commit: c5c853f3a58c738075c351ded151c0f0a6ff3fed
Author: Chris Mayo <aklhfex <AT> gmail <DOT> com>
AuthorDate: Tue Oct 29 19:57:31 2024 +0000
Commit: Sam James <sam <AT> gentoo <DOT> org>
CommitDate: Sun Nov 24 20:24:24 2024 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=c5c853f3
media-gfx/freecad: Simplify USE flag creation, drop part-design, show and tux
Signed-off-by: Chris Mayo <aklhfex <AT> gmail.com>
Signed-off-by: Sam James <sam <AT> gentoo.org>
media-gfx/freecad/freecad-1.0.0-r1.ebuild | 39 +++++++------------------------
1 file changed, 9 insertions(+), 30 deletions(-)
diff --git a/media-gfx/freecad/freecad-1.0.0-r1.ebuild
b/media-gfx/freecad/freecad-1.0.0-r1.ebuild
index 4e44962c917c..2a6600b9cb2b 100644
--- a/media-gfx/freecad/freecad-1.0.0-r1.ebuild
+++ b/media-gfx/freecad/freecad-1.0.0-r1.ebuild
@@ -26,34 +26,13 @@ fi
# examples are licensed CC-BY-SA (without note of specific version)
LICENSE="LGPL-2 CC-BY-SA-4.0"
SLOT="0"
-IUSE="debug designer +gui qt5 spacenav test X"
-
-FREECAD_EXPERIMENTAL_MODULES="cloud netgen pcl"
-FREECAD_STABLE_MODULES="addonmgr fem idf inspection
- openscad part-design points robot show smesh
- surface techdraw tux"
-
-for module in ${FREECAD_STABLE_MODULES}; do
- IUSE="${IUSE} +${module}"
-done
-for module in ${FREECAD_EXPERIMENTAL_MODULES}; do
- IUSE="${IUSE} ${module}"
-done
-unset module
-
-# To get required dependencies:
+IUSE="debug designer +gui pcl qt5 smesh spacenav test X"
+# Modules are found in src/Mod/ and their options defined in:
+# cMake/FreeCAD_Helpers/InitializeFreeCADBuildOptions.cmake
+# To get their dependencies:
# 'grep REQUIRES_MODS cMake/FreeCAD_Helpers/CheckInterModuleDependencies.cmake'
-# We set the following requirements by default:
-# arch, draft, drawing, import, mesh, part, qt6, sketcher, spreadsheet, start,
web.
-#
-# Additionally, we auto-enable mesh_part, flat_mesh and smesh
-# Fem actually needs smesh, but as long as we don't have a smesh package, we
enable
-# smesh through the mesh USE flag. Note however, the fem<-smesh dependency
isn't
-# reflected by the REQUIRES_MODS macro, but at
-# cMake/FreeCAD_Helpers/InitializeFreeCADBuildOptions.cmake:187.
-#
-# The increase in auto-enabled workbenches is due to their need in parts of the
-# test suite when compiled with a minimal set of USE flags.
+IUSE+=" addonmgr cloud fem idf inspection netgen openscad points robot surface
techdraw"
+
REQUIRED_USE="
${PYTHON_REQUIRED_USE}
designer? ( gui )
@@ -222,20 +201,20 @@ src_configure() {
-DBUILD_MESH_PART=ON
-DBUILD_OPENSCAD=$(usex openscad)
-DBUILD_PART=ON
- -DBUILD_PART_DESIGN=$(usex part-design)
+ -DBUILD_PART_DESIGN=ON
-DBUILD_PLOT=ON
-DBUILD_POINTS=$(usex points)
-DBUILD_REVERSEENGINEERING=OFF # currently
only an empty sandbox
-DBUILD_ROBOT=$(usex robot)
-DBUILD_SANDBOX=OFF
- -DBUILD_SHOW=$(usex show)
+ -DBUILD_SHOW=$(usex gui)
-DBUILD_SKETCHER=ON
# needed by draft workspace
-DBUILD_SPREADSHEET=ON
-DBUILD_START=ON
-DBUILD_SURFACE=$(usex surface)
-DBUILD_TECHDRAW=$(usex techdraw)
-DBUILD_TEST=ON
# always build test workbench for run-time testing
- -DBUILD_TUX=$(usex tux)
+ -DBUILD_TUX=$(usex gui)
-DBUILD_WEB=ON
# needed by start workspace
-DCMAKE_INSTALL_DATADIR=/usr/share/${PN}/data
