Hi!
On 2026-05-01T11:50:11+0200, Stefan Schulze Frielinghaus
<[email protected]> wrote:
> I'm in the middle of preparing a patch in order to remove -m31 support
> for s390. After the removal, there is only 64-bit support left which
> renders multilib obsolete on s390 ... or doesn't it? In the past 32-bit
> libraries were installed under /usr/lib and 64-bit libraries under
> /usr/lib64 which I would like to keep.
Not sure if the following helps you figure out how to configure, but just
in case: a standard x86_64-pc-linux-gnu build (on Debian/Ubuntu;
multiarch), puts (default) '-m64' libraries into 'lib64/', and '-m32'
ones into 'lib32/', and 'lib/' only contains "GCC internals". If I build
that with '--disable-multilib' (which should -- conceptually --
correspond to your new scenario?), I still get 'lib64/' for the (default)
'-m64' libraries (and no 'lib32/' anymore), and the 'include's also still
work.
Grüße
Thomas
> Naively removing
> MULTILIB_{OPTIONS,DIRNAMES,OSDIRNAMES} from Makefile
> config/s390/t-linux64 and the define MULTILIB_DEFAULTS results in
> choosing the wrong library dir `lib` instead of `lib64`. For example,
> on Fedora we would run into:
>
> /devel/gcc-test/build/./gcc/xgcc -B/devel/gcc-test/build/./gcc/
> -B/devel/gcc-test/dst/s390x-ibm-linux-gnu/bin/
> -B/devel/gcc-test/dst/s390x-ibm-linux-gnu/lib/ -isystem
> /devel/gcc-test/dst/s390x-ibm-linux-gnu/include -isystem
> /devel/gcc-test/dst/s390x-ibm-linux-gnu/sys-include -O2 -g -O2 -DIN_GCC
> -W -Wall -Wno-error=narrowing -Wwrite-strings -Wcast-qual -Wstrict-prototypes
> -Wmissing-prototypes -Wold-style-definition -isystem ./include -fPIC
> -mlong-double-128 -g -DIN_LIBGCC2 -fbuilding-libgcc -fno-stack-protector
> -shared -nodefaultlibs -Wl,--soname=libgcc_s.so.1
> -Wl,--version-script=libgcc.map -o ./libgcc_s.so.1.tmp -g -O2 -B./
> _muldi3_s.o _negdi2_s.o _lshrdi3_s.o _ashldi3_s.o _ashrdi3_s.o _cmpdi2_s.o
> _ucmpdi2_s.o _clear_cache_s.o _trampoline_s.o __main_s.o _absvsi2_s.o
> _absvdi2_s.o _addvsi3_s.o _addvdi3_s.o _subvsi3_s.o _subvdi3_s.o _mulvsi3_s.o
> _mulvdi3_s.o _negvsi2_s.o _negvdi2_s.o _ctors_s.o _ffssi2_s.o _ffsdi2_s.o
> _clz_s.o _clzsi2_s.o _clzdi2_s.o _ctzsi2_s.o _ctzdi2_s.o _popcount_tab_s.o
> _popcountsi2_s.o _popcountdi2_s.o _paritysi2_s.o _paritydi2_s.o _powisf2_s.o
> _powidf2_s.o _powixf2_s.o _powitf2_s.o _mulhc3_s.o _mulsc3_s.o _muldc3_s.o
> _mulxc3_s.o _multc3_s.o _divhc3_s.o _divsc3_s.o _divdc3_s.o _divxc3_s.o
> _divtc3_s.o _bswapsi2_s.o _bswapdi2_s.o _clrsbsi2_s.o _clrsbdi2_s.o
> _mulbitint3_s.o _fixunssfsi_s.o _fixunsdfsi_s.o _fixunsxfsi_s.o _fixsfdi_s.o
> _fixdfdi_s.o _fixxfdi_s.o _fixtfdi_s.o _fixunssfdi_s.o _fixunsdfdi_s.o
> _fixunsxfdi_s.o _fixunstfdi_s.o _floatdisf_s.o _floatdidf_s.o _floatdixf_s.o
> _floatditf_s.o _floatundisf_s.o _floatundidf_s.o _floatundixf_s.o
> _floatunditf_s.o _divdi3_s.o _moddi3_s.o _divmoddi4_s.o _udivdi3_s.o
> _umoddi3_s.o _udivmoddi4_s.o _udiv_w_sdiv_s.o _divmodbitint4_s.o
> _dpd_hf_to_sd_s.o _dpd_hf_to_dd_s.o _dpd_hf_to_td_s.o _dpd_sd_to_hf_s.o
> _dpd_dd_to_hf_s.o _dpd_td_to_hf_s.o sfp-exceptions_s.o extendhfsf2_s.o
> extendhfdf2_s.o extendhftf2_s.o truncsfhf2_s.o truncdfhf2_s.o trunctfhf2_s.o
> fixhfti_s.o fixunshfti_s.o floattihf_s.o floatuntihf_s.o floatbitinthf_s.o
> fixtfbitint_s.o floatbitinttf_s.o fixsfbitint_s.o floatbitintsf_s.o
> fixdfbitint_s.o floatbitintdf_s.o enable-execute-stack_s.o hardcfr_s.o
> strub_s.o unwind-dw2_s.o unwind-dw2-fde-dip_s.o unwind-sjlj_s.o unwind-c_s.o
> emutls_s.o libgcc.a -lc
> /usr/bin/ld: cannot find crti.o: No such file or directory
>
> Option -v gives a clue why this is failing:
>
> LIBRARY_PATH=/devel/gcc-test/build/./gcc/:./:/lib/:/usr/lib/
>
> The library path can be fixed via
>
> MULTIARCH_DIRNAME = ../lib64$(call if_multiarch,:s390x-linux-gnu)
>
> where we then have
>
> LIBRARY_PATH=/devel/gcc-test/build/./gcc/:./:/lib/../lib64/:/lib/:/usr/lib/../lib64/:/usr/lib/
>
> However, this works on Fedora but fails on Debian/Ubuntu with another
> error:
>
> make[2]: Entering directory '/devel/gcc-test/build/s390x-ibm-linux-gnu/libgcc'
> # If this is the top-level multilib, build all the other
> # multilibs.
> /devel/gcc-test/build/./gcc/xgcc -B/devel/gcc-test/build/./gcc/
> -B/devel/gcc-test/dst/s390x-ibm-linux-gnu/bin/
> -B/devel/gcc-test/dst/s390x-ibm-linux-gnu/lib/ -isystem
> /devel/gcc-test/dst/s390x-ibm-linux-gnu/include -isystem
> /devel/gcc-test/dst/s390x-ibm-linux-gnu/sys-include -g -O2 -O2 -g -O2
> -DIN_GCC -W -Wall -Wno-error=narrowing -Wwrite-strings -Wcast-qual
> -Wstrict-prototypes -Wmissing-prototypes -Wold-style-definition -isystem
> ./include -fPIC -mlong-double-128 -g -DIN_LIBGCC2 -fbuilding-libgcc
> -fno-stack-protector -fPIC -mlong-double-128 -I. -I. -I../.././gcc
> -I/devel/gcc-test/src/libgcc -I/devel/gcc-test/src/libgcc/.
> -I/devel/gcc-test/src/libgcc/../gcc -I/devel/gcc-test/src/libgcc/../include
> -DHAVE_CC_TLS -o _muldi3.o -MT _muldi3.o -MD -MP -MF _muldi3.dep -DL_muldi3
> -c /devel/gcc-test/src/libgcc/libgcc2.c -fvisibility=hidden -DHIDE_EXPORTS
> In file included from /devel/gcc-test/src/libgcc/../gcc/tsystem.h:95,
> from /devel/gcc-test/src/libgcc/libgcc2.c:27:
> /usr/include/stdio.h:28:10: fatal error: bits/libc-header-start.h: No such
> file or directory
> 28 | #include <bits/libc-header-start.h>
> | ^~~~~~~~~~~~~~~~~~~~~~~~~~
> compilation terminated.
>
> Option -v shows:
>
> #include <...> search starts here:
> .
> ../.././gcc
> /devel/gcc-test/src/libgcc
> /devel/gcc-test/src/libgcc/../gcc
> /devel/gcc-test/src/libgcc/../include
> /devel/gcc-test/build/./gcc/include
> /devel/gcc-test/build/./gcc/include-fixed
> /usr/local/include
> /usr/include
> End of search list.
>
> However, on Debian/Ubuntu we have a multiarch directory structure
>
> $ ls /usr/include/bits
> ls: cannot access '/usr/include/bits': No such file or directory
> $ ls /usr/include/s390x-linux-gnu/bits/libc-header-start.h
> /usr/include/s390x-linux-gnu/bits/libc-header-start.h
>
> The only configuration which works so far on Fedora/Debian/Ubuntu is to
> still enable multilib support via
>
> config/s390/t-linux64:
> MULTILIB_OPTIONS = m64
> MULTILIB_DIRNAMES = 64
> MULTILIB_OSDIRNAMES = ../lib64$(call if_multiarch,:s390x-linux-gnu)
>
> config/s390/linux.h:
> #define MULTILIB_DEFAULTS { "m64" }
>
> However, having a multilib setup for a single option seems overly
> complicated and slightly off to me. Though, some comments seem to
> indicate that for some setups this maybe required. Since I'm not
> familiar with multilib/multiarch setups I might have missed something
> and welcome any suggestions. If everything fails, I will keep the
> single multilib setup since this is basically the configuration which
> works up to date.
>
> Cheers,
> Stefan
