load reverse

[sravan megan]

Hi All,

   I am new to GCC. I was working in an Embedded processor with
GCC-4.6.4 version.

   I need to add load/store reverse instructions to the MD file.

   My instructions will look as below:

   LWX Rd,Ra,Rb

    operation: Addr := Ra + Rb
                    Rd := *Addr    (loading data with the opposite endianness)

      SWX Rd,Ra,Rb

     operation: Addr := Ra + Rb
                    *Addr := Rd    (storing data with the opposite endianness)



    To add the above instructions in to md file I tried below pattern in md file

     (define_insn "movsi_rev"
  [(set (match_operand:SI 0 "nonimmediate_operand" "=d,m")
        (bswap: SI (match_operand:SI 1 "move_src_operand"         "m,d")))]
  ""
  "@
   lwx\t%0,%1,%0
   swx\t%0,%1,%0"
  [(set_attr "type"     "load,store")
  (set_attr "mode"      "SI")
  (set_attr "length"    "4,4")])


   I wrote a small testcase which is generating swx instruction but
the operands are more due to which it is failing in assembler phase

ex:
int store_rev(int *n)
{
  return ((((*n) & 0xff000000) >> 24)
            | (((*n) & 0x00ff0000) >>  8)
            | (((*n) & 0x0000ff00) <<  8)
            | (((*n) & 0x000000ff) << 24));

}

for the above store_rev function I need to generate only single swx instruction.
I was successful in generating the swx instruction but instead of 3
registers compiler is generating one extra operand "0"  swx r0,r2,0,r0

   ex: instead of swx r0,r2,r0 it is generating swx r0,r2,0,r0

can anyone please help me in removing the extra operand in the above
instruction.

Thanks,
Sravan