2.02.166-r1 lvmlockd
+ fi
+
+ if use clvm; then
+ newinitd "${FILESDIR}"/clvmd.rc-2.02.39 clvmd
+ newconfd "${FILESDIR}"/clvmd.confd-2.02.39 clvmd
+ fi
+
+ if use static-libs; then
+ dolib.a libdm/ioctl/libdevmapper.a
+ dolib.a libdaemon/client/libdaemonclient.a #462908
+ #gen_usr_ldscript libdevmapper.so
+ dolib.a daemons/dmeventd/libdevmapper-event.a
+ #gen_usr_ldscript libdevmapper-event.so
+ else
+ rm -f
"${ED}"usr/$(get_libdir)/{libdevmapper-event,liblvm2cmd,liblvm2app,libdevmapper}.a
+ fi
+
+ if use lvm2create_initrd; then
+ dosbin scripts/lvm2create_initrd/lvm2create_initrd
+ doman scripts/lvm2create_initrd/lvm2create_initrd.8
+ newdoc scripts/lvm2create_initrd/README README.lvm2create_initrd
+ fi
+
+ insinto /etc
+ doins "${FILESDIR}"/dmtab
+
+ dodoc README VERSION* WHATS_NEW WHATS_NEW_DM doc/*.{c,txt} conf/*.conf
+}
+
+pkg_postinst() {
+ ewarn "Make sure the \"lvm\" init script is in the runlevels:"
+ ewarn "# rc-update add lvm boot"
+ ewarn
+ ewarn "Make sure to enable lvmetad in /etc/lvm/lvm.conf if you want"
+ ewarn "to enable lvm autoactivation and metadata caching."
+}
+
+src_test() {
+ einfo "Tests are disabled because of device-node mucking, if you want
to"
+ einfo "run tests, compile the package and see ${S}/tests"
+}
diff --git a/sys-fs/lvm2/metadata.xml b/sys-fs/lvm2/metadata.xml
index 33079b1d9c..cca547ca5c 100644
--- a/sys-fs/lvm2/metadata.xml
+++ b/sys-fs/lvm2/metadata.xml
@@ -24,6 +24,7 @@
<flag name="openais">Openais support for clustered lvm</flag>
<flag name="thin">Support for thin volumes</flag>
<flag name="device-mapper-only">Build only device-mapper and
not the rest of LVM2 (UNSUPPORTED)</flag>
+ <flag name="sanlock">Enable lvmlockd with support for
sanlock</flag>
</use>
<upstream>
<remote-id type="cpe">cpe:/a:heinz_mauelshagen:lvm2</remote-id>
