apachemaven, 2009/3/27 apachemaven <apachema...@yeah.net>: > I want to translate the hdf4 to tif ,and use the grass to conert this tif to > its own format, then I can contiune my next work, I use the FWTools2.2.8 > (which is installed in the F disk.)to handle this,after config the > environment ,I run the command "gdalinfo > d:\data\HDF\MOD02HKM.A2008275.0245.005.2008275112555.hdf", it worked , the > key inofrmation is : > =============== > ................ > ................ > Subdatasets: > > SUBDATASET_1_NAME=HDF4_EOS:EOS_SWATH:"D:\data\HDF\MOD02HKM.A2008275.0245.005.2008275112555.hdf":MODIS_SWATH_Type_L1B:EV_500_RefSB > SUBDATASET_1_DESC=[5x4060x2708] EV_500_RefSB MODIS_SWATH_Type_L1B (16-bit > unsigned integer) > > SUBDATASET_2_NAME=HDF4_EOS:EOS_SWATH:"D:\data\HDF\MOD02HKM.A2008275.0245.005.2008275112555.hdf":MODIS_SWATH_Type_L1B:EV_500_RefSB_Uncert_Indexes > SUBDATASET_2_DESC=[5x4060x2708] EV_500_RefSB_Uncert_Indexes > MODIS_SWATH_Type_L1B (8-bit unsigned integer) > > SUBDATASET_3_NAME=HDF4_EOS:EOS_SWATH:"D:\data\HDF\MOD02HKM.A2008275.0245.005.2008275112555.hdf":MODIS_SWATH_Type_L1B:EV_250_Aggr500_RefSB > SUBDATASET_3_DESC=[2x4060x2708] EV_250_Aggr500_RefSB MODIS_SWATH_Type_L1B > (16-bit unsigned integer) > > SUBDATASET_4_NAME=HDF4_EOS:EOS_SWATH:"D:\data\HDF\MOD02HKM.A2008275.0245.005.2008275112555.hdf":MODIS_SWATH_Type_L1B:EV_250_Aggr500_RefSB_Uncert_Indexes > SUBDATASET_4_DESC=[2x4060x2708] EV_250_Aggr500_RefSB_Uncert_Indexes > MODIS_SWATH_Type_L1B (8-bit unsigned integer) > > SUBDATASET_5_NAME=HDF4_EOS:EOS_SWATH:"D:\data\HDF\MOD02HKM.A2008275.0245.005.2008275112555.hdf":MODIS_SWATH_Type_L1B:EV_250_Aggr500_RefSB_Samples_Used > SUBDATASET_5_DESC=[2x4060x2708] EV_250_Aggr500_RefSB_Samples_Used > MODIS_SWATH_Type_L1B (8-bit integer) > =============== > and now (for example )I want to get the subdataset 4,and translate it to > geotiff,before run the gdal_translate I run the gdalinfo again to get the > information of it:" > gdalinfo > HDF4_EOS:EOS_SWATH:"D:\data\HDF\MOD02HKM.A2008275.0245.005.2008275112555.hdf":MODIS_SWATH_Type_L1B:EV_250_Aggr500_RefSB_Uncert_Indexes" > I got the error messages as follows: > ======================== > C:\Documents and Settings\Administrator>gdalinfo > HDF4_EOS:EOS_SWATH:"D:\data\HDF\MOD02HKM.A2008275.0245.005.2008275112555.hdf":MODIS_SWATH_Type_L1B:EV_250_Aggr500_RefSB_Uncert_Indexes > ERROR 4: > `HDF4_EOS:EOS_SWATH:D:\data\HDF\MOD02HKM.A2008275.0245005.2008275112555.hdf:MODIS_SWATH_Type_L1B:EV_250_Aggr500_RefSB_Uncert_Indexes' > does not exist in the file system,and is not recognised as a supported > dataset name. > gdalinfo failed - unable to open > 'HDF4_EOS:EOS_SWATH:D:\data\HDF\MOD02HKM.A2008275.0245.005.20082751 > 12555.hdf:MODIS_SWATH_Type_L1B:EV_250_Aggr500_RefSB_Uncert_Indexes'.
Perhaps, the problem is with the colon (:) in the path. There may be some confusion with the path. Try to work around the colon by mounting the D drive on any other folder in the F drive and provide a relative path to the FWTools' bin folder. Let me know how it goes. > Open GDAL Datasets: > 1 N DriverIsNULL -1 512x512x0 > ======================== > I want to know why?and if I put the hdf data under the F:\anzhuang\FWTools > 2.2.8\bin, I can get the correct result...... > > _______________________________________________ > gdal-dev mailing list > gdal-dev@lists.osgeo.org > http://lists.osgeo.org/mailman/listinfo/gdal-dev > Regards, -- Chaitanya kumar CH. _______________________________________________ gdal-dev mailing list gdal-dev@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/gdal-dev
