commit: e54925bf06f6545d3a5e03676d00d9310d509068
Author: Sam James <sam <AT> gentoo <DOT> org>
AuthorDate: Fri Mar 14 05:12:51 2025 +0000
Commit: Sam James <sam <AT> gentoo <DOT> org>
CommitDate: Fri Mar 14 05:12:51 2025 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=e54925bf
sys-libs/ncurses: drop 6.5-r1, 6.5_p20250118, 6.5_p20250301
Signed-off-by: Sam James <sam <AT> gentoo.org>
sys-libs/ncurses/ncurses-6.5-r1.ebuild | 429 -----------------------
sys-libs/ncurses/ncurses-6.5_p20250118.ebuild | 473 -------------------------
sys-libs/ncurses/ncurses-6.5_p20250301.ebuild | 480 --------------------------
3 files changed, 1382 deletions(-)
diff --git a/sys-libs/ncurses/ncurses-6.5-r1.ebuild
b/sys-libs/ncurses/ncurses-6.5-r1.ebuild
deleted file mode 100644
index 3b8b72cdf0f2..000000000000
--- a/sys-libs/ncurses/ncurses-6.5-r1.ebuild
+++ /dev/null
@@ -1,429 +0,0 @@
-# Copyright 1999-2024 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=8
-
-# sys-libs/ncurses-compat can be bumped with sys-libs/ncurses as upstream
-# provide a configure option for the ABI version.
-
-VERIFY_SIG_OPENPGP_KEY_PATH=/usr/share/openpgp-keys/thomasdickey.asc
-inherit flag-o-matic toolchain-funcs multilib multilib-minimal preserve-libs
usr-ldscript verify-sig
-
-MY_PV="${PV:0:3}"
-MY_P="${PN}-${MY_PV}"
-DESCRIPTION="Console display library"
-HOMEPAGE="https://www.gnu.org/software/ncurses/
https://invisible-island.net/ncurses/";
-# Keep invisible-mirror.net here as some users reported 403 forbidden with
invisible-island.net
-SRC_URI="
- mirror://gnu/ncurses/${MY_P}.tar.gz
- https://invisible-island.net/archives/${PN}/${MY_P}.tar.gz
- https://invisible-mirror.net/archives/${PN}/${MY_P}.tar.gz
- verify-sig? ( mirror://gnu/ncurses/${MY_P}.tar.gz.sig )
-"
-
-GENTOO_PATCH_DEV=sam
-GENTOO_PATCH_PV=6.4_p20240413
-GENTOO_PATCH_NAME=${PN}-${GENTOO_PATCH_PV}-patches
-
-# Populated below in a loop. Do not add patches manually here.
-UPSTREAM_PATCHES=()
-
-if [[ ${PV} == *_p* ]] ; then
- # Sometimes, after releases, there's no megapatch available yet.
- #
- # From upstream README at e.g.
https://invisible-island.net/archives/ncurses/6.3/:
- #
- # "At times (generally to mark a relatively stable point), I
create a rollup
- # patch, which consists of all changes from the release through
the current date."
- #
- # Also, from
https://lists.gnu.org/archive/html/bug-ncurses/2019-08/msg00039.html,
- # the patches are considered to be acceptable to use after some
testing. They
- # are both for development but also bug fixes.
- #
- # This array should contain a list of all the snapshots since the last
- # release if there's no megapatch available yet.
- PATCH_DATES=(
- #20240101
-
- # Latest patch is just _pN = $(ver_cut 4)
- $(ver_cut 4)
- )
-
- if [[ -z ${PATCH_DATES[@]} ]] ; then
- SRC_URI+="
https://invisible-island.net/archives/${PN}/${PV/_p*}/${MY_P/_p/-}.patch.sh.gz";
- SRC_URI+=" verify-sig? (
https://invisible-island.net/archives/${PN}/${PV/_p*}/${MY_P/_p/-}.patch.sh.gz.asc";
-
- # If we have a rollup patch, use that instead of the individual
ones.
- UPSTREAM_PATCHES+=( patch.sh )
- else
- # We use a mirror as well because we've had reports of 403
forbidden for some users.
-
upstream_url_base="https://invisible-island.net/archives/${PN}/${PV/_p*}/${MY_P}-";
-
upstream_m_url_base="https://invisible-mirror.net/archives/${PN}/${PV/_p*}/${MY_P}-";
-
- # Prefix each date with the upstream location
(https://invisible-island.net/archives/${PN}/${PV/_p*}/${MY_P})
- mangled_patches=( "${PATCH_DATES[@]/#/${upstream_url_base}}" )
- # Suffix each with .patch.gz
- mangled_patches=( "${mangled_patches[@]/%/.patch.gz}" )
- mangled_patches_sig=( "${mangled_patches[@]/%/.asc}" )
- # Repeat for .patch.gz.asc for verify-sig
- SRC_URI+=" ${mangled_patches[@]}"
- SRC_URI+=" verify-sig? ( ${mangled_patches_sig[@]} )"
-
- # For all of the URLs, chuck in invisible-island.net too:
- SRC_URI+="
${mangled_patches[@]/${upstream_url_base}/${upstream_m_url_base}}"
- SRC_URI+=" verify-sig? (
${mangled_patches_sig[@]/${upstream_url_base}/${upstream_m_url_base}} )"
-
- UPSTREAM_PATCHES=( "${PATCH_DATES[@]/%/.patch}" )
-
- unset upstream_url_base upstream_m_url_base mangled_patches
mangled_patches_sig
- fi
-fi
-
-SRC_URI+="
https://dev.gentoo.org/~${GENTOO_PATCH_DEV}/distfiles/${CATEGORY}/${PN}/${GENTOO_PATCH_NAME}.tar.xz";
-S="${WORKDIR}/${MY_P}"
-
-LICENSE="MIT"
-# The subslot reflects the SONAME.
-SLOT="0/6"
-KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~loong ~m68k ~mips ~ppc ~ppc64
~riscv ~s390 ~sparc ~x86 ~amd64-linux ~x86-linux ~arm64-macos ~ppc-macos
~x64-macos ~x64-solaris"
-IUSE="ada +cxx debug doc gpm minimal profile split-usr +stack-realign
static-libs test tinfo trace"
-RESTRICT="!test? ( test )"
-
-# TODO: ncurses allows (and we take advantage of this, even) passing
-# the SONAME for dlopen() use, so only the header is needed at build time.
-# Maybe we should bundle a copy of gpm.h so we can move gpm to PDEPEND
-# which would be far nicer UX-wise.
-DEPEND="gpm? ( sys-libs/gpm[${MULTILIB_USEDEP}] )"
-# Block the older ncurses that installed all files w/SLOT=5, bug #557472
-RDEPEND="
- ${DEPEND}
- !<=sys-libs/ncurses-5.9-r4:5
- !<sys-libs/slang-2.3.2_pre23
- !<x11-terms/rxvt-unicode-9.06-r3
- !<x11-terms/st-0.6-r1
-"
-BDEPEND="verify-sig? ( sec-keys/openpgp-keys-thomasdickey )"
-
-PATCHES=(
- "${UPSTREAM_PATCHES[@]/#/${WORKDIR}/${MY_P}-}"
-
- # When rebasing Gentoo's patchset, please use git from a clean
- # src_prepare with upstream patches already applied. git am --reject
- # the existing patchset and rebase as required. This makes it easier
- # to manage future rebasing & adding new patches.
- #
- # For the same reasons, please include the original configure.in
changes,
- # NOT just the generated results!
- "${WORKDIR}"/${GENTOO_PATCH_NAME}
-
- # Avoid breakage with CHOST ending in t64
- "${FILESDIR}"/ncurses-6.4-t64-1.patch
- "${FILESDIR}"/ncurses-6.4-t64-2.patch
-)
-
-src_unpack() {
- # Avoid trying to verify our own patchset tarball, there's no point
- if use verify-sig ; then
- local file
- for file in ${A} ; do
- if [[ ${file} == ${MY_P}.tar.gz ]] ; then
- verify-sig_verify_detached "${DISTDIR}"/${file}
"${DISTDIR}"/${file}.sig
- else
- [[ ${file} ==
@(*${GENTOO_PATCH_NAME}.tar.xz|*.asc|*.sig) ]] && continue
-
- verify-sig_verify_detached "${DISTDIR}"/${file}
"${DISTDIR}"/${file}.asc
- fi
- done
- fi
-
- default
-}
-
-src_configure() {
- # bug #115036
- unset TERMINFO
-
- tc-export_build_env BUILD_{CC,CXX,CPP}
-
- # bug #214642
- BUILD_CPPFLAGS+=" -D_GNU_SOURCE"
-
- # Build the various variants of ncurses -- narrow, wide, and threaded.
#510440
- # Order matters here -- we want unicode/thread versions to come last so
that the
- # binaries in /usr/bin support both wide and narrow.
- # The naming is also important as we use these directly with filenames
and when
- # checking configure flags.
- NCURSES_TARGETS=(
- ncurses
- ncursesw
- ncursest
- ncursestw
- )
-
- # When installing ncurses, we have to use a compatible version of tic.
- # This comes up when cross-compiling, doing multilib builds, upgrading,
- # or installing for the first time. Build a local copy of tic whenever
- # the host version isn't available. bug #249363, bug #557598
- if ! has_version -b "~sys-libs/${P}:0" ; then
- local lbuildflags="-static"
-
- # some toolchains don't quite support static linking
- local dbuildflags="-Wl,-rpath,${WORKDIR}/lib"
- case ${CHOST} in
- *-darwin*) dbuildflags= ;;
- *-solaris*) dbuildflags="-Wl,-R,${WORKDIR}/lib" ;;
- esac
- echo "int main() {}" | \
- $(tc-getCC) -o x -x c - ${lbuildflags} -pipe >&
/dev/null \
- || lbuildflags="${dbuildflags}"
-
- # We can't re-use the multilib BUILD_DIR because we run outside
of it.
- BUILD_DIR="${WORKDIR}" \
- CC=${BUILD_CC} \
- CXX=${BUILD_CXX} \
- CPP=${BUILD_CPP} \
- CHOST=${CBUILD} \
- CFLAGS=${BUILD_CFLAGS} \
- CXXFLAGS=${BUILD_CXXFLAGS} \
- CPPFLAGS=${BUILD_CPPFLAGS} \
- LDFLAGS="${BUILD_LDFLAGS} ${lbuildflags}" \
- do_configure cross --without-shared --with-normal --with-progs
--without-ada
- fi
- multilib-minimal_src_configure
-}
-
-multilib_src_configure() {
- if [[ ${ABI} == x86 ]] ; then
- # For compatibility with older binaries at slight performance
cost.
- # bug #616402
- use stack-realign && append-flags -mstackrealign
- fi
-
- local t
- for t in "${NCURSES_TARGETS[@]}" ; do
- do_configure "${t}"
- done
-}
-
-do_configure() {
- local target=$1
- shift
-
- mkdir "${BUILD_DIR}/${target}" || die
- cd "${BUILD_DIR}/${target}" || die
-
- local conf=(
- # We need the basic terminfo files in /etc, bug #37026. We will
- # add '--with-terminfo-dirs' and then populate /etc/terminfo in
- # src_install() ...
-
--with-terminfo-dirs="${EPREFIX}/etc/terminfo:${EPREFIX}/usr/share/terminfo"
-
- # Enable installation of .pc files.
- --enable-pc-files
- # This path is used to control where the .pc files are
installed.
-
--with-pkg-config-libdir="${EPREFIX}/usr/$(get_libdir)/pkgconfig"
-
- # Now the rest of the various standard flags.
- --with-shared
- --enable-fvisibility
- # (Originally disabled until bug #245417 is sorted out, but now
- # just keeping it off for good, given nobody needed it until now
- # (2022) and we're trying to phase out bdb.)
- --without-hashed-db
- $(use_with ada)
- $(use_with cxx)
- $(use_with cxx cxx-binding)
- --with-cxx-shared
- $(use_with debug)
- $(use_with profile)
- # The configure script uses ldd to parse the linked output which
- # is flaky for cross-compiling/multilib/ldd versions/etc...
- $(use_with gpm gpm libgpm.so.1)
-
- # bug #930806
- --disable-setuid-environ
- # TODO: Maybe do these for USE=hardened
- #--disable-root-access
- #--disable-root-environ
-
- --disable-term-driver
- --disable-termcap
- --enable-symlinks
- --with-manpage-format=normal
- --enable-const
- --enable-colorfgbg
- --enable-hard-tabs
- --enable-echo
- $(use_enable !ada warnings)
- $(use_with debug assertions)
- $(use_enable !debug leaks)
- $(use_with debug expanded)
- $(use_with !debug macros)
- $(multilib_native_with progs)
- $(use_with test tests)
- $(use_with trace)
- $(use_with tinfo termlib)
- --disable-stripping
- --disable-pkg-ldflags
- )
-
- if [[ ${target} == ncurses*w ]] ; then
- conf+=( --enable-widec )
- else
- conf+=( --disable-widec )
- fi
- if [[ ${target} == ncursest* ]] ; then
- conf+=( --with-{pthread,reentrant} )
- else
- conf+=( --without-{pthread,reentrant} )
- fi
-
- # Make sure each variant goes in a unique location.
- if [[ ${target} == "ncurses" ]] ; then
- # "ncurses" variant goes into "${EPREFIX}"/usr/include
- # It is needed on Prefix because the configure script appends
- # "ncurses" to "${prefix}/include" if "${prefix}" is not /usr.
- conf+=( --enable-overwrite )
- else
- conf+=( --includedir="${EPREFIX}"/usr/include/${target} )
- fi
- # See comments in src_configure.
- if [[ ${target} != "cross" ]] ; then
- local cross_path="${WORKDIR}/cross"
- [[ -d ${cross_path} ]] && export
TIC_PATH="${cross_path}/progs/tic"
- fi
-
- ECONF_SOURCE="${S}" econf "${conf[@]}" "$@"
-}
-
-src_compile() {
- # See comments in src_configure.
- if ! has_version -b "~sys-libs/${P}:0" ; then
- BUILD_DIR="${WORKDIR}" do_compile cross -C progs
tic$(get_exeext)
- fi
-
- multilib-minimal_src_compile
-}
-
-multilib_src_compile() {
- local t
- for t in "${NCURSES_TARGETS[@]}" ; do
- do_compile "${t}"
- done
-}
-
-do_compile() {
- local target=$1
- shift
-
- cd "${BUILD_DIR}/${target}" || die
-
- # A little hack to fix parallel builds ... they break when
- # generating sources so if we generate the sources first (in
- # non-parallel), we can then build the rest of the package
- # in parallel. This is not really a perf hit since the source
- # generation is quite small.
- emake -j1 sources
-
- # For some reason, sources depends on pc-files which depends on
- # compiled libraries which depends on sources which ...
- # Manually delete the pc-files file so the install step will
- # create the .pc files we want.
- rm -f misc/pc-files || die
- emake "$@"
-}
-
-multilib_src_install() {
- local target
- for target in "${NCURSES_TARGETS[@]}" ; do
- emake -C "${BUILD_DIR}/${target}" DESTDIR="${D}" install
- done
-
- # Move main libraries into /.
- if multilib_is_native_abi ; then
- gen_usr_ldscript -a \
- "${NCURSES_TARGETS[@]}" \
- $(usex tinfo 'tinfow tinfo' '')
- fi
-
- # Don't delete '*.dll.a', needed for linking, bug #631468
- if ! use static-libs; then
- find "${ED}"/usr/ -name '*.a' ! -name '*.dll.a' -delete || die
- fi
-
- # Build fails to create this ...
- # -FIXME-
- # Ugly hackaround for riscv having two parts libdir (bug #689240)
- # Replace this hack with an official solution once we have one...
- # -FIXME-
- dosym $(sed 's@[^/]\+@..@g' <<< $(get_libdir))/share/terminfo \
- /usr/$(get_libdir)/terminfo
-
- # Remove obsolete libcurses symlink that is created by the build
- # system. Technically, this could be also achieved
- # via --disable-overwrite but it also moves headers implicitly,
- # and we do not want to do this yet.
- # bug #836696
- rm "${ED}"/usr/$(get_libdir)/libcurses* || die
-}
-
-multilib_src_install_all() {
- local terms=(
- # Dumb/simple values that show up when using the in-kernel VT.
- ansi console dumb linux
- vt{52,100,102,200,220}
- # [u]rxvt users used to be pretty common. Probably should drop
this
- # since upstream is dead and people are moving away from it.
- rxvt{,-unicode}{,-256color}
- # xterm users are common, as is terminals re-using/spoofing it.
- xterm xterm-{,256}color
- # screen is common (and reused by tmux).
- screen{,-256color}
- screen.xterm-256color
- )
- if use split-usr ; then
- local x
- # We need the basic terminfo files in /etc for
embedded/recovery, bug #37026
- einfo "Installing basic terminfo files in /etc..."
- for x in "${terms[@]}"; do
- local termfile=$(find "${ED}"/usr/share/terminfo/ -name
"${x}" 2>/dev/null)
- local basedir=$(basename "$(dirname "${termfile}")")
-
- if [[ -n ${termfile} ]] ; then
- dodir "/etc/terminfo/${basedir}"
- mv "${termfile}"
"${ED}/etc/terminfo/${basedir}/" || die
- dosym
"../../../../etc/terminfo/${basedir}/${x}" \
- "/usr/share/terminfo/${basedir}/${x}"
- fi
- done
-
- echo "CONFIG_PROTECT_MASK=\"/etc/terminfo\"" | newenvd -
50ncurses
-
- use minimal && rm -r "${ED}"/usr/share/terminfo*
- # Because ncurses5-config --terminfo returns the directory we
keep it
- # bug #245374
- keepdir /usr/share/terminfo
- elif use minimal ; then
- # Keep only the basic terminfo files
- find "${ED}"/usr/share/terminfo/ \
- \( -type f -o -type l \) ${terms[*]/#/! -name } -delete
, \
- -type d -empty -delete || die
- fi
-
- cd "${S}" || die
- dodoc ANNOUNCE MANIFEST NEWS README* TO-DO doc/*.doc
- if use doc ; then
- docinto html
- dodoc -r doc/html/
- fi
-}
-
-pkg_preinst() {
- preserve_old_lib /$(get_libdir)/libncurses.so.5
- preserve_old_lib /$(get_libdir)/libncursesw.so.5
-}
-
-pkg_postinst() {
- preserve_old_lib_notify /$(get_libdir)/libncurses.so.5
- preserve_old_lib_notify /$(get_libdir)/libncursesw.so.5
-}
diff --git a/sys-libs/ncurses/ncurses-6.5_p20250118.ebuild
b/sys-libs/ncurses/ncurses-6.5_p20250118.ebuild
deleted file mode 100644
index 4475535dc262..000000000000
--- a/sys-libs/ncurses/ncurses-6.5_p20250118.ebuild
+++ /dev/null
@@ -1,473 +0,0 @@
-# Copyright 1999-2025 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=8
-
-# sys-libs/ncurses-compat can be bumped with sys-libs/ncurses as upstream
-# provide a configure option for the ABI version.
-
-VERIFY_SIG_OPENPGP_KEY_PATH=/usr/share/openpgp-keys/thomasdickey.asc
-inherit flag-o-matic toolchain-funcs multilib multilib-minimal preserve-libs
usr-ldscript verify-sig
-
-MY_PV="${PV:0:3}"
-MY_P="${PN}-${MY_PV}"
-DESCRIPTION="Console display library"
-HOMEPAGE="https://www.gnu.org/software/ncurses/
https://invisible-island.net/ncurses/";
-# Keep invisible-mirror.net here as some users reported 403 forbidden with
invisible-island.net
-SRC_URI="
- mirror://gnu/ncurses/${MY_P}.tar.gz
- https://invisible-island.net/archives/${PN}/${MY_P}.tar.gz
- https://invisible-mirror.net/archives/${PN}/${MY_P}.tar.gz
- verify-sig? ( mirror://gnu/ncurses/${MY_P}.tar.gz.sig )
-"
-
-GENTOO_PATCH_DEV=sam
-GENTOO_PATCH_PV=6.5_p20250118
-GENTOO_PATCH_NAME=${PN}-${GENTOO_PATCH_PV}-patches
-
-# Populated below in a loop. Do not add patches manually here.
-UPSTREAM_PATCHES=()
-
-if [[ ${PV} == *_p* ]] ; then
- # Sometimes, after releases, there's no megapatch available yet.
- #
- # From upstream README at e.g.
https://invisible-island.net/archives/ncurses/6.3/:
- #
- # "At times (generally to mark a relatively stable point), I
create a rollup
- # patch, which consists of all changes from the release through
the current date."
- #
- # Also, from
https://lists.gnu.org/archive/html/bug-ncurses/2019-08/msg00039.html,
- # the patches are considered to be acceptable to use after some
testing. They
- # are both for development but also bug fixes.
- #
- # This array should contain a list of all the snapshots since the last
- # release if there's no megapatch available yet.
- PATCH_DATES=(
- 20240504
- 20240511
- 20240518
- 20240519
- 20240525
- 20240601
- 20240608
- 20240615
- 20240622
- 20240629
- 20240706
- 20240713
- 20240720
- 20240727
- 20240810
- 20240817
- 20240824
- 20240831
- 20240914
- 20240922
- 20240928
- 20241006
- 20241019
- 20241026
- 20241102
- 20241109
- 20241123
- 20241130
- 20241207
- 20241214
- 20241221
- 20241228
- 20250104
- 20250111
-
- # Latest patch is just _pN = $(ver_cut 4)
- $(ver_cut 4)
- )
-
- if [[ -z ${PATCH_DATES[@]} ]] ; then
- SRC_URI+="
https://invisible-island.net/archives/${PN}/${PV/_p*}/${MY_P/_p/-}.patch.sh.gz";
- SRC_URI+=" verify-sig? (
https://invisible-island.net/archives/${PN}/${PV/_p*}/${MY_P/_p/-}.patch.sh.gz.asc";
-
- # If we have a rollup patch, use that instead of the individual
ones.
- UPSTREAM_PATCHES+=( patch.sh )
- else
- # We use a mirror as well because we've had reports of 403
forbidden for some users.
-
upstream_url_base="https://invisible-island.net/archives/${PN}/${PV/_p*}/${MY_P}-";
-
upstream_m_url_base="https://invisible-mirror.net/archives/${PN}/${PV/_p*}/${MY_P}-";
-
- # Prefix each date with the upstream location
(https://invisible-island.net/archives/${PN}/${PV/_p*}/${MY_P})
- mangled_patches=( "${PATCH_DATES[@]/#/${upstream_url_base}}" )
- # Suffix each with .patch.gz
- mangled_patches=( "${mangled_patches[@]/%/.patch.gz}" )
- mangled_patches_sig=( "${mangled_patches[@]/%/.asc}" )
- # Repeat for .patch.gz.asc for verify-sig
- SRC_URI+=" ${mangled_patches[@]}"
- SRC_URI+=" verify-sig? ( ${mangled_patches_sig[@]} )"
-
- # For all of the URLs, chuck in invisible-island.net too:
- SRC_URI+="
${mangled_patches[@]/${upstream_url_base}/${upstream_m_url_base}}"
- SRC_URI+=" verify-sig? (
${mangled_patches_sig[@]/${upstream_url_base}/${upstream_m_url_base}} )"
-
- UPSTREAM_PATCHES=( "${PATCH_DATES[@]/%/.patch}" )
-
- unset upstream_url_base upstream_m_url_base mangled_patches
mangled_patches_sig
- fi
-fi
-
-SRC_URI+="
https://dev.gentoo.org/~${GENTOO_PATCH_DEV}/distfiles/${CATEGORY}/${PN}/${GENTOO_PATCH_NAME}.tar.xz";
-S="${WORKDIR}/${MY_P}"
-
-LICENSE="MIT"
-# The subslot reflects the SONAME.
-SLOT="0/6"
-KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~loong ~m68k ~mips ~ppc ~ppc64
~riscv ~s390 ~sparc ~x86 ~amd64-linux ~x86-linux ~arm64-macos ~ppc-macos
~x64-macos ~x64-solaris"
-IUSE="ada +cxx debug doc gpm minimal profile split-usr +stack-realign
static-libs test tinfo trace"
-# In 6.5_p20250118, the C++ examples fail to link, but there's no automated
-# testsuite anyway. Controlling building examples isn't really what USE=test
-# is for. Just restrict them.
-RESTRICT="!test? ( test ) test"
-
-# TODO: ncurses allows (and we take advantage of this, even) passing
-# the SONAME for dlopen() use, so only the header is needed at build time.
-# Maybe we should bundle a copy of gpm.h so we can move gpm to PDEPEND
-# which would be far nicer UX-wise.
-DEPEND="gpm? ( sys-libs/gpm[${MULTILIB_USEDEP}] )"
-# Block the older ncurses that installed all files w/SLOT=5, bug #557472
-RDEPEND="
- ${DEPEND}
- !<=sys-libs/ncurses-5.9-r4:5
- !<sys-libs/slang-2.3.2_pre23
- !<x11-terms/rxvt-unicode-9.06-r3
- !<x11-terms/st-0.6-r1
- !minimal? ( !<x11-terms/ghostty-1.1.0 )
-"
-BDEPEND="verify-sig? ( sec-keys/openpgp-keys-thomasdickey )"
-
-PATCHES=(
- "${UPSTREAM_PATCHES[@]/#/${WORKDIR}/${MY_P}-}"
-
- # When rebasing Gentoo's patchset, please use git from a clean
- # src_prepare with upstream patches already applied. git am --reject
- # the existing patchset and rebase as required. This makes it easier
- # to manage future rebasing & adding new patches.
- #
- # For the same reasons, please include the original configure.in
changes,
- # NOT just the generated results!
- "${WORKDIR}"/${GENTOO_PATCH_NAME}
-)
-
-src_unpack() {
- # Avoid trying to verify our own patchset tarball, there's no point
- if use verify-sig ; then
- local file
- for file in ${A} ; do
- if [[ ${file} == ${MY_P}.tar.gz ]] ; then
- verify-sig_verify_detached "${DISTDIR}"/${file}
"${DISTDIR}"/${file}.sig
- else
- [[ ${file} ==
@(*${GENTOO_PATCH_NAME}.tar.xz|*.asc|*.sig) ]] && continue
-
- verify-sig_verify_detached "${DISTDIR}"/${file}
"${DISTDIR}"/${file}.asc
- fi
- done
- fi
-
- default
-}
-
-src_configure() {
- # bug #115036
- unset TERMINFO
-
- tc-export_build_env BUILD_{CC,CXX,CPP}
-
- # bug #214642
- BUILD_CPPFLAGS+=" -D_GNU_SOURCE"
-
- # NCURSES_BOOL confusion, see
https://lists.gnu.org/archive/html/bug-ncurses/2024-11/msg00010.html
- append-cflags $(test-flags-CC -std=gnu17)
-
- # Build the various variants of ncurses -- narrow, wide, and threaded.
#510440
- # Order matters here -- we want unicode/thread versions to come last so
that the
- # binaries in /usr/bin support both wide and narrow.
- # The naming is also important as we use these directly with filenames
and when
- # checking configure flags.
- NCURSES_TARGETS=(
- ncurses
- ncursesw
- ncursest
- ncursestw
- )
-
- # When installing ncurses, we have to use a compatible version of tic.
- # This comes up when cross-compiling, doing multilib builds, upgrading,
- # or installing for the first time. Build a local copy of tic whenever
- # the host version isn't available. bug #249363, bug #557598
- if ! has_version -b "~sys-libs/${P}:0" ; then
- local lbuildflags="-static"
-
- # some toolchains don't quite support static linking
- local dbuildflags="-Wl,-rpath,${WORKDIR}/lib"
- case ${CHOST} in
- *-darwin*) dbuildflags= ;;
- *-solaris*) dbuildflags="-Wl,-R,${WORKDIR}/lib" ;;
- esac
- echo "int main() {}" | \
- $(tc-getCC) -o x -x c - ${lbuildflags} -pipe >&
/dev/null \
- || lbuildflags="${dbuildflags}"
-
- # We can't re-use the multilib BUILD_DIR because we run outside
of it.
- BUILD_DIR="${WORKDIR}" \
- CC=${BUILD_CC} \
- CXX=${BUILD_CXX} \
- CPP=${BUILD_CPP} \
- CHOST=${CBUILD} \
- CFLAGS=${BUILD_CFLAGS} \
- CXXFLAGS=${BUILD_CXXFLAGS} \
- CPPFLAGS=${BUILD_CPPFLAGS} \
- LDFLAGS="${BUILD_LDFLAGS} ${lbuildflags}" \
- do_configure cross --without-shared --with-normal --with-progs
--without-ada
- fi
- multilib-minimal_src_configure
-}
-
-multilib_src_configure() {
- if [[ ${ABI} == x86 ]] ; then
- # For compatibility with older binaries at slight performance
cost.
- # bug #616402
- use stack-realign && append-flags -mstackrealign
- fi
-
- local t
- for t in "${NCURSES_TARGETS[@]}" ; do
- do_configure "${t}"
- done
-}
-
-do_configure() {
- local target=$1
- shift
-
- mkdir "${BUILD_DIR}/${target}" || die
- cd "${BUILD_DIR}/${target}" || die
-
- local conf=(
- # We need the basic terminfo files in /etc, bug #37026. We will
- # add '--with-terminfo-dirs' and then populate /etc/terminfo in
- # src_install() ...
-
--with-terminfo-dirs="${EPREFIX}/etc/terminfo:${EPREFIX}/usr/share/terminfo"
-
- # Enable installation of .pc files.
- --enable-pc-files
- # This path is used to control where the .pc files are
installed.
-
--with-pkg-config-libdir="${EPREFIX}/usr/$(get_libdir)/pkgconfig"
-
- # Now the rest of the various standard flags.
- --with-shared
- --enable-fvisibility
- # (Originally disabled until bug #245417 is sorted out, but now
- # just keeping it off for good, given nobody needed it until now
- # (2022) and we're trying to phase out bdb.)
- --without-hashed-db
- $(use_with ada)
- $(use_with cxx)
- $(use_with cxx cxx-binding)
- --with-cxx-shared
- $(use_with debug)
- $(use_with profile)
- # The configure script uses ldd to parse the linked output which
- # is flaky for cross-compiling/multilib/ldd versions/etc...
- $(use_with gpm gpm libgpm.so.1)
-
- # bug #930806
- --disable-setuid-environ
- # TODO: Maybe do these for USE=hardened
- #--disable-root-access
- #--disable-root-environ
-
- --disable-termcap
- --enable-symlinks
- --with-manpage-format=normal
- --enable-const
- --enable-colorfgbg
- --enable-hard-tabs
- --enable-echo
- $(use_enable !ada warnings)
- $(use_with debug assertions)
- $(use_enable !debug leaks)
- $(use_with debug expanded)
- $(use_with !debug macros)
- $(multilib_native_with progs)
- $(use_with test tests)
- $(use_with trace)
- $(use_with tinfo termlib)
- --disable-stripping
- --disable-pkg-ldflags
- )
-
- case ${CHOST} in
- *-mingw32*)
- conf+=( --enable-term-driver )
- ;;
- *)
- conf+=( --disable-term-driver )
- ;;
- esac
-
- if [[ ${target} == ncurses*w ]] ; then
- conf+=( --enable-widec )
- else
- conf+=( --disable-widec )
- fi
- if [[ ${target} == ncursest* ]] ; then
- conf+=( --with-{pthread,reentrant} )
- else
- conf+=( --without-{pthread,reentrant} )
- fi
-
- # Make sure each variant goes in a unique location.
- if [[ ${target} == "ncurses" ]] ; then
- # "ncurses" variant goes into "${EPREFIX}"/usr/include
- # It is needed on Prefix because the configure script appends
- # "ncurses" to "${prefix}/include" if "${prefix}" is not /usr.
- conf+=( --enable-overwrite )
- else
- conf+=( --includedir="${EPREFIX}"/usr/include/${target} )
- fi
- # See comments in src_configure.
- if [[ ${target} != "cross" ]] ; then
- local cross_path="${WORKDIR}/cross"
- [[ -d ${cross_path} ]] && export
TIC_PATH="${cross_path}/progs/tic"
- fi
-
- ECONF_SOURCE="${S}" econf "${conf[@]}" "$@"
-}
-
-src_compile() {
- # See comments in src_configure.
- if ! has_version -b "~sys-libs/${P}:0" ; then
- BUILD_DIR="${WORKDIR}" do_compile cross -C progs
tic$(get_exeext)
- fi
-
- multilib-minimal_src_compile
-}
-
-multilib_src_compile() {
- local t
- for t in "${NCURSES_TARGETS[@]}" ; do
- do_compile "${t}"
- done
-}
-
-do_compile() {
- local target=$1
- shift
-
- cd "${BUILD_DIR}/${target}" || die
-
- # A little hack to fix parallel builds ... they break when
- # generating sources so if we generate the sources first (in
- # non-parallel), we can then build the rest of the package
- # in parallel. This is not really a perf hit since the source
- # generation is quite small.
- emake -j1 sources
-
- # For some reason, sources depends on pc-files which depends on
- # compiled libraries which depends on sources which ...
- # Manually delete the pc-files file so the install step will
- # create the .pc files we want.
- rm -f misc/pc-files || die
- emake "$@"
-}
-
-multilib_src_install() {
- local target
- for target in "${NCURSES_TARGETS[@]}" ; do
- emake -C "${BUILD_DIR}/${target}" DESTDIR="${D}" install
- done
-
- # Move main libraries into /.
- if multilib_is_native_abi ; then
- gen_usr_ldscript -a \
- "${NCURSES_TARGETS[@]}" \
- $(usex tinfo 'tinfow tinfo' '')
- fi
-
- # Don't delete '*.dll.a', needed for linking, bug #631468
- if ! use static-libs; then
- find "${ED}"/usr/ -name '*.a' ! -name '*.dll.a' -delete || die
- fi
-
- # Build fails to create this ...
- # -FIXME-
- # Ugly hackaround for riscv having two parts libdir (bug #689240)
- # Replace this hack with an official solution once we have one...
- # -FIXME-
- dosym $(sed 's@[^/]\+@..@g' <<< $(get_libdir))/share/terminfo \
- /usr/$(get_libdir)/terminfo
-
- # Remove obsolete libcurses symlink that is created by the build
- # system. Technically, this could be also achieved
- # via --disable-overwrite but it also moves headers implicitly,
- # and we do not want to do this yet.
- # bug #836696
- rm "${ED}"/usr/$(get_libdir)/libcurses* || die
-}
-
-multilib_src_install_all() {
- local terms=(
- # Dumb/simple values that show up when using the in-kernel VT.
- ansi console dumb linux
- vt{52,100,102,200,220}
- # [u]rxvt users used to be pretty common. Probably should drop
this
- # since upstream is dead and people are moving away from it.
- rxvt{,-unicode}{,-256color}
- # xterm users are common, as is terminals re-using/spoofing it.
- xterm xterm-{,256}color
- # screen is common (and reused by tmux).
- screen{,-256color}
- screen.xterm-256color
- )
- if use split-usr ; then
- local x
- # We need the basic terminfo files in /etc for
embedded/recovery, bug #37026
- einfo "Installing basic terminfo files in /etc..."
- for x in "${terms[@]}"; do
- local termfile=$(find "${ED}"/usr/share/terminfo/ -name
"${x}" 2>/dev/null)
- local basedir=$(basename "$(dirname "${termfile}")")
-
- if [[ -n ${termfile} ]] ; then
- dodir "/etc/terminfo/${basedir}"
- mv "${termfile}"
"${ED}/etc/terminfo/${basedir}/" || die
- dosym
"../../../../etc/terminfo/${basedir}/${x}" \
- "/usr/share/terminfo/${basedir}/${x}"
- fi
- done
-
- echo "CONFIG_PROTECT_MASK=\"/etc/terminfo\"" | newenvd -
50ncurses
-
- use minimal && rm -r "${ED}"/usr/share/terminfo*
- # Because ncurses5-config --terminfo returns the directory we
keep it
- # bug #245374
- keepdir /usr/share/terminfo
- elif use minimal ; then
- # Keep only the basic terminfo files
- find "${ED}"/usr/share/terminfo/ \
- \( -type f -o -type l \) ${terms[*]/#/! -name } -delete
, \
- -type d -empty -delete || die
- fi
-
- cd "${S}" || die
- dodoc ANNOUNCE MANIFEST NEWS README* TO-DO doc/*.doc
- if use doc ; then
- docinto html
- dodoc -r doc/html/
- fi
-}
-
-pkg_preinst() {
- preserve_old_lib /$(get_libdir)/libncurses.so.5
- preserve_old_lib /$(get_libdir)/libncursesw.so.5
-}
-
-pkg_postinst() {
- preserve_old_lib_notify /$(get_libdir)/libncurses.so.5
- preserve_old_lib_notify /$(get_libdir)/libncursesw.so.5
-}
diff --git a/sys-libs/ncurses/ncurses-6.5_p20250301.ebuild
b/sys-libs/ncurses/ncurses-6.5_p20250301.ebuild
deleted file mode 100644
index 526b1ec16831..000000000000
--- a/sys-libs/ncurses/ncurses-6.5_p20250301.ebuild
+++ /dev/null
@@ -1,480 +0,0 @@
-# Copyright 1999-2025 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=8
-
-# sys-libs/ncurses-compat can be bumped with sys-libs/ncurses as upstream
-# provide a configure option for the ABI version.
-
-VERIFY_SIG_OPENPGP_KEY_PATH=/usr/share/openpgp-keys/thomasdickey.asc
-inherit flag-o-matic toolchain-funcs multilib multilib-minimal preserve-libs
usr-ldscript verify-sig
-
-MY_PV="${PV:0:3}"
-MY_P="${PN}-${MY_PV}"
-DESCRIPTION="Console display library"
-HOMEPAGE="https://www.gnu.org/software/ncurses/
https://invisible-island.net/ncurses/";
-# Keep invisible-mirror.net here as some users reported 403 forbidden with
invisible-island.net
-SRC_URI="
- mirror://gnu/ncurses/${MY_P}.tar.gz
- https://invisible-island.net/archives/${PN}/${MY_P}.tar.gz
- https://invisible-mirror.net/archives/${PN}/${MY_P}.tar.gz
- verify-sig? ( mirror://gnu/ncurses/${MY_P}.tar.gz.sig )
-"
-
-GENTOO_PATCH_DEV=sam
-GENTOO_PATCH_PV=6.5_p20250301
-GENTOO_PATCH_NAME=${PN}-${GENTOO_PATCH_PV}-patches
-
-# Populated below in a loop. Do not add patches manually here.
-UPSTREAM_PATCHES=()
-
-if [[ ${PV} == *_p* ]] ; then
- # Sometimes, after releases, there's no megapatch available yet.
- #
- # From upstream README at e.g.
https://invisible-island.net/archives/ncurses/6.3/:
- #
- # "At times (generally to mark a relatively stable point), I
create a rollup
- # patch, which consists of all changes from the release through
the current date."
- #
- # Also, from
https://lists.gnu.org/archive/html/bug-ncurses/2019-08/msg00039.html,
- # the patches are considered to be acceptable to use after some
testing. They
- # are both for development but also bug fixes.
- #
- # This array should contain a list of all the snapshots since the last
- # release if there's no megapatch available yet.
- PATCH_DATES=(
- 20240504
- 20240511
- 20240518
- 20240519
- 20240525
- 20240601
- 20240608
- 20240615
- 20240622
- 20240629
- 20240706
- 20240713
- 20240720
- 20240727
- 20240810
- 20240817
- 20240824
- 20240831
- 20240914
- 20240922
- 20240928
- 20241006
- 20241019
- 20241026
- 20241102
- 20241109
- 20241123
- 20241130
- 20241207
- 20241214
- 20241221
- 20241228
- 20250104
- 20250111
- 20250118
- 20250125
- 20250201
- 20250208
- 20250215
- 20250216
- 20250222
-
- # Latest patch is just _pN = $(ver_cut 4)
- $(ver_cut 4)
- )
-
- if [[ -z ${PATCH_DATES[@]} ]] ; then
- SRC_URI+="
https://invisible-island.net/archives/${PN}/${PV/_p*}/${MY_P/_p/-}.patch.sh.gz";
- SRC_URI+=" verify-sig? (
https://invisible-island.net/archives/${PN}/${PV/_p*}/${MY_P/_p/-}.patch.sh.gz.asc";
-
- # If we have a rollup patch, use that instead of the individual
ones.
- UPSTREAM_PATCHES+=( patch.sh )
- else
- # We use a mirror as well because we've had reports of 403
forbidden for some users.
-
upstream_url_base="https://invisible-island.net/archives/${PN}/${PV/_p*}/${MY_P}-";
-
upstream_m_url_base="https://invisible-mirror.net/archives/${PN}/${PV/_p*}/${MY_P}-";
-
- # Prefix each date with the upstream location
(https://invisible-island.net/archives/${PN}/${PV/_p*}/${MY_P})
- mangled_patches=( "${PATCH_DATES[@]/#/${upstream_url_base}}" )
- # Suffix each with .patch.gz
- mangled_patches=( "${mangled_patches[@]/%/.patch.gz}" )
- mangled_patches_sig=( "${mangled_patches[@]/%/.asc}" )
- # Repeat for .patch.gz.asc for verify-sig
- SRC_URI+=" ${mangled_patches[@]}"
- SRC_URI+=" verify-sig? ( ${mangled_patches_sig[@]} )"
-
- # For all of the URLs, chuck in invisible-island.net too:
- SRC_URI+="
${mangled_patches[@]/${upstream_url_base}/${upstream_m_url_base}}"
- SRC_URI+=" verify-sig? (
${mangled_patches_sig[@]/${upstream_url_base}/${upstream_m_url_base}} )"
-
- UPSTREAM_PATCHES=( "${PATCH_DATES[@]/%/.patch}" )
-
- unset upstream_url_base upstream_m_url_base mangled_patches
mangled_patches_sig
- fi
-fi
-
-SRC_URI+="
https://dev.gentoo.org/~${GENTOO_PATCH_DEV}/distfiles/${CATEGORY}/${PN}/${GENTOO_PATCH_NAME}.tar.xz";
-S="${WORKDIR}/${MY_P}"
-
-LICENSE="MIT"
-# The subslot reflects the SONAME.
-SLOT="0/6"
-KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~loong ~m68k ~mips ~ppc ~ppc64
~riscv ~s390 ~sparc ~x86 ~amd64-linux ~x86-linux ~arm64-macos ~ppc-macos
~x64-macos ~x64-solaris"
-IUSE="ada +cxx debug doc gpm minimal profile split-usr +stack-realign
static-libs test tinfo trace"
-# In 6.5_p20250118, the C++ examples fail to link, but there's no automated
-# testsuite anyway. Controlling building examples isn't really what USE=test
-# is for. Just restrict them.
-RESTRICT="!test? ( test ) test"
-
-# TODO: ncurses allows (and we take advantage of this, even) passing
-# the SONAME for dlopen() use, so only the header is needed at build time.
-# Maybe we should bundle a copy of gpm.h so we can move gpm to PDEPEND
-# which would be far nicer UX-wise.
-DEPEND="gpm? ( sys-libs/gpm[${MULTILIB_USEDEP}] )"
-# Block the older ncurses that installed all files w/SLOT=5, bug #557472
-RDEPEND="
- ${DEPEND}
- !<=sys-libs/ncurses-5.9-r4:5
- !<sys-libs/slang-2.3.2_pre23
- !<x11-terms/rxvt-unicode-9.06-r3
- !<x11-terms/st-0.6-r1
- !minimal? ( !<x11-terms/ghostty-1.1.0 )
-"
-BDEPEND="verify-sig? ( sec-keys/openpgp-keys-thomasdickey )"
-
-PATCHES=(
- "${UPSTREAM_PATCHES[@]/#/${WORKDIR}/${MY_P}-}"
-
- # When rebasing Gentoo's patchset, please use git from a clean
- # src_prepare with upstream patches already applied. git am --reject
- # the existing patchset and rebase as required. This makes it easier
- # to manage future rebasing & adding new patches.
- #
- # For the same reasons, please include the original configure.in
changes,
- # NOT just the generated results!
- "${WORKDIR}"/${GENTOO_PATCH_NAME}
-)
-
-src_unpack() {
- # Avoid trying to verify our own patchset tarball, there's no point
- if use verify-sig ; then
- local file
- for file in ${A} ; do
- if [[ ${file} == ${MY_P}.tar.gz ]] ; then
- verify-sig_verify_detached "${DISTDIR}"/${file}
"${DISTDIR}"/${file}.sig
- else
- [[ ${file} ==
@(*${GENTOO_PATCH_NAME}.tar.xz|*.asc|*.sig) ]] && continue
-
- verify-sig_verify_detached "${DISTDIR}"/${file}
"${DISTDIR}"/${file}.asc
- fi
- done
- fi
-
- default
-}
-
-src_configure() {
- # bug #115036
- unset TERMINFO
-
- tc-export_build_env BUILD_{CC,CXX,CPP}
-
- # bug #214642
- BUILD_CPPFLAGS+=" -D_GNU_SOURCE"
-
- # NCURSES_BOOL confusion, see
https://lists.gnu.org/archive/html/bug-ncurses/2024-11/msg00010.html
- append-cflags $(test-flags-CC -std=gnu17)
-
- # Build the various variants of ncurses -- narrow, wide, and threaded.
#510440
- # Order matters here -- we want unicode/thread versions to come last so
that the
- # binaries in /usr/bin support both wide and narrow.
- # The naming is also important as we use these directly with filenames
and when
- # checking configure flags.
- NCURSES_TARGETS=(
- ncurses
- ncursesw
- ncursest
- ncursestw
- )
-
- # When installing ncurses, we have to use a compatible version of tic.
- # This comes up when cross-compiling, doing multilib builds, upgrading,
- # or installing for the first time. Build a local copy of tic whenever
- # the host version isn't available. bug #249363, bug #557598
- if ! has_version -b "~sys-libs/${P}:0" ; then
- local lbuildflags="-static"
-
- # some toolchains don't quite support static linking
- local dbuildflags="-Wl,-rpath,${WORKDIR}/lib"
- case ${CHOST} in
- *-darwin*) dbuildflags= ;;
- *-solaris*) dbuildflags="-Wl,-R,${WORKDIR}/lib" ;;
- esac
- echo "int main() {}" | \
- $(tc-getCC) -o x -x c - ${lbuildflags} -pipe >&
/dev/null \
- || lbuildflags="${dbuildflags}"
-
- # We can't re-use the multilib BUILD_DIR because we run outside
of it.
- BUILD_DIR="${WORKDIR}" \
- CC=${BUILD_CC} \
- CXX=${BUILD_CXX} \
- CPP=${BUILD_CPP} \
- CHOST=${CBUILD} \
- CFLAGS=${BUILD_CFLAGS} \
- CXXFLAGS=${BUILD_CXXFLAGS} \
- CPPFLAGS=${BUILD_CPPFLAGS} \
- LDFLAGS="${BUILD_LDFLAGS} ${lbuildflags}" \
- do_configure cross --without-shared --with-normal --with-progs
--without-ada
- fi
- multilib-minimal_src_configure
-}
-
-multilib_src_configure() {
- if [[ ${ABI} == x86 ]] ; then
- # For compatibility with older binaries at slight performance
cost.
- # bug #616402
- use stack-realign && append-flags -mstackrealign
- fi
-
- local t
- for t in "${NCURSES_TARGETS[@]}" ; do
- do_configure "${t}"
- done
-}
-
-do_configure() {
- local target=$1
- shift
-
- mkdir "${BUILD_DIR}/${target}" || die
- cd "${BUILD_DIR}/${target}" || die
-
- local conf=(
- # We need the basic terminfo files in /etc, bug #37026. We will
- # add '--with-terminfo-dirs' and then populate /etc/terminfo in
- # src_install() ...
-
--with-terminfo-dirs="${EPREFIX}/etc/terminfo:${EPREFIX}/usr/share/terminfo"
-
- # Enable installation of .pc files.
- --enable-pc-files
- # This path is used to control where the .pc files are
installed.
-
--with-pkg-config-libdir="${EPREFIX}/usr/$(get_libdir)/pkgconfig"
-
- # Now the rest of the various standard flags.
- --with-shared
- --enable-fvisibility
- # (Originally disabled until bug #245417 is sorted out, but now
- # just keeping it off for good, given nobody needed it until now
- # (2022) and we're trying to phase out bdb.)
- --without-hashed-db
- $(use_with ada)
- $(use_with cxx)
- $(use_with cxx cxx-binding)
- --with-cxx-shared
- $(use_with debug)
- $(use_with profile)
- # The configure script uses ldd to parse the linked output which
- # is flaky for cross-compiling/multilib/ldd versions/etc...
- $(use_with gpm gpm libgpm.so.1)
-
- # bug #930806
- --disable-setuid-environ
- # TODO: Maybe do these for USE=hardened
- #--disable-root-access
- #--disable-root-environ
-
- --disable-termcap
- --enable-symlinks
- --with-manpage-format=normal
- --enable-const
- --enable-colorfgbg
- --enable-hard-tabs
- --enable-echo
- $(use_enable !ada warnings)
- $(use_with debug assertions)
- $(use_enable !debug leaks)
- $(use_with debug expanded)
- $(use_with !debug macros)
- $(multilib_native_with progs)
- $(use_with test tests)
- $(use_with trace)
- $(use_with tinfo termlib)
- --disable-stripping
- --disable-pkg-ldflags
- )
-
- case ${CHOST} in
- *-mingw32*)
- conf+=( --enable-term-driver )
- ;;
- *)
- conf+=( --disable-term-driver )
- ;;
- esac
-
- if [[ ${target} == ncurses*w ]] ; then
- conf+=( --enable-widec )
- else
- conf+=( --disable-widec )
- fi
- if [[ ${target} == ncursest* ]] ; then
- conf+=( --with-{pthread,reentrant} )
- else
- conf+=( --without-{pthread,reentrant} )
- fi
-
- # Make sure each variant goes in a unique location.
- if [[ ${target} == "ncurses" ]] ; then
- # "ncurses" variant goes into "${EPREFIX}"/usr/include
- # It is needed on Prefix because the configure script appends
- # "ncurses" to "${prefix}/include" if "${prefix}" is not /usr.
- conf+=( --enable-overwrite )
- else
- conf+=( --includedir="${EPREFIX}"/usr/include/${target} )
- fi
- # See comments in src_configure.
- if [[ ${target} != "cross" ]] ; then
- local cross_path="${WORKDIR}/cross"
- [[ -d ${cross_path} ]] && export
TIC_PATH="${cross_path}/progs/tic"
- fi
-
- ECONF_SOURCE="${S}" econf "${conf[@]}" "$@"
-}
-
-src_compile() {
- # See comments in src_configure.
- if ! has_version -b "~sys-libs/${P}:0" ; then
- BUILD_DIR="${WORKDIR}" do_compile cross -C progs
tic$(get_exeext)
- fi
-
- multilib-minimal_src_compile
-}
-
-multilib_src_compile() {
- local t
- for t in "${NCURSES_TARGETS[@]}" ; do
- do_compile "${t}"
- done
-}
-
-do_compile() {
- local target=$1
- shift
-
- cd "${BUILD_DIR}/${target}" || die
-
- # A little hack to fix parallel builds ... they break when
- # generating sources so if we generate the sources first (in
- # non-parallel), we can then build the rest of the package
- # in parallel. This is not really a perf hit since the source
- # generation is quite small.
- emake -j1 sources
-
- # For some reason, sources depends on pc-files which depends on
- # compiled libraries which depends on sources which ...
- # Manually delete the pc-files file so the install step will
- # create the .pc files we want.
- rm -f misc/pc-files || die
- emake "$@"
-}
-
-multilib_src_install() {
- local target
- for target in "${NCURSES_TARGETS[@]}" ; do
- emake -C "${BUILD_DIR}/${target}" DESTDIR="${D}" install
- done
-
- # Move main libraries into /.
- if multilib_is_native_abi ; then
- gen_usr_ldscript -a \
- "${NCURSES_TARGETS[@]}" \
- $(usex tinfo 'tinfow tinfo' '')
- fi
-
- # Don't delete '*.dll.a', needed for linking, bug #631468
- if ! use static-libs; then
- find "${ED}"/usr/ -name '*.a' ! -name '*.dll.a' -delete || die
- fi
-
- # Build fails to create this ...
- # -FIXME-
- # Ugly hackaround for riscv having two parts libdir (bug #689240)
- # Replace this hack with an official solution once we have one...
- # -FIXME-
- dosym $(sed 's@[^/]\+@..@g' <<< $(get_libdir))/share/terminfo \
- /usr/$(get_libdir)/terminfo
-
- # Remove obsolete libcurses symlink that is created by the build
- # system. Technically, this could be also achieved
- # via --disable-overwrite but it also moves headers implicitly,
- # and we do not want to do this yet.
- # bug #836696
- rm "${ED}"/usr/$(get_libdir)/libcurses* || die
-}
-
-multilib_src_install_all() {
- local terms=(
- # Dumb/simple values that show up when using the in-kernel VT.
- ansi console dumb linux
- vt{52,100,102,200,220}
- # [u]rxvt users used to be pretty common. Probably should drop
this
- # since upstream is dead and people are moving away from it.
- rxvt{,-unicode}{,-256color}
- # xterm users are common, as is terminals re-using/spoofing it.
- xterm xterm-{,256}color
- # screen is common (and reused by tmux).
- screen{,-256color}
- screen.xterm-256color
- )
- if use split-usr ; then
- local x
- # We need the basic terminfo files in /etc for
embedded/recovery, bug #37026
- einfo "Installing basic terminfo files in /etc..."
- for x in "${terms[@]}"; do
- local termfile=$(find "${ED}"/usr/share/terminfo/ -name
"${x}" 2>/dev/null)
- local basedir=$(basename "$(dirname "${termfile}")")
-
- if [[ -n ${termfile} ]] ; then
- dodir "/etc/terminfo/${basedir}"
- mv "${termfile}"
"${ED}/etc/terminfo/${basedir}/" || die
- dosym
"../../../../etc/terminfo/${basedir}/${x}" \
- "/usr/share/terminfo/${basedir}/${x}"
- fi
- done
-
- echo "CONFIG_PROTECT_MASK=\"/etc/terminfo\"" | newenvd -
50ncurses
-
- use minimal && rm -r "${ED}"/usr/share/terminfo*
- # Because ncurses5-config --terminfo returns the directory we
keep it
- # bug #245374
- keepdir /usr/share/terminfo
- elif use minimal ; then
- # Keep only the basic terminfo files
- find "${ED}"/usr/share/terminfo/ \
- \( -type f -o -type l \) ${terms[*]/#/! -name } -delete
, \
- -type d -empty -delete || die
- fi
-
- cd "${S}" || die
- dodoc ANNOUNCE MANIFEST NEWS README* TO-DO doc/*.doc
- if use doc ; then
- docinto html
- dodoc -r doc/html/
- fi
-}
-
-pkg_preinst() {
- preserve_old_lib /$(get_libdir)/libncurses.so.5
- preserve_old_lib /$(get_libdir)/libncursesw.so.5
-}
-
-pkg_postinst() {
- preserve_old_lib_notify /$(get_libdir)/libncurses.so.5
- preserve_old_lib_notify /$(get_libdir)/libncursesw.so.5
-}
