The changes were done automatically using 'doxygen -u' to rebase the
config on Doxygen 1.17.0, which added a number of new config options and
removed HTML_TIMESTAMP and LATEX_TIMESTAMP.
libstdc++-v3/ChangeLog:
* doc/doxygen/user.cfg.in: Update Doxygen config.
---
I meant to send this as the first patch in the series, but got my
git-send-email arguments wrong and the series started from the patch
*after* this one.
The following comment from [PATCH 1/10] was meant to refer to this
patch:
Tested x86_64-linux, with Doxygen 1.13.2 and 1.17.0 (from git)
With 1.13.2 some of the new config settings cause warnings because
they're not recognized:
warning: ignoring unsupported tag 'MARKDOWN_STRICT' at line 371, file
/home/jwakely/src/gcc/build/x86_64-pc-linux-gnu/libstdc++-v3/doc/doxygen/html.cfg
warning: ignoring unsupported tag 'GENERATE_REQUIREMENTS' at line 796, file
/home/jwakely/src/gcc/build/x86_64-pc-linux-gnu/libstdc++-v3/doc/doxygen/html.cfg
warning: ignoring unsupported tag 'REQ_TRACEABILITY_INFO' at line 810, file
/home/jwakely/src/gcc/build/x86_64-pc-linux-gnu/libstdc++-v3/doc/doxygen/html.cfg
warning: ignoring unsupported tag 'PAGE_OUTLINE_PANEL' at line 2091, file
/home/jwakely/src/gcc/build/x86_64-pc-linux-gnu/libstdc++-v3/doc/doxygen/html.cfg
warning: ignoring unsupported tag 'UML_MAX_EDGE_LABELS' at line 3116, file
/home/jwakely/src/gcc/build/x86_64-pc-linux-gnu/libstdc++-v3/doc/doxygen/html.cfg
warning: ignoring unsupported tag 'MERMAID_PATH' at line 3311, file
/home/jwakely/src/gcc/build/x86_64-pc-linux-gnu/libstdc++-v3/doc/doxygen/html.cfg
warning: ignoring unsupported tag 'MERMAID_CONFIG_FILE' at line 3317, file
/home/jwakely/src/gcc/build/x86_64-pc-linux-gnu/libstdc++-v3/doc/doxygen/html.cfg
warning: ignoring unsupported tag 'MERMAID_RENDER_MODE' at line 3328, file
/home/jwakely/src/gcc/build/x86_64-pc-linux-gnu/libstdc++-v3/doc/doxygen/html.cfg
warning: ignoring unsupported tag 'MERMAID_JS_URL' at line 3346, file
/home/jwakely/src/gcc/build/x86_64-pc-linux-gnu/libstdc++-v3/doc/doxygen/html.cfg
warning: ignoring unsupported tag 'MERMAIDFILE_DIRS' at line 3352, file
/home/jwakely/src/gcc/build/x86_64-pc-linux-gnu/libstdc++-v3/doc/doxygen/html.cfg
We could just leave those new ones out of the file for now, so people
can use older versions. We don't care about any of those except maybe
MARKDOWN_STRICT.
libstdc++-v3/doc/doxygen/user.cfg.in | 1252 +++++++++++++++++++-------
1 file changed, 907 insertions(+), 345 deletions(-)
diff --git a/libstdc++-v3/doc/doxygen/user.cfg.in
b/libstdc++-v3/doc/doxygen/user.cfg.in
index 8969bb8b9489..bdcb19c56faa 100644
--- a/libstdc++-v3/doc/doxygen/user.cfg.in
+++ b/libstdc++-v3/doc/doxygen/user.cfg.in
@@ -1,7 +1,7 @@
-# Doxyfile 1.8.20
+# Doxyfile 1.17.0
# This file describes the settings to be used by the documentation system
-# doxygen (www.doxygen.org) for a project.
+# Doxygen (www.doxygen.org) for a project.
#
# All text after a double hash (##) is considered a comment and is placed in
# front of the TAG it is preceding.
@@ -12,6 +12,16 @@
# For lists, items can also be appended using:
# TAG += value [value, ...]
# Values that contain spaces should be placed between quotes (\" \").
+#
+# Note:
+#
+# Use Doxygen to compare the used configuration file with the template
+# configuration file:
+# doxygen -x [configFile]
+# Use Doxygen to compare the used configuration file with the template
+# configuration file without replacing the environment variables or CMake type
+# replacement variables:
+# doxygen -x_noenv [configFile]
#---------------------------------------------------------------------------
# Project related configuration options
@@ -41,7 +51,7 @@ PROJECT_NAME = libstdc++
PROJECT_NUMBER =
# Using the PROJECT_BRIEF tag one can provide an optional one line description
-# for a project that appears at the top of each page and should give viewer a
+# for a project that appears at the top of each page and should give viewers a
# quick idea about the purpose of the project. Keep the description short.
PROJECT_BRIEF =
@@ -53,24 +63,42 @@ PROJECT_BRIEF =
PROJECT_LOGO =
+# With the PROJECT_ICON tag one can specify an icon that is included in the
tabs
+# when the HTML document is shown. Doxygen will copy the logo to the output
+# directory.
+
+PROJECT_ICON =
+
# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
# into which the generated documentation will be written. If a relative path is
-# entered, it will be relative to the location where doxygen was started. If
+# entered, it will be relative to the location where Doxygen was started. If
# left blank the current directory will be used.
OUTPUT_DIRECTORY = @outdir@
-# If the CREATE_SUBDIRS tag is set to YES then doxygen will create 4096 sub-
-# directories (in 2 levels) under the output directory of each output format
and
-# will distribute the generated files over these directories. Enabling this
-# option can be useful when feeding doxygen a huge amount of source files,
where
-# putting all generated files in the same directory would otherwise causes
-# performance problems for the file system.
+# If the CREATE_SUBDIRS tag is set to YES then Doxygen will create up to 4096
+# sub-directories (in 2 levels) under the output directory of each output
format
+# and will distribute the generated files over these directories. Enabling this
+# option can be useful when feeding Doxygen a huge amount of source files,
where
+# putting all generated files in the same directory would otherwise cause
+# performance problems for the file system. Adapt CREATE_SUBDIRS_LEVEL to
+# control the number of sub-directories.
# The default value is: NO.
CREATE_SUBDIRS = NO
-# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII
+# Controls the number of sub-directories that will be created when
+# CREATE_SUBDIRS tag is set to YES. Level 0 represents 16 directories, and
every
+# level increment doubles the number of directories, resulting in 4096
+# directories at level 8 which is the default and also the maximum value. The
+# sub-directories are organized in 2 levels, the first level always has a fixed
+# number of 16 directories.
+# Minimum value: 0, maximum value: 8, default value: 8.
+# This tag requires that the tag CREATE_SUBDIRS is set to YES.
+
+CREATE_SUBDIRS_LEVEL = 8
+
+# If the ALLOW_UNICODE_NAMES tag is set to YES, Doxygen will allow non-ASCII
# characters to appear in the names of generated files. If set to NO, non-ASCII
# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode
# U+3044.
@@ -79,28 +107,28 @@ CREATE_SUBDIRS = NO
ALLOW_UNICODE_NAMES = NO
# The OUTPUT_LANGUAGE tag is used to specify the language in which all
-# documentation generated by doxygen is written. Doxygen will use this
+# documentation generated by Doxygen is written. Doxygen will use this
# information to generate all constant output in the proper language.
-# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan,
Chinese,
-# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),
-# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,
-# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),
-# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,
-# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian,
Russian,
-# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,
-# Ukrainian and Vietnamese.
+# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Bulgarian,
+# Catalan, Chinese, Chinese-Traditional, Croatian, Czech, Danish, Dutch,
English
+# (United States), Esperanto, Farsi (Persian), Finnish, French, German, Greek,
+# Hindi, Hungarian, Indonesian, Italian, Japanese, Japanese-en (Japanese with
+# English messages), Korean, Korean-en (Korean with English messages), Latvian,
+# Lithuanian, Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese,
+# Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish,
+# Swedish, Turkish, Ukrainian and Vietnamese.
# The default value is: English.
OUTPUT_LANGUAGE = English
-# If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member
+# If the BRIEF_MEMBER_DESC tag is set to YES, Doxygen will include brief member
# descriptions after the members that are listed in the file and class
# documentation (similar to Javadoc). Set to NO to disable this.
# The default value is: YES.
BRIEF_MEMBER_DESC = @do_man@
-# If the REPEAT_BRIEF tag is set to YES, doxygen will prepend the brief
+# If the REPEAT_BRIEF tag is set to YES, Doxygen will prepend the brief
# description of a member or function before the detailed description
#
# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
@@ -121,13 +149,13 @@ REPEAT_BRIEF = YES
ABBREVIATE_BRIEF =
# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
-# doxygen will generate a detailed section even if there is only a brief
+# Doxygen will generate a detailed section even if there is only a brief
# description.
# The default value is: NO.
ALWAYS_DETAILED_SEC = YES
-# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
+# If the INLINE_INHERITED_MEMB tag is set to YES, Doxygen will show all
# inherited members of a class in the documentation of that class as if those
# members were ordinary class members. Constructors, destructors and assignment
# operators of the base classes will not be shown.
@@ -135,7 +163,7 @@ ALWAYS_DETAILED_SEC = YES
INLINE_INHERITED_MEMB = YES
-# If the FULL_PATH_NAMES tag is set to YES, doxygen will prepend the full path
+# If the FULL_PATH_NAMES tag is set to YES, Doxygen will prepend the full path
# before files name in the file list and in the header files. If set to NO the
# shortest path that makes the file name unique will be used
# The default value is: YES.
@@ -145,11 +173,11 @@ FULL_PATH_NAMES = NO
# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
# Stripping is only done if one of the specified strings matches the left-hand
# part of the path. The tag can be used to show relative paths in the file
list.
-# If left blank the directory from which doxygen is run is used as the path to
+# If left blank the directory from which Doxygen is run is used as the path to
# strip.
#
# Note that you can specify absolute paths here, but also relative paths, which
-# will be relative from the directory where doxygen is started.
+# will be relative from the directory where Doxygen is started.
# This tag requires that the tag FULL_PATH_NAMES is set to YES.
STRIP_FROM_PATH = @srcdir@/doc/ @srcdir@/libsupc++/ include/
@@ -163,41 +191,42 @@ STRIP_FROM_PATH = @srcdir@/doc/
@srcdir@/libsupc++/ include/
STRIP_FROM_INC_PATH =
-# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
-# less readable) file names. This can be useful is your file systems doesn't
+# If the SHORT_NAMES tag is set to YES, Doxygen will generate much shorter (but
+# less readable) file names. This can be useful if your file system doesn't
# support long names like on DOS, Mac, or CD-ROM.
# The default value is: NO.
SHORT_NAMES = @shortname@
-# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
-# first line (until the first dot) of a Javadoc-style comment as the brief
-# description. If set to NO, the Javadoc-style will behave just like regular
Qt-
-# style comments (thus requiring an explicit @brief command for a brief
-# description.)
+# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen will interpret the
+# first line (until the first dot, question mark or exclamation mark) of a
+# Javadoc-style comment as the brief description. If set to NO, the Javadoc-
+# style will behave just like regular Qt-style comments (thus requiring an
+# explicit @brief command for a brief description.)
# The default value is: NO.
JAVADOC_AUTOBRIEF = NO
-# If the JAVADOC_BANNER tag is set to YES then doxygen will interpret a line
+# If the JAVADOC_BANNER tag is set to YES then Doxygen will interpret a line
# such as
# /***************
# as being the beginning of a Javadoc-style comment "banner". If set to NO, the
# Javadoc-style will behave just like regular comments and it will not be
-# interpreted by doxygen.
+# interpreted by Doxygen.
# The default value is: NO.
JAVADOC_BANNER = NO
-# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
-# line (until the first dot) of a Qt-style comment as the brief description. If
-# set to NO, the Qt-style will behave just like regular Qt-style comments (thus
-# requiring an explicit \brief command for a brief description.)
+# If the QT_AUTOBRIEF tag is set to YES then Doxygen will interpret the first
+# line (until the first dot, question mark or exclamation mark) of a Qt-style
+# comment as the brief description. If set to NO, the Qt-style will behave just
+# like regular Qt-style comments (thus requiring an explicit \brief command for
+# a brief description.)
# The default value is: NO.
QT_AUTOBRIEF = NO
-# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen treat a
# multi-line C++ special comment block (i.e. a block of //! or /// comments) as
# a brief description. This used to be the default behavior. The new default is
# to treat a multi-line C++ comment block as a detailed description. Set this
@@ -209,10 +238,10 @@ QT_AUTOBRIEF = NO
MULTILINE_CPP_IS_BRIEF = YES
-# By default Python docstrings are displayed as preformatted text and doxygen's
+# By default Python docstrings are displayed as preformatted text and Doxygen's
# special commands cannot be used. By setting PYTHON_DOCSTRING to NO the
-# doxygen's special commands can be used and the contents of the docstring
-# documentation blocks is shown as doxygen documentation.
+# Doxygen's special commands can be used and the contents of the docstring
+# documentation blocks is shown as Doxygen documentation.
# The default value is: YES.
PYTHON_DOCSTRING = YES
@@ -223,7 +252,7 @@ PYTHON_DOCSTRING = YES
INHERIT_DOCS = YES
-# If the SEPARATE_MEMBER_PAGES tag is set to YES then doxygen will produce a
new
+# If the SEPARATE_MEMBER_PAGES tag is set to YES then Doxygen will produce a
new
# page for each member. If set to NO, the documentation of a member will be
part
# of the file/class/namespace that contains it.
# The default value is: NO.
@@ -240,16 +269,16 @@ TAB_SIZE = 8
# the documentation. An alias has the form:
# name=value
# For example adding
-# "sideeffect=@par Side Effects:\n"
+# "sideeffect=@par Side Effects:^^"
# will allow you to put the command \sideeffect (or @sideeffect) in the
# documentation, which will result in a user-defined paragraph with heading
-# "Side Effects:". You can put \n's in the value part of an alias to insert
-# newlines (in the resulting output). You can put ^^ in the value part of an
-# alias to insert a newline as if a physical newline was in the original file.
-# When you need a literal { or } or , in the value part of an alias you have to
-# escape them by means of a backslash (\), this can lead to conflicts with the
-# commands \{ and \} for these it is advised to use the version @{ and @} or
use
-# a double escape (\\{ and \\})
+# "Side Effects:". Note that you cannot put \n's in the value part of an alias
+# to insert newlines (in the resulting output). You can put ^^ in the value
part
+# of an alias to insert a newline as if a physical newline was in the original
+# file. When you need a literal { or } or , in the value part of an alias you
+# have to escape them by means of a backslash (\), this can lead to conflicts
+# with the commands \{ and \} for these it is advised to use the version @{ and
+# @} or use a double escape (\\{ and \\})
ALIASES = "doctodo=@todo Needs documentation! See
http://gcc.gnu.org/onlinedocs/libstdc++/manual/documentation_style.html"; \
"headername{1}=Instead, include \<\1\>." \
@@ -295,58 +324,95 @@ OPTIMIZE_OUTPUT_SLICE = NO
# parses. With this tag you can assign which parser to use for a given
# extension. Doxygen has a built-in mapping, but you can override or extend it
# using this tag. The format is ext=language, where ext is a file extension,
and
-# language is one of the parsers supported by doxygen: IDL, Java, JavaScript,
-# Csharp (C#), C, C++, D, PHP, md (Markdown), Objective-C, Python, Slice, VHDL,
-# Fortran (fixed format Fortran: FortranFixed, free formatted Fortran:
+# language is one of the parsers supported by Doxygen: IDL, Java, JavaScript,
+# Csharp (C#), C, C++, Lex, D, PHP, md (Markdown), Objective-C, Python, Slice,
+# VHDL, Fortran (fixed format Fortran: FortranFixed, free formatted Fortran:
# FortranFree, unknown formatted Fortran: Fortran. In the later case the parser
# tries to guess whether the code is fixed or free formatted code, this is the
-# default for Fortran type files). For instance to make doxygen treat .inc
files
+# default for Fortran type files). For instance to make Doxygen treat .inc
files
# as Fortran files (default is PHP), and .f files as C (default is Fortran),
# use: inc=Fortran f=C.
#
# Note: For files without extension you can use no_extension as a placeholder.
#
# Note that for custom extensions you also need to set FILE_PATTERNS otherwise
-# the files are not read by doxygen.
+# the files are not read by Doxygen. When specifying no_extension you should
add
+# * to the FILE_PATTERNS.
+#
+# Note see also the list of default file extension mappings.
EXTENSION_MAPPING = no_extension=C++ \
.h=C++ \
.tcc=C++ \
.hpp=C++
-# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all
comments
+# If the MARKDOWN_SUPPORT tag is enabled then Doxygen pre-processes all
comments
# according to the Markdown format, which allows for more readable
# documentation. See https://daringfireball.net/projects/markdown/ for details.
-# The output of markdown processing is further processed by doxygen, so you can
-# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
+# The output of markdown processing is further processed by Doxygen, so you can
+# mix Doxygen, HTML, and XML commands with Markdown formatting. Disable only in
# case of backward compatibilities issues.
# The default value is: YES.
MARKDOWN_SUPPORT = YES
+# If the MARKDOWN_STRICT tag is enabled then Doxygen treats text in comments as
+# Markdown formatted also in cases where Doxygen's native markup format
+# conflicts with that of Markdown. This is only relevant in cases where
+# backticks are used. Doxygen's native markup style allows a single quote to
end
+# a text fragment started with a backtick and then treat it as a piece of
quoted
+# text, whereas in Markdown such text fragment is treated as verbatim and only
+# ends when a second matching backtick is found. Also, Doxygen's native markup
+# format requires double quotes to be escaped when they appear in a backtick
+# section, whereas this is not needed for Markdown.
+# The default value is: YES.
+# This tag requires that the tag MARKDOWN_SUPPORT is set to YES.
+
+MARKDOWN_STRICT = YES
+
# When the TOC_INCLUDE_HEADINGS tag is set to a non-zero value, all headings up
# to that level are automatically included in the table of contents, even if
# they do not have an id attribute.
# Note: This feature currently applies only to Markdown headings.
-# Minimum value: 0, maximum value: 99, default value: 5.
+# Minimum value: 0, maximum value: 99, default value: 6.
# This tag requires that the tag MARKDOWN_SUPPORT is set to YES.
TOC_INCLUDE_HEADINGS = 0
-# When enabled doxygen tries to link words that correspond to documented
+# The MARKDOWN_ID_STYLE tag can be used to specify the algorithm used to
+# generate identifiers for the Markdown headings. Note: Every identifier is
+# unique.
+# Possible values are: DOXYGEN use a fixed 'autotoc_md' string followed by a
+# sequence number starting at 0 and GITHUB use the lower case version of title
+# with any whitespace replaced by '-' and punctuation characters removed.
+# The default value is: DOXYGEN.
+# This tag requires that the tag MARKDOWN_SUPPORT is set to YES.
+
+MARKDOWN_ID_STYLE = DOXYGEN
+
+# When enabled Doxygen tries to link words that correspond to documented
# classes, or namespaces to their corresponding documentation. Such a link can
# be prevented in individual cases by putting a % sign in front of the word or
-# globally by setting AUTOLINK_SUPPORT to NO.
+# globally by setting AUTOLINK_SUPPORT to NO. Words listed in the
+# AUTOLINK_IGNORE_WORDS tag are excluded from automatic linking.
# The default value is: YES.
AUTOLINK_SUPPORT = NO
+# This tag specifies a list of words that, when matching the start of a word in
+# the documentation, will suppress auto links generation, if it is enabled via
+# AUTOLINK_SUPPORT. This list does not affect links explicitly created using #
+# or the \link or \ref commands.
+# This tag requires that the tag AUTOLINK_SUPPORT is set to YES.
+
+AUTOLINK_IGNORE_WORDS =
+
# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
# to include (a tag file for) the STL sources as input, then you should set
this
-# tag to YES in order to let doxygen match functions declarations and
+# tag to YES in order to let Doxygen match functions declarations and
# definitions whose arguments contain STL classes (e.g. func(std::string);
-# versus func(std::string) {}). This also make the inheritance and
collaboration
-# diagrams that involve STL classes more complete and accurate.
+# versus func(std::string) {}). This also makes the inheritance and
+# collaboration diagrams that involve STL classes more complete and accurate.
# The default value is: NO.
BUILTIN_STL_SUPPORT = NO
@@ -358,16 +424,16 @@ BUILTIN_STL_SUPPORT = NO
CPP_CLI_SUPPORT = NO
# Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
-# https://www.riverbankcomputing.com/software/sip/intro) sources only. Doxygen
-# will parse them like normal C++ but will assume all classes use public
instead
-# of private inheritance when no explicit protection keyword is present.
+# https://www.riverbankcomputing.com/software) sources only. Doxygen will parse
+# them like normal C++ but will assume all classes use public instead of
private
+# inheritance when no explicit protection keyword is present.
# The default value is: NO.
SIP_SUPPORT = NO
# For Microsoft's IDL there are propget and propput attributes to indicate
# getter and setter methods for a property. Setting this option to YES will
make
-# doxygen to replace the get and set methods by a property in the
documentation.
+# Doxygen to replace the get and set methods by a property in the
documentation.
# This will only work if the methods are indeed getting or setting a simple
# type. If this is not the case, or you want to show the methods anyway, you
# should set this option to NO.
@@ -376,7 +442,7 @@ SIP_SUPPORT = NO
IDL_PROPERTY_SUPPORT = NO
# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
-# tag is set to YES then doxygen will reuse the documentation of the first
+# tag is set to YES then Doxygen will reuse the documentation of the first
# member in the group (if any) for the other members of the group. By default
# all members of a group must be documented explicitly.
# The default value is: NO.
@@ -434,34 +500,42 @@ TYPEDEF_HIDES_STRUCT = NO
# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
# cache is used to resolve symbols given their name and scope. Since this can
be
# an expensive process and often the same symbol appears multiple times in the
-# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too
small
-# doxygen will become slower. If the cache is too large, memory is wasted. The
+# code, Doxygen keeps a cache of pre-resolved symbols. If the cache is too
small
+# Doxygen will become slower. If the cache is too large, memory is wasted. The
# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid
range
# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536
-# symbols. At the end of a run doxygen will report the cache usage and suggest
+# symbols. At the end of a run Doxygen will report the cache usage and suggest
# the optimal cache size from a speed point of view.
# Minimum value: 0, maximum value: 9, default value: 0.
LOOKUP_CACHE_SIZE = 0
-# The NUM_PROC_THREADS specifies the number threads doxygen is allowed to use
-# during processing. When set to 0 doxygen will based this on the number of
+# The NUM_PROC_THREADS specifies the number of threads Doxygen is allowed to
use
+# during processing. When set to 0 Doxygen will based this on the number of
# cores available in the system. You can set it explicitly to a value larger
# than 0 to get more control over the balance between CPU load and processing
# speed. At this moment only the input processing can be done using multiple
# threads. Since this is still an experimental feature the default is set to 1,
-# which efficively disables parallel processing. Please report any issues you
+# which effectively disables parallel processing. Please report any issues you
# encounter. Generating dot graphs in parallel is controlled by the
# DOT_NUM_THREADS setting.
-# Minimum value: 0, maximum value: 32, default value: 1.
+# Minimum value: 0, maximum value: 512, default value: 1.
NUM_PROC_THREADS = 1
+# If the TIMESTAMP tag is set different from NO then each generated page will
+# contain the date or date and time when the page was generated. Setting this
to
+# NO can help when comparing the output of multiple runs.
+# Possible values are: YES, NO, DATETIME and DATE.
+# The default value is: NO.
+
+TIMESTAMP = NO
+
#---------------------------------------------------------------------------
# Build related configuration options
#---------------------------------------------------------------------------
-# If the EXTRACT_ALL tag is set to YES, doxygen will assume all entities in
+# If the EXTRACT_ALL tag is set to YES, Doxygen will assume all entities in
# documentation are documented, even if no documentation was available. Private
# class members and static file members will be hidden unless the
# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES.
@@ -520,7 +594,14 @@ EXTRACT_LOCAL_METHODS = YES
EXTRACT_ANON_NSPACES = NO
-# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
+# If this flag is set to YES, the name of an unnamed parameter in a declaration
+# will be determined by the corresponding definition. By default unnamed
+# parameters remain unnamed in the output.
+# The default value is: YES.
+
+RESOLVE_UNNAMED_PARAMS = YES
+
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
# undocumented members inside documented classes or files. If set to NO these
# members will be included in the various overviews, but no documentation
# section is generated. This option has no effect if EXTRACT_ALL is enabled.
@@ -528,22 +609,31 @@ EXTRACT_ANON_NSPACES = NO
HIDE_UNDOC_MEMBERS = NO
-# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
+# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
# undocumented classes that are normally visible in the class hierarchy. If set
# to NO, these classes will be included in the various overviews. This option
-# has no effect if EXTRACT_ALL is enabled.
+# will also hide undocumented C++ concepts if enabled. This option has no
effect
+# if EXTRACT_ALL is enabled.
# The default value is: NO.
HIDE_UNDOC_CLASSES = YES
-# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
+# If the HIDE_UNDOC_NAMESPACES tag is set to YES, Doxygen will hide all
+# undocumented namespaces that are normally visible in the namespace hierarchy.
+# If set to NO, these namespaces will be included in the various overviews.
This
+# option has no effect if EXTRACT_ALL is enabled.
+# The default value is: YES.
+
+HIDE_UNDOC_NAMESPACES = YES
+
+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all friend
# declarations. If set to NO, these declarations will be included in the
# documentation.
# The default value is: NO.
HIDE_FRIEND_COMPOUNDS = NO
-# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any
+# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
# documentation blocks found inside the body of a function. If set to NO, these
# blocks will be appended to the function's detailed documentation block.
# The default value is: NO.
@@ -557,23 +647,31 @@ HIDE_IN_BODY_DOCS = NO
INTERNAL_DOCS = NO
-# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
-# names in lower-case letters. If set to YES, upper-case letters are also
-# allowed. This is useful if you have classes or files whose names only differ
-# in case and if your file system supports case sensitive file names. Windows
-# (including Cygwin) and Mac users are advised to set this option to NO.
-# The default value is: system dependent.
+# With the correct setting of option CASE_SENSE_NAMES Doxygen will better be
+# able to match the capabilities of the underlying filesystem. In case the
+# filesystem is case sensitive (i.e. it supports files in the same directory
+# whose names only differ in casing), the option must be set to YES to properly
+# deal with such files in case they appear in the input. For filesystems that
+# are not case sensitive the option should be set to NO to properly deal with
+# output files written for symbols that only differ in casing, such as for two
+# classes, one named CLASS and the other named Class, and to also support
+# references to files without having to specify the exact matching casing. On
+# Windows (including Cygwin) and macOS, users should typically set this option
+# to NO, whereas on Linux or other Unix flavors it should typically be set to
+# YES.
+# Possible values are: SYSTEM, NO and YES.
+# The default value is: SYSTEM.
CASE_SENSE_NAMES = NO
-# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
+# If the HIDE_SCOPE_NAMES tag is set to NO then Doxygen will show members with
# their full class and namespace scopes in the documentation. If set to YES,
the
# scope will be hidden.
# The default value is: NO.
HIDE_SCOPE_NAMES = NO
-# If the HIDE_COMPOUND_REFERENCE tag is set to NO (default) then doxygen will
+# If the HIDE_COMPOUND_REFERENCE tag is set to NO (default) then Doxygen will
# append additional text to a page's title, such as Class Reference. If set to
# YES the compound reference will be hidden.
# The default value is: NO.
@@ -586,7 +684,7 @@ HIDE_COMPOUND_REFERENCE= NO
SHOW_HEADERFILE = YES
-# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
+# If the SHOW_INCLUDE_FILES tag is set to YES then Doxygen will put a list of
# the files that are included by a file in the documentation of that file.
# The default value is: YES.
@@ -599,7 +697,7 @@ SHOW_INCLUDE_FILES = NO
SHOW_GROUPED_MEMB_INC = NO
-# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
+# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen will list include
# files with double quotes in the documentation rather than with sharp
brackets.
# The default value is: NO.
@@ -611,14 +709,14 @@ FORCE_LOCAL_INCLUDES = NO
INLINE_INFO = YES
-# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the
+# If the SORT_MEMBER_DOCS tag is set to YES then Doxygen will sort the
# (detailed) documentation of file and class members alphabetically by member
# name. If set to NO, the members will appear in declaration order.
# The default value is: YES.
SORT_MEMBER_DOCS = YES
-# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief
+# If the SORT_BRIEF_DOCS tag is set to YES then Doxygen will sort the brief
# descriptions of file, namespace and class members alphabetically by member
# name. If set to NO, the members will appear in declaration order. Note that
# this will also influence the order of the classes in the class list.
@@ -626,7 +724,7 @@ SORT_MEMBER_DOCS = YES
SORT_BRIEF_DOCS = YES
-# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
+# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then Doxygen will sort the
# (brief and detailed) documentation of class members so that constructors and
# destructors are listed first. If set to NO the constructors will appear in
the
# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS.
@@ -638,7 +736,7 @@ SORT_BRIEF_DOCS = YES
SORT_MEMBERS_CTORS_1ST = YES
-# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the
hierarchy
+# If the SORT_GROUP_NAMES tag is set to YES then Doxygen will sort the
hierarchy
# of group names into alphabetical order. If set to NO the group names will
# appear in their defined order.
# The default value is: NO.
@@ -655,11 +753,11 @@ SORT_GROUP_NAMES = YES
SORT_BY_SCOPE_NAME = NO
-# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper
+# If the STRICT_PROTO_MATCHING option is enabled and Doxygen fails to do proper
# type resolution of all parameters of a function it will reject a match
between
# the prototype and the implementation of a member function even if there is
# only one candidate or it is obvious which candidate to choose by doing a
-# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still
+# simple string match. By disabling STRICT_PROTO_MATCHING Doxygen will still
# accept a match between prototype and implementation in such cases.
# The default value is: NO.
@@ -690,6 +788,27 @@ GENERATE_BUGLIST = NO
GENERATE_DEPRECATEDLIST= YES
+# The GENERATE_REQUIREMENTS tag can be used to enable (YES) or disable (NO) the
+# requirements page. When enabled, this page is automatically created when at
+# least one comment block with a \requirement command appears in the input.
+# The default value is: YES.
+
+GENERATE_REQUIREMENTS = YES
+
+# The REQ_TRACEABILITY_INFO tag controls if traceability information is shown
on
+# the requirements page (only relevant when using \requirement comment blocks).
+# The setting NO will disable the traceability information altogether. The
+# setting UNSATISFIED_ONLY will show a list of requirements that are missing a
+# satisfies relation (through the command: \satisfies). Similarly the setting
+# UNVERIFIED_ONLY will show a list of requirements that are missing a verifies
+# relation (through the command: \verifies). Setting the tag to YES (the
+# default) will show both lists if applicable.
+# Possible values are: YES, NO, UNSATISFIED_ONLY and UNVERIFIED_ONLY.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_REQUIREMENTS is set to YES.
+
+REQ_TRACEABILITY_INFO = YES
+
# The ENABLED_SECTIONS tag can be used to enable conditional documentation
# sections, marked by \if <section_label> ... \endif and \cond <section_label>
# ... \endcond blocks.
@@ -729,24 +848,25 @@ SHOW_FILES = YES
SHOW_NAMESPACES = YES
# The FILE_VERSION_FILTER tag can be used to specify a program or script that
-# doxygen should invoke to get the current version for each file (typically
from
+# Doxygen should invoke to get the current version for each file (typically
from
# the version control system). Doxygen will invoke the program by executing
(via
# popen()) the command command input-file, where command is the value of the
# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided
-# by doxygen. Whatever the program writes to standard output is used as the
file
+# by Doxygen. Whatever the program writes to standard output is used as the
file
# version. For an example see the documentation.
FILE_VERSION_FILTER =
# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
-# by doxygen. The layout file controls the global structure of the generated
+# by Doxygen. The layout file controls the global structure of the generated
# output files in an output format independent way. To create the layout file
-# that represents doxygen's defaults, run doxygen with the -l option. You can
+# that represents Doxygen's defaults, run Doxygen with the -l option. You can
# optionally specify a file name after the option, if omitted DoxygenLayout.xml
-# will be used as the name of the layout file.
+# will be used as the name of the layout file. See also section "Changing the
+# layout of pages" for information.
#
-# Note that if you run doxygen from a directory containing a file called
-# DoxygenLayout.xml, doxygen will parse it automatically even if the
LAYOUT_FILE
+# Note that if you run Doxygen from a directory containing a file called
+# DoxygenLayout.xml, Doxygen will parse it automatically even if the
LAYOUT_FILE
# tag is left empty.
LAYOUT_FILE =
@@ -761,19 +881,35 @@ LAYOUT_FILE =
CITE_BIB_FILES =
+# The EXTERNAL_TOOL_PATH tag can be used to extend the search path (PATH
+# environment variable) so that external tools such as latex and gs can be
+# found.
+# Note: Directories specified with EXTERNAL_TOOL_PATH are added in front of the
+# path already specified by the PATH variable, and are added in the order
+# specified.
+# Note: This option is particularly useful for macOS version 14 (Sonoma) and
+# higher, when running Doxygen from Doxywizard, because in this case any user-
+# defined changes to the PATH are ignored. A typical example on macOS is to set
+# EXTERNAL_TOOL_PATH = /Library/TeX/texbin /usr/local/bin
+# together with the standard path, the full search path used by doxygen when
+# launching external tools will then become
+# PATH=/Library/TeX/texbin:/usr/local/bin:/usr/bin:/bin:/usr/sbin:/sbin
+
+EXTERNAL_TOOL_PATH =
+
#---------------------------------------------------------------------------
# Configuration options related to warning and progress messages
#---------------------------------------------------------------------------
# The QUIET tag can be used to turn on/off the messages that are generated to
-# standard output by doxygen. If QUIET is set to YES this implies that the
+# standard output by Doxygen. If QUIET is set to YES this implies that the
# messages are off.
# The default value is: NO.
QUIET = YES
# The WARNINGS tag can be used to turn on/off the warning messages that are
-# generated to standard error (stderr) by doxygen. If WARNINGS is set to YES
+# generated to standard error (stderr) by Doxygen. If WARNINGS is set to YES
# this implies that the warnings are on.
#
# Tip: Turn warnings on while writing the documentation.
@@ -781,49 +917,97 @@ QUIET = YES
WARNINGS = YES
-# If the WARN_IF_UNDOCUMENTED tag is set to YES then doxygen will generate
+# If the WARN_IF_UNDOCUMENTED tag is set to YES then Doxygen will generate
# warnings for undocumented members. If EXTRACT_ALL is set to YES then this
flag
# will automatically be disabled.
# The default value is: YES.
WARN_IF_UNDOCUMENTED = NO
-# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings
for
-# potential errors in the documentation, such as not documenting some
parameters
-# in a documented function, or documenting parameters that don't exist or using
-# markup commands wrongly.
+# If the WARN_IF_DOC_ERROR tag is set to YES, Doxygen will generate warnings
for
+# potential errors in the documentation, such as documenting some parameters in
+# a documented function twice, or documenting parameters that don't exist or
+# using markup commands wrongly.
# The default value is: YES.
WARN_IF_DOC_ERROR = YES
+# If WARN_IF_INCOMPLETE_DOC is set to YES, Doxygen will warn about incomplete
+# function parameter documentation. If set to NO, Doxygen will accept that some
+# parameters have no documentation without warning.
+# The default value is: YES.
+
+WARN_IF_INCOMPLETE_DOC = YES
+
# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions
that
# are documented, but have no documentation for their parameters or return
-# value. If set to NO, doxygen will only warn about wrong or incomplete
-# parameter documentation, but not about the absence of documentation. If
-# EXTRACT_ALL is set to YES then this flag will automatically be disabled.
+# value. If set to NO, Doxygen will only warn about wrong parameter
+# documentation, but not about the absence of documentation. If EXTRACT_ALL is
+# set to YES then this flag will automatically be disabled. See also
+# WARN_IF_INCOMPLETE_DOC
# The default value is: NO.
WARN_NO_PARAMDOC = NO
-# If the WARN_AS_ERROR tag is set to YES then doxygen will immediately stop
when
-# a warning is encountered.
+# If WARN_IF_UNDOC_ENUM_VAL option is set to YES, Doxygen will warn about
+# undocumented enumeration values. If set to NO, Doxygen will accept
+# undocumented enumeration values. If EXTRACT_ALL is set to YES then this flag
+# will automatically be disabled.
+# The default value is: NO.
+
+WARN_IF_UNDOC_ENUM_VAL = NO
+
+# If WARN_LAYOUT_FILE option is set to YES, Doxygen will warn about issues
found
+# while parsing the user defined layout file, such as missing or wrong
elements.
+# See also LAYOUT_FILE for details. If set to NO, problems with the layout file
+# will be suppressed.
+# The default value is: YES.
+
+WARN_LAYOUT_FILE = YES
+
+# If the WARN_AS_ERROR tag is set to YES then Doxygen will immediately stop
when
+# a warning is encountered. If the WARN_AS_ERROR tag is set to FAIL_ON_WARNINGS
+# then Doxygen will continue running as if WARN_AS_ERROR tag is set to NO, but
+# at the end of the Doxygen process Doxygen will return with a non-zero status.
+# If the WARN_AS_ERROR tag is set to FAIL_ON_WARNINGS_PRINT then Doxygen
behaves
+# like FAIL_ON_WARNINGS but in case no WARN_LOGFILE is defined Doxygen will not
+# write the warning messages in between other messages but write them at the
end
+# of a run, in case a WARN_LOGFILE is defined the warning messages will be
+# besides being in the defined file also be shown at the end of a run, unless
+# the WARN_LOGFILE is defined as - i.e. standard output (stdout) in that case
+# the behavior will remain as with the setting FAIL_ON_WARNINGS.
+# Possible values are: NO, YES, FAIL_ON_WARNINGS and FAIL_ON_WARNINGS_PRINT.
# The default value is: NO.
WARN_AS_ERROR = NO
-# The WARN_FORMAT tag determines the format of the warning messages that
doxygen
+# The WARN_FORMAT tag determines the format of the warning messages that
Doxygen
# can produce. The string should contain the $file, $line, and $text tags,
which
# will be replaced by the file and line number from which the warning
originated
# and the warning text. Optionally the format may contain $version, which will
# be replaced by the version of the file (if it could be obtained via
# FILE_VERSION_FILTER)
+# See also: WARN_LINE_FORMAT
# The default value is: $file:$line: $text.
-WARN_FORMAT = "$file:$line: $text "
+WARN_FORMAT = "$file:$line: $text "
+
+# In the $text part of the WARN_FORMAT command it is possible that a reference
+# to a more specific place is given. To make it easier to jump to this place
+# (outside of Doxygen) the user can define a custom "cut" / "paste" string.
+# Example:
+# WARN_LINE_FORMAT = "'vi $file +$line'"
+# See also: WARN_FORMAT
+# The default value is: at line $line of file $file.
+
+WARN_LINE_FORMAT = "at line $line of file $file"
# The WARN_LOGFILE tag can be used to specify a file to which warning and error
# messages should be written. If left blank the output is written to standard
-# error (stderr).
+# error (stderr). In case the file specified cannot be opened for writing the
+# warning and error messages are written to standard error. When as file - is
+# specified the warning and error messages are written to standard output
+# (stdout).
WARN_LOGFILE =
@@ -1061,29 +1245,42 @@ INPUT =
@srcdir@/doc/doxygen/doxygroups.cc \
include/ext/pb_ds/detail/unordered_iterator
# This tag can be used to specify the character encoding of the source files
-# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
+# that Doxygen parses. Internally Doxygen uses the UTF-8 encoding. Doxygen uses
# libiconv (or the iconv built into libc) for the transcoding. See the libiconv
-# documentation (see: https://www.gnu.org/software/libiconv/) for the list of
-# possible encodings.
+# documentation (see:
+# https://www.gnu.org/software/libiconv/) for the list of possible encodings.
+# See also: INPUT_FILE_ENCODING
# The default value is: UTF-8.
INPUT_ENCODING = UTF-8
+# This tag can be used to specify the character encoding of the source files
+# that Doxygen parses. The INPUT_FILE_ENCODING tag can be used to specify
+# character encoding on a per file pattern basis. Doxygen will compare the file
+# name with each pattern and apply the encoding instead of the default
+# INPUT_ENCODING if there is a match. The character encodings are a list of the
+# form: pattern=encoding (like *.php=ISO-8859-1).
+# See also: INPUT_ENCODING for further information on supported encodings.
+
+INPUT_FILE_ENCODING =
+
# If the value of the INPUT tag contains directories, you can use the
# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
# *.h) to filter out the source-files in the directories.
#
# Note that for custom extensions or not directly supported extensions you also
# need to set EXTENSION_MAPPING for the extension otherwise the files are not
-# read by doxygen.
+# read by Doxygen.
#
-# If left blank the following patterns are tested:*.c, *.cc, *.cxx, *.cpp,
-# *.c++, *.java, *.ii, *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h,
-# *.hh, *.hxx, *.hpp, *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc,
-# *.m, *.markdown, *.md, *.mm, *.dox (to be provided as doxygen C comment),
-# *.doc (to be provided as doxygen C comment), *.txt (to be provided as doxygen
-# C comment), *.py, *.pyw, *.f90, *.f95, *.f03, *.f08, *.f18, *.f, *.for,
*.vhd,
-# *.vhdl, *.ucf, *.qsf and *.ice.
+# Note the list of default checked file patterns might differ from the list of
+# default file extension mappings.
+#
+# If left blank the following patterns are tested:*.c, *.cc, *.cxx, *.cxxm,
+# *.cpp, *.cppm, *.ccm, *.c++, *.c++m, *.java, *.ii, *.ixx, *.ipp, *.i++,
*.inl,
+# *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp, *.h++, *.l, *.cs, *.d, *.php,
+# *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown, *.md, *.mm, *.dox (to be
+# provided as Doxygen C comment), *.py, *.pyw, *.f90, *.f95, *.f03, *.f08,
+# *.f18, *.f, *.for, *.vhd, *.vhdl, *.ucf, *.qsf and *.ice.
FILE_PATTERNS = *.h \
*.hpp \
@@ -1099,7 +1296,7 @@ RECURSIVE = NO
# excluded from the INPUT source files. This way you can easily exclude a
# subdirectory from a directory tree whose root is specified with the INPUT
tag.
#
-# Note that relative paths are relative to the directory from which doxygen is
+# Note that relative paths are relative to the directory from which Doxygen is
# run.
EXCLUDE = Makefile \
@@ -1131,8 +1328,8 @@ EXCLUDE_PATTERNS = stamp-* \
# (namespaces, classes, functions, etc.) that should be excluded from the
# output. The symbol name can be a fully qualified name, a word, or if the
# wildcard * is used, a substring. Examples: ANamespace, AClass,
-# AClass::ANamespace, ANamespace::*Test
-#
+# ANamespace::AClass, ANamespace::*Test
+
# Note that the wildcards are matched against the file with absolute path, so
to
# exclude all test directories use the pattern */test/*
@@ -1164,7 +1361,7 @@ EXAMPLE_RECURSIVE = NO
IMAGE_PATH =
-# The INPUT_FILTER tag can be used to specify a program that doxygen should
+# The INPUT_FILTER tag can be used to specify a program that Doxygen should
# invoke to filter for each input file. Doxygen will invoke the filter program
# by executing (via popen()) the command:
#
@@ -1179,9 +1376,14 @@ IMAGE_PATH =
# code is scanned, but not when the output code is generated. If lines are
added
# or removed, the anchors will not be placed correctly.
#
+# Note that Doxygen will use the data processed and written to standard output
+# for further processing, therefore nothing else, like debug statements or used
+# commands (so in case of a Windows batch file always use @echo OFF), should be
+# written to standard output.
+#
# Note that for custom extensions or not directly supported extensions you also
# need to set EXTENSION_MAPPING for the extension otherwise the files are not
-# properly processed by doxygen.
+# properly processed by Doxygen.
INPUT_FILTER =
@@ -1194,7 +1396,7 @@ INPUT_FILTER =
#
# Note that for custom extensions or not directly supported extensions you also
# need to set EXTENSION_MAPPING for the extension otherwise the files are not
-# properly processed by doxygen.
+# properly processed by Doxygen.
FILTER_PATTERNS =
@@ -1216,10 +1418,28 @@ FILTER_SOURCE_PATTERNS =
# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
# is part of the input, its contents will be placed on the main page
# (index.html). This can be useful if you have a project on for instance GitHub
-# and want to reuse the introduction page also for the doxygen output.
+# and want to reuse the introduction page also for the Doxygen output.
USE_MDFILE_AS_MAINPAGE =
+# If the IMPLICIT_DIR_DOCS tag is set to YES, any README.md file found in sub-
+# directories of the project's root, is used as the documentation for that sub-
+# directory, except when the README.md starts with a \dir, \page or \mainpage
+# command. If set to NO, the README.md file needs to start with an explicit
\dir
+# command in order to be used as directory documentation.
+# The default value is: YES.
+
+IMPLICIT_DIR_DOCS = YES
+
+# The Fortran standard specifies that for fixed formatted Fortran code all
+# characters from position 72 are to be considered as comment. A common
+# extension is to allow longer lines before the automatic comment starts. The
+# setting FORTRAN_COMMENT_AFTER will also make it possible that longer lines
can
+# be processed before the automatic comment starts.
+# Minimum value: 7, maximum value: 10000, default value: 72.
+
+FORTRAN_COMMENT_AFTER = 72
+
#---------------------------------------------------------------------------
# Configuration options related to source browsing
#---------------------------------------------------------------------------
@@ -1234,12 +1454,13 @@ USE_MDFILE_AS_MAINPAGE =
SOURCE_BROWSER = @do_html@
# Setting the INLINE_SOURCES tag to YES will include the body of functions,
-# classes and enums directly into the documentation.
+# multi-line macros, enums or list initialized variables directly into the
+# documentation.
# The default value is: NO.
INLINE_SOURCES = NO
-# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any
+# Setting the STRIP_CODE_COMMENTS tag to YES will instruct Doxygen to hide any
# special comment blocks from generated source code fragments. Normal C, C++
and
# Fortran comments will always remain visible.
# The default value is: YES.
@@ -1277,7 +1498,7 @@ REFERENCES_LINK_SOURCE = YES
SOURCE_TOOLTIPS = YES
# If the USE_HTAGS tag is set to YES then the references to source code will
-# point to the HTML generated by the htags(1) tool instead of doxygen built-in
+# point to the HTML generated by the htags(1) tool instead of Doxygen built-in
# source browser. The htags tool is part of GNU's global source tagging system
# (see https://www.gnu.org/software/global/global.html). You will need version
# 4.8.6 or higher.
@@ -1291,14 +1512,14 @@ SOURCE_TOOLTIPS = YES
# Doxygen will invoke htags (and that will in turn invoke gtags), so these
# tools must be available from the command line (i.e. in the search path).
#
-# The result: instead of the source browser generated by doxygen, the links to
+# The result: instead of the source browser generated by Doxygen, the links to
# source code will now point to the output of htags.
# The default value is: NO.
# This tag requires that the tag SOURCE_BROWSER is set to YES.
USE_HTAGS = NO
-# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a
+# If the VERBATIM_HEADERS tag is set the YES then Doxygen will generate a
# verbatim copy of the header file for each class for which an include is
# specified. Set to NO to disable this.
# See also: Section \class.
@@ -1317,10 +1538,11 @@ VERBATIM_HEADERS = NO
ALPHABETICAL_INDEX = YES
-# In case all classes in a project start with a common prefix, all classes will
-# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
-# can be used to specify a prefix (or a list of prefixes) that should be
ignored
-# while generating the index headers.
+# The IGNORE_PREFIX tag can be used to specify a prefix (or a list of prefixes)
+# that should be ignored while generating the index headers. The IGNORE_PREFIX
+# tag works for classes, function and member names. The entity will be placed
in
+# the alphabetical list under the first letter of the entity name that remains
+# after removing the prefix.
# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
IGNORE_PREFIX =
@@ -1329,7 +1551,7 @@ IGNORE_PREFIX =
# Configuration options related to the HTML output
#---------------------------------------------------------------------------
-# If the GENERATE_HTML tag is set to YES, doxygen will generate HTML output
+# If the GENERATE_HTML tag is set to YES, Doxygen will generate HTML output
# The default value is: YES.
GENERATE_HTML = @do_html@
@@ -1350,40 +1572,40 @@ HTML_OUTPUT = html
HTML_FILE_EXTENSION = .html
# The HTML_HEADER tag can be used to specify a user-defined HTML header file
for
-# each generated HTML page. If the tag is left blank doxygen will generate a
+# each generated HTML page. If the tag is left blank Doxygen will generate a
# standard header.
#
# To get valid HTML the header file that includes any scripts and style sheets
-# that doxygen needs, which is dependent on the configuration options used
(e.g.
+# that Doxygen needs, which is dependent on the configuration options used
(e.g.
# the setting GENERATE_TREEVIEW). It is highly recommended to start with a
# default header using
# doxygen -w html new_header.html new_footer.html new_stylesheet.css
# YourConfigFile
# and then modify the file new_header.html. See also section "Doxygen usage"
-# for information on how to generate the default header that doxygen normally
+# for information on how to generate the default header that Doxygen normally
# uses.
# Note: The header is subject to change so you typically have to regenerate the
-# default header when upgrading to a newer version of doxygen. For a
description
+# default header when upgrading to a newer version of Doxygen. For a
description
# of the possible markers and block names see the documentation.
# This tag requires that the tag GENERATE_HTML is set to YES.
HTML_HEADER =
# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for
each
-# generated HTML page. If the tag is left blank doxygen will generate a
standard
+# generated HTML page. If the tag is left blank Doxygen will generate a
standard
# footer. See HTML_HEADER for more information on how to generate a default
# footer and what special commands can be used inside the footer. See also
# section "Doxygen usage" for information on how to generate the default footer
-# that doxygen normally uses.
+# that Doxygen normally uses.
# This tag requires that the tag GENERATE_HTML is set to YES.
HTML_FOOTER =
# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
# sheet that is used by each HTML page. It can be used to fine-tune the look of
-# the HTML output. If left blank doxygen will generate a default style sheet.
+# the HTML output. If left blank Doxygen will generate a default style sheet.
# See also section "Doxygen usage" for information on how to generate the style
-# sheet that doxygen normally uses.
+# sheet that Doxygen normally uses.
# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as
# it is more robust and this tag (HTML_STYLESHEET) will in the future become
# obsolete.
@@ -1393,13 +1615,18 @@ HTML_STYLESHEET =
# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined
# cascading style sheets that are included after the standard style sheets
-# created by doxygen. Using this option one can overrule certain style aspects.
+# created by Doxygen. Using this option one can overrule certain style aspects.
# This is preferred over using HTML_STYLESHEET since it does not replace the
# standard style sheet and is therefore more robust against future updates.
# Doxygen will copy the style sheet files to the output directory.
# Note: The order of the extra style sheet files is of importance (e.g. the
last
# style sheet in the list overrules the setting of the previous ones in the
-# list). For an example see the documentation.
+# list).
+# Note: Since the styling of scrollbars can currently not be overruled in
+# Webkit/Chromium, the styling will be left out of the default doxygen.css if
+# one or more extra stylesheets have been specified. So if scrollbar
+# customization is desired it has to be added explicitly. For an example see
the
+# documentation.
# This tag requires that the tag GENERATE_HTML is set to YES.
HTML_EXTRA_STYLESHEET =
@@ -1414,9 +1641,22 @@ HTML_EXTRA_STYLESHEET =
HTML_EXTRA_FILES =
+# The HTML_COLORSTYLE tag can be used to specify if the generated HTML output
+# should be rendered with a dark or light theme.
+# Possible values are: LIGHT always generates light mode output, DARK always
+# generates dark mode output, AUTO_LIGHT automatically sets the mode according
+# to the user preference, uses light mode if no preference is set (the
default),
+# AUTO_DARK automatically sets the mode according to the user preference, uses
+# dark mode if no preference is set and TOGGLE allows a user to switch between
+# light and dark mode via a button.
+# The default value is: AUTO_LIGHT.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_COLORSTYLE = AUTO_LIGHT
+
# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
# will adjust the colors in the style sheet and background images according to
-# this color. Hue is specified as an angle on a colorwheel, see
+# this color. Hue is specified as an angle on a color-wheel, see
# https://en.wikipedia.org/wiki/Hue for more information. For instance the
value
# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
# purple, and 360 is red again.
@@ -1426,7 +1666,7 @@ HTML_EXTRA_FILES =
HTML_COLORSTYLE_HUE = 220
# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors
-# in the HTML output. For a value of 0 the output will use grayscales only. A
+# in the HTML output. For a value of 0 the output will use gray-scales only. A
# value of 255 will produce the most vivid colors.
# Minimum value: 0, maximum value: 255, default value: 100.
# This tag requires that the tag GENERATE_HTML is set to YES.
@@ -1444,15 +1684,6 @@ HTML_COLORSTYLE_SAT = 100
HTML_COLORSTYLE_GAMMA = 80
-# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated
HTML
-# page will contain the date and time when the page was generated. Setting this
-# to YES can help to show when doxygen was last run and thus if the
-# documentation is up to date.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_TIMESTAMP = NO
-
# If the HTML_DYNAMIC_MENUS tag is set to YES then the generated HTML
# documentation will contain a main index with vertical navigation menus that
# are dynamically created via JavaScript. If disabled, the navigation index
will
@@ -1472,6 +1703,33 @@ HTML_DYNAMIC_MENUS = YES
HTML_DYNAMIC_SECTIONS = NO
+# If the HTML_CODE_FOLDING tag is set to YES then classes and functions can be
+# dynamically folded and expanded in the generated HTML source code.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_CODE_FOLDING = YES
+
+# If the HTML_COPY_CLIPBOARD tag is set to YES then Doxygen will show an icon
in
+# the top right corner of code and text fragments that allows the user to copy
+# its content to the clipboard. Note this only works if supported by the
browser
+# and the web page is served via a secure context (see:
+# https://www.w3.org/TR/secure-contexts/), i.e. using the https: or file:
+# protocol.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_COPY_CLIPBOARD = YES
+
+# Doxygen stores a couple of settings persistently in the browser (via e.g.
+# cookies). By default these settings apply to all HTML pages generated by
+# Doxygen across all projects. The HTML_PROJECT_COOKIE tag can be used to store
+# the settings under a project specific key, such that the user preferences
will
+# be stored separately.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_PROJECT_COOKIE =
+
# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries
# shown in the various tree structured indices initially; the user can expand
# and collapse entries dynamically later on. Doxygen will expand the tree to
@@ -1487,10 +1745,11 @@ HTML_INDEX_NUM_ENTRIES = 0
# If the GENERATE_DOCSET tag is set to YES, additional index files will be
# generated that can be used as input for Apple's Xcode 3 integrated
development
-# environment (see: https://developer.apple.com/xcode/), introduced with OSX
-# 10.5 (Leopard). To create a documentation set, doxygen will generate a
-# Makefile in the HTML output directory. Running make will produce the docset
in
-# that directory and running make install will install the docset in
+# environment (see:
+# https://developer.apple.com/xcode/), introduced with OSX 10.5 (Leopard). To
+# create a documentation set, Doxygen will generate a Makefile in the HTML
+# output directory. Running make will produce the docset in that directory and
+# running make install will install the docset in
# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it
at
# startup. See
https://developer.apple.com/library/archive/featuredarticles/Doxy
# genXcode/_index.html for more information.
@@ -1507,6 +1766,13 @@ GENERATE_DOCSET = NO
DOCSET_FEEDNAME = "Doxygen generated docs"
+# This tag determines the URL of the docset feed. A documentation feed provides
+# an umbrella under which multiple documentation sets from a single provider
+# (such as a company or product suite) can be grouped.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_FEEDURL =
+
# This tag specifies a string that should uniquely identify the documentation
# set bundle. This should be a reverse domain-name style string, e.g.
# com.mycompany.MyDocSet. Doxygen will append .docset to the name.
@@ -1529,14 +1795,18 @@ DOCSET_PUBLISHER_ID = org.fsf
DOCSET_PUBLISHER_NAME = libstdc++
-# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
+# If the GENERATE_HTMLHELP tag is set to YES then Doxygen generates three
# additional HTML index files: index.hhp, index.hhc, and index.hhk. The
# index.hhp is a project file that can be read by Microsoft's HTML Help
Workshop
-# (see: https://www.microsoft.com/en-us/download/details.aspx?id=21138) on
-# Windows.
+# on Windows. In the beginning of 2021 Microsoft took the original page, with
+# a.o. the download links, offline (the HTML help workshop was already many
+# years in maintenance mode). You can download the HTML help workshop from the
+# web archives at Installation executable (see:
+#
http://web.archive.org/web/20160201063255/https://download.microsoft.com/downl
+# oad/0/A/9/0A939EF6-E31C-430F-A3DF-DFAE7960D564/htmlhelp.exe).
#
# The HTML Help Workshop contains a compiler that can convert all HTML output
-# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
+# generated by Doxygen into a single compiled HTML file (.chm). Compiled HTML
# files are now used as the Windows 98 help format, and will replace the old
# Windows help format (.hlp) on all Windows platforms in the future. Compressed
# HTML files also contain an index, a table of contents, and you can search for
@@ -1556,7 +1826,7 @@ CHM_FILE =
# The HHC_LOCATION tag can be used to specify the location (absolute path
# including file name) of the HTML help compiler (hhc.exe). If non-empty,
-# doxygen will try to run the HTML help compiler on the generated index.hhp.
+# Doxygen will try to run the HTML help compiler on the generated index.hhp.
# The file has to be specified with full path.
# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
@@ -1590,6 +1860,16 @@ BINARY_TOC = NO
TOC_EXPAND = NO
+# The SITEMAP_URL tag is used to specify the full URL of the place where the
+# generated documentation will be placed on the server by the user during the
+# deployment of the documentation. The generated sitemap is called sitemap.xml
+# and placed on the directory specified by HTML_OUTPUT. In case no SITEMAP_URL
+# is specified no sitemap is generated. For information about the sitemap
+# protocol see https://www.sitemaps.org
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+SITEMAP_URL =
+
# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that
# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help
@@ -1608,7 +1888,8 @@ QCH_FILE =
# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
# Project output. For more information please see Qt Help Project / Namespace
-# (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#namespace).
+# (see:
+# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#namespace).
# The default value is: org.doxygen.Project.
# This tag requires that the tag GENERATE_QHP is set to YES.
@@ -1616,7 +1897,8 @@ QHP_NAMESPACE = org.doxygen.Project
# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
# Help Project output. For more information please see Qt Help Project /
Virtual
-# Folders (see:
https://doc.qt.io/archives/qt-4.8/qthelpproject.html#virtual-folders).
+# Folders (see:
+# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#virtual-folders).
# The default value is: doc.
# This tag requires that the tag GENERATE_QHP is set to YES.
@@ -1624,14 +1906,16 @@ QHP_VIRTUAL_FOLDER = doc
# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
# filter to add. For more information please see Qt Help Project / Custom
-# Filters (see:
https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom-filters).
+# Filters (see:
+# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom-filters).
# This tag requires that the tag GENERATE_QHP is set to YES.
QHP_CUST_FILTER_NAME =
# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
# custom filter to add. For more information please see Qt Help Project /
Custom
-# Filters (see:
https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom-filters).
+# Filters (see:
+# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom-filters).
# This tag requires that the tag GENERATE_QHP is set to YES.
QHP_CUST_FILTER_ATTRS =
@@ -1643,9 +1927,9 @@ QHP_CUST_FILTER_ATTRS =
QHP_SECT_FILTER_ATTRS =
-# The QHG_LOCATION tag can be used to specify the location of Qt's
-# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
-# generated .qhp file.
+# The QHG_LOCATION tag can be used to specify the location (absolute path
+# including file name) of Qt's qhelpgenerator. If non-empty Doxygen will try to
+# run qhelpgenerator on the generated .qhp file.
# This tag requires that the tag GENERATE_QHP is set to YES.
QHG_LOCATION =
@@ -1688,18 +1972,39 @@ DISABLE_INDEX = YES
# to work a browser that supports JavaScript, DHTML, CSS and frames is required
# (i.e. any modern browser). Windows users are probably better off using the
# HTML help feature. Via custom style sheets (see HTML_EXTRA_STYLESHEET) one
can
-# further fine-tune the look of the index. As an example, the default style
-# sheet generated by doxygen has an example that shows how to put an image at
-# the root of the tree instead of the PROJECT_NAME. Since the tree basically
has
-# the same information as the tab index, you could consider setting
-# DISABLE_INDEX to YES when enabling this option.
-# The default value is: NO.
+# further fine tune the look of the index (see "Fine-tuning the output"). As an
+# example, the default style sheet generated by Doxygen has an example that
+# shows how to put an image at the root of the tree instead of the
PROJECT_NAME.
+# Since the tree basically has more details information than the tab index, you
+# could consider setting DISABLE_INDEX to YES when enabling this option.
+# The default value is: YES.
# This tag requires that the tag GENERATE_HTML is set to YES.
GENERATE_TREEVIEW = YES
+# When GENERATE_TREEVIEW is set to YES, the PAGE_OUTLINE_PANEL option
determines
+# if an additional navigation panel is shown at the right hand side of the
+# screen, displaying an outline of the contents of the main page, similar to
+# e.g. https://developer.android.com/reference If GENERATE_TREEVIEW is set to
+# NO, this option has no effect.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+PAGE_OUTLINE_PANEL = YES
+
+# When GENERATE_TREEVIEW is set to YES, the FULL_SIDEBAR option determines if
+# the side bar is limited to only the treeview area (value NO) or if it should
+# extend to the full height of the window (value YES). Setting this to YES
gives
+# a layout similar to e.g. https://docs.readthedocs.io with more room for
+# contents, but less room for the project logo, title, and description. If
+# GENERATE_TREEVIEW is set to NO, this option has no effect.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+FULL_SIDEBAR = NO
+
# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values
that
-# doxygen will group on one line in the generated HTML documentation.
+# Doxygen will group on one line in the generated HTML documentation.
#
# Note that a value of 0 will completely suppress the enum values from
appearing
# in the overview section.
@@ -1708,6 +2013,12 @@ GENERATE_TREEVIEW = YES
ENUM_VALUES_PER_LINE = 4
+# When the SHOW_ENUM_VALUES tag is set doxygen will show the specified
+# enumeration values besides the enumeration mnemonics.
+# The default value is: NO.
+
+SHOW_ENUM_VALUES = NO
+
# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used
# to set the initial width (in pixels) of the frame in which the tree is shown.
# Minimum value: 0, maximum value: 1500, default value: 250.
@@ -1715,14 +2026,21 @@ ENUM_VALUES_PER_LINE = 4
TREEVIEW_WIDTH = 250
-# If the EXT_LINKS_IN_WINDOW option is set to YES, doxygen will open links to
+# If the EXT_LINKS_IN_WINDOW option is set to YES, Doxygen will open links to
# external symbols imported via tag files in a separate window.
# The default value is: NO.
# This tag requires that the tag GENERATE_HTML is set to YES.
EXT_LINKS_IN_WINDOW = NO
-# If the HTML_FORMULA_FORMAT option is set to svg, doxygen will use the pdf2svg
+# If the OBFUSCATE_EMAILS tag is set to YES, Doxygen will obfuscate email
+# addresses.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+OBFUSCATE_EMAILS = YES
+
+# If the HTML_FORMULA_FORMAT option is set to svg, Doxygen will use the pdf2svg
# tool (see https://github.com/dawbarton/pdf2svg) or inkscape (see
# https://inkscape.org) to generate formulas as SVG images instead of PNGs for
# the HTML output. These images will generally look nicer at scaled
resolutions.
@@ -1735,7 +2053,7 @@ HTML_FORMULA_FORMAT = png
# Use this tag to change the font size of LaTeX formulas included as images in
# the HTML documentation. When you change the font size after a successful
-# doxygen run you need to manually remove any form_*.png images from the HTML
+# Doxygen run you need to manually remove any form_*.png images from the HTML
# output directory to force them to be regenerated.
# Minimum value: 8, maximum value: 50, default value: 10.
# This tag requires that the tag GENERATE_HTML is set to YES.
@@ -1759,50 +2077,90 @@ FORMULA_MACROFILE =
USE_MATHJAX = NO
+# With MATHJAX_VERSION it is possible to specify the MathJax version to be
used.
+# Note that the different versions of MathJax have different requirements with
+# regards to the different settings, so it is possible that also other MathJax
+# settings have to be changed when switching between the different MathJax
+# versions.
+# Possible values are: MathJax_2, MathJax_3 and MathJax_4.
+# The default value is: MathJax_2.
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_VERSION = MathJax_2
+
# When MathJax is enabled you can set the default output format to be used for
-# the MathJax output. See the MathJax site (see:
-# http://docs.mathjax.org/en/latest/output.html) for more details.
+# the MathJax output. For more details about the output format see MathJax
+# version 2 (see:
+# https://docs.mathjax.org/en/v2.7/output.html), MathJax version 3 (see:
+# https://docs.mathjax.org/en/v3.2/output/index.html) and MathJax version 4
+# (see:
+# https://docs.mathjax.org/en/v4.0/output/index.htm).
# Possible values are: HTML-CSS (which is slower, but has the best
-# compatibility), NativeMML (i.e. MathML) and SVG.
+# compatibility. This is the name for Mathjax version 2, for MathJax version 3
+# this will be translated into chtml), NativeMML (i.e. MathML. Only supported
+# for MathJax 2. For MathJax version 3 chtml will be used instead.), chtml
(This
+# is the name for Mathjax version 3, for MathJax version 2 this will be
+# translated into HTML-CSS) and SVG.
# The default value is: HTML-CSS.
# This tag requires that the tag USE_MATHJAX is set to YES.
MATHJAX_FORMAT = HTML-CSS
# When MathJax is enabled you need to specify the location relative to the HTML
-# output directory using the MATHJAX_RELPATH option. The destination directory
-# should contain the MathJax.js script. For instance, if the mathjax directory
-# is located at the same level as the HTML output directory, then
-# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
-# Content Delivery Network so you can quickly see the result without installing
-# MathJax. However, it is strongly recommended to install a local copy of
-# MathJax from https://www.mathjax.org before deployment.
-# The default value is: https://cdn.jsdelivr.net/npm/mathjax@2.
+# output directory using the MATHJAX_RELPATH option. For Mathjax version 2 the
+# destination directory should contain the MathJax.js script. For instance, if
+# the mathjax directory is located at the same level as the HTML output
+# directory, then MATHJAX_RELPATH should be ../mathjax. For Mathjax versions 3
+# and 4 the destination directory should contain the tex-<format>.js script
+# (where <format> is either chtml or svg). The default value points to the
+# MathJax Content Delivery Network so you can quickly see the result without
+# installing MathJax. However, it is strongly recommended to install a local
+# copy of MathJax from https://www.mathjax.org before deployment. The default
+# value is:
+# - in case of MathJax version 2: https://cdn.jsdelivr.net/npm/mathjax@2
+# - in case of MathJax version 3: https://cdn.jsdelivr.net/npm/mathjax@3
+# - in case of MathJax version 4: https://cdn.jsdelivr.net/npm/mathjax@4
# This tag requires that the tag USE_MATHJAX is set to YES.
MATHJAX_RELPATH = http://www.mathjax.org/mathjax
# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
# extension names that should be enabled during MathJax rendering. For example
+# for MathJax version 2 (see https://docs.mathjax.org/en/v2.7/tex.html):
# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
+# For example for MathJax version 3 (see
+# https://docs.mathjax.org/en/v3.2/input/tex/extensions/):
+# MATHJAX_EXTENSIONS = ams
+# For example for MathJax version 4 (see
+# https://docs.mathjax.org/en/v4.0/input/tex/extensions/):
+# MATHJAX_EXTENSIONS = units
+# Note that for Mathjax version 4 quite a few extensions are already
+# automatically loaded. To disable a package in Mathjax version 4 one can use
+# the package name prepended with a minus sign (- like MATHJAX_EXTENSIONS +=
+# -textmacros)
# This tag requires that the tag USE_MATHJAX is set to YES.
MATHJAX_EXTENSIONS =
-# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
-# of code that will be used on startup of the MathJax code. See the MathJax
site
-# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an
-# example see the documentation.
+# The MATHJAX_CODEFILE tag can be used to specify a file with JavaScript pieces
+# of code that will be used on startup of the MathJax code. See the Mathjax
site
+# for more details:
+# - MathJax version 2 (see:
+# https://docs.mathjax.org/en/v2.7/)
+# - MathJax version 3 (see:
+# https://docs.mathjax.org/en/v3.2/)
+# - MathJax version 4 (see:
+# https://docs.mathjax.org/en/v4.0/) For an example see the documentation.
# This tag requires that the tag USE_MATHJAX is set to YES.
MATHJAX_CODEFILE =
-# When the SEARCHENGINE tag is enabled doxygen will generate a search box for
-# the HTML output. The underlying search engine uses javascript and DHTML and
+# When the SEARCHENGINE tag is enabled Doxygen will generate a search box for
+# the HTML output. The underlying search engine uses JavaScript and DHTML and
# should work on any modern browser. Note that when using HTML help
# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET)
# there is already a search function so this one should typically be disabled.
-# For large projects the javascript based search engine can be slow, then
+# For large projects the JavaScript based search engine can be slow, then
# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to
# search using the keyboard; to jump to the search box use <access key> + S
# (what the <access key> is depends on the OS and browser, but it is typically
@@ -1821,7 +2179,7 @@ SEARCHENGINE = NO
# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
# implemented using a web server instead of a web client using JavaScript.
There
# are two flavors of web server based searching depending on the
EXTERNAL_SEARCH
-# setting. When disabled, doxygen will generate a PHP script for searching and
+# setting. When disabled, Doxygen will generate a PHP script for searching and
# an index file used by the script. When EXTERNAL_SEARCH is enabled the
indexing
# and searching needs to be provided by external tools. See the section
# "External Indexing and Searching" for details.
@@ -1830,7 +2188,7 @@ SEARCHENGINE = NO
SERVER_BASED_SEARCH = NO
-# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP
+# When EXTERNAL_SEARCH tag is enabled Doxygen will no longer generate the PHP
# script for searching. Instead the search results are written to an XML file
# which needs to be processed by an external indexer. Doxygen will invoke an
# external search engine pointed to by the SEARCHENGINE_URL option to obtain
the
@@ -1838,7 +2196,8 @@ SERVER_BASED_SEARCH = NO
#
# Doxygen ships with an example indexer (doxyindexer) and search engine
# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: https://xapian.org/).
+# Xapian (see:
+# https://xapian.org/).
#
# See the section "External Indexing and Searching" for details.
# The default value is: NO.
@@ -1851,8 +2210,9 @@ EXTERNAL_SEARCH = NO
#
# Doxygen ships with an example indexer (doxyindexer) and search engine
# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: https://xapian.org/). See the section "External Indexing and
-# Searching" for details.
+# Xapian (see:
+# https://xapian.org/). See the section "External Indexing and Searching" for
+# details.
# This tag requires that the tag SEARCHENGINE is set to YES.
SEARCHENGINE_URL =
@@ -1873,7 +2233,7 @@ SEARCHDATA_FILE = searchdata.xml
EXTERNAL_SEARCH_ID =
-# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
+# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through Doxygen
# projects other than the one defined by this configuration file, but that are
# all added to the same external search index. Each project needs to have a
# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of
@@ -1887,7 +2247,7 @@ EXTRA_SEARCH_MAPPINGS =
# Configuration options related to the LaTeX output
#---------------------------------------------------------------------------
-# If the GENERATE_LATEX tag is set to YES, doxygen will generate LaTeX output.
+# If the GENERATE_LATEX tag is set to YES, Doxygen will generate LaTeX output.
# The default value is: YES.
GENERATE_LATEX = @do_latex@
@@ -1932,7 +2292,7 @@ MAKEINDEX_CMD_NAME = makeindex
LATEX_MAKEINDEX_CMD = makeindex
-# If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX
+# If the COMPACT_LATEX tag is set to YES, Doxygen generates more compact LaTeX
# documents. This may be useful for small projects and may help to save some
# trees in general.
# The default value is: NO.
@@ -1961,36 +2321,38 @@ PAPER_TYPE = letter
EXTRA_PACKAGES = amsmath
-# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
-# generated LaTeX document. The header should contain everything until the
first
-# chapter. If it is left blank doxygen will generate a standard header. See
-# section "Doxygen usage" for information on how to let doxygen write the
-# default header to a separate file.
+# The LATEX_HEADER tag can be used to specify a user-defined LaTeX header for
+# the generated LaTeX document. The header should contain everything until the
+# first chapter. If it is left blank Doxygen will generate a standard header.
It
+# is highly recommended to start with a default header using
+# doxygen -w latex new_header.tex new_footer.tex new_stylesheet.sty
+# and then modify the file new_header.tex. See also section "Doxygen usage" for
+# information on how to generate the default header that Doxygen normally uses.
#
-# Note: Only use a user-defined header if you know what you are doing! The
-# following commands have a special meaning inside the header: $title,
-# $datetime, $date, $doxygenversion, $projectname, $projectnumber,
-# $projectbrief, $projectlogo. Doxygen will replace $title with the empty
-# string, for the replacement values of the other commands the user is referred
-# to HTML_HEADER.
+# Note: Only use a user-defined header if you know what you are doing!
+# Note: The header is subject to change so you typically have to regenerate the
+# default header when upgrading to a newer version of Doxygen. The following
+# commands have a special meaning inside the header (and footer): For a
+# description of the possible markers and block names see the documentation.
# This tag requires that the tag GENERATE_LATEX is set to YES.
LATEX_HEADER =
-# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
-# generated LaTeX document. The footer should contain everything after the last
-# chapter. If it is left blank doxygen will generate a standard footer. See
+# The LATEX_FOOTER tag can be used to specify a user-defined LaTeX footer for
+# the generated LaTeX document. The footer should contain everything after the
+# last chapter. If it is left blank Doxygen will generate a standard footer.
See
# LATEX_HEADER for more information on how to generate a default footer and
what
-# special commands can be used inside the footer.
-#
-# Note: Only use a user-defined footer if you know what you are doing!
+# special commands can be used inside the footer. See also section "Doxygen
+# usage" for information on how to generate the default footer that Doxygen
+# normally uses. Note: Only use a user-defined footer if you know what you are
+# doing!
# This tag requires that the tag GENERATE_LATEX is set to YES.
LATEX_FOOTER =
# The LATEX_EXTRA_STYLESHEET tag can be used to specify additional user-defined
# LaTeX style sheets that are included after the standard style sheets created
-# by doxygen. Using this option one can overrule certain style aspects. Doxygen
+# by Doxygen. Using this option one can overrule certain style aspects. Doxygen
# will copy the style sheet files to the output directory.
# Note: The order of the extra style sheet files is of importance (e.g. the
last
# style sheet in the list overrules the setting of the previous ones in the
@@ -2016,7 +2378,7 @@ LATEX_EXTRA_FILES =
PDF_HYPERLINKS = YES
-# If the USE_PDFLATEX tag is set to YES, doxygen will use the engine as
+# If the USE_PDFLATEX tag is set to YES, Doxygen will use the engine as
# specified with LATEX_CMD_NAME to generate the PDF file directly from the
LaTeX
# files. Set this option to YES, to get a higher quality PDF documentation.
#
@@ -2026,16 +2388,22 @@ PDF_HYPERLINKS = YES
USE_PDFLATEX = YES
-# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode
-# command to the generated LaTeX files. This will instruct LaTeX to keep
running
-# if errors occur, instead of asking the user for help. This option is also
used
-# when generating formulas in HTML.
+# The LATEX_BATCHMODE tag signals the behavior of LaTeX in case of an error.
+# Possible values are: NO same as ERROR_STOP, YES same as BATCH, BATCH In batch
+# mode nothing is printed on the terminal, errors are scrolled as if <return>
is
+# hit at every error; missing files that TeX tries to input or request from
+# keyboard input (\read on a not open input stream) cause the job to abort,
+# NON_STOP In nonstop mode the diagnostic message will appear on the terminal,
+# but there is no possibility of user interaction just like in batch mode,
+# SCROLL In scroll mode, TeX will stop only for missing files to input or if
+# keyboard input is necessary and ERROR_STOP In errorstop mode, TeX will stop
at
+# each error, asking for user intervention.
# The default value is: NO.
# This tag requires that the tag GENERATE_LATEX is set to YES.
LATEX_BATCHMODE = YES
-# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the
+# If the LATEX_HIDE_INDICES tag is set to YES then Doxygen will not include the
# index chapters (such as File Index, Compound Index, etc.) in the output.
# The default value is: NO.
# This tag requires that the tag GENERATE_LATEX is set to YES.
@@ -2045,19 +2413,11 @@ LATEX_HIDE_INDICES = YES
# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
# bibliography, e.g. plainnat, or ieeetr. See
# https://en.wikipedia.org/wiki/BibTeX and \cite for more info.
-# The default value is: plain.
+# The default value is: plainnat.
# This tag requires that the tag GENERATE_LATEX is set to YES.
LATEX_BIB_STYLE = plain
-# If the LATEX_TIMESTAMP tag is set to YES then the footer of each generated
-# page will contain the date and time when the page was generated. Setting this
-# to NO can help when comparing the output of multiple runs.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_TIMESTAMP = NO
-
# The LATEX_EMOJI_DIRECTORY tag is used to specify the (relative or absolute)
# path from which the emoji images will be read. If a relative path is entered,
# it will be relative to the LATEX_OUTPUT directory. If left blank the
@@ -2070,7 +2430,7 @@ LATEX_EMOJI_DIRECTORY =
# Configuration options related to the RTF output
#---------------------------------------------------------------------------
-# If the GENERATE_RTF tag is set to YES, doxygen will generate RTF output. The
+# If the GENERATE_RTF tag is set to YES, Doxygen will generate RTF output. The
# RTF output is optimized for Word 97 and may not look too pretty with other
RTF
# readers/editors.
# The default value is: NO.
@@ -2085,7 +2445,7 @@ GENERATE_RTF = NO
RTF_OUTPUT = rtf
-# If the COMPACT_RTF tag is set to YES, doxygen generates more compact RTF
+# If the COMPACT_RTF tag is set to YES, Doxygen generates more compact RTF
# documents. This may be useful for small projects and may help to save some
# trees in general.
# The default value is: NO.
@@ -2105,28 +2465,36 @@ COMPACT_RTF = NO
RTF_HYPERLINKS = NO
-# Load stylesheet definitions from file. Syntax is similar to doxygen's
+# Load stylesheet definitions from file. Syntax is similar to Doxygen's
# configuration file, i.e. a series of assignments. You only have to provide
# replacements, missing definitions are set to their default value.
#
# See also section "Doxygen usage" for information on how to generate the
-# default style sheet that doxygen normally uses.
+# default style sheet that Doxygen normally uses.
# This tag requires that the tag GENERATE_RTF is set to YES.
RTF_STYLESHEET_FILE =
# Set optional variables used in the generation of an RTF document. Syntax is
-# similar to doxygen's configuration file. A template extensions file can be
+# similar to Doxygen's configuration file. A template extensions file can be
# generated using doxygen -e rtf extensionFile.
# This tag requires that the tag GENERATE_RTF is set to YES.
RTF_EXTENSIONS_FILE =
+# The RTF_EXTRA_FILES tag can be used to specify one or more extra images or
+# other source files which should be copied to the RTF_OUTPUT output directory.
+# Note that the files will be copied as-is; there are no commands or markers
+# available.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_EXTRA_FILES =
+
#---------------------------------------------------------------------------
# Configuration options related to the man page output
#---------------------------------------------------------------------------
-# If the GENERATE_MAN tag is set to YES, doxygen will generate man pages for
+# If the GENERATE_MAN tag is set to YES, Doxygen will generate man pages for
# classes and files.
# The default value is: NO.
@@ -2157,7 +2525,7 @@ MAN_EXTENSION = .3
MAN_SUBDIR =
-# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it
+# If the MAN_LINKS tag is set to YES and Doxygen generates man output, then it
# will generate one additional man file for each entity documented in the real
# man page(s). These additional files only source the real man page, but
without
# them the man command would be unable to find the correct page.
@@ -2170,7 +2538,7 @@ MAN_LINKS = NO
# Configuration options related to the XML output
#---------------------------------------------------------------------------
-# If the GENERATE_XML tag is set to YES, doxygen will generate an XML file that
+# If the GENERATE_XML tag is set to YES, Doxygen will generate an XML file that
# captures the structure of the code including all documentation.
# The default value is: NO.
@@ -2184,7 +2552,7 @@ GENERATE_XML = @do_xml@
XML_OUTPUT = xml
-# If the XML_PROGRAMLISTING tag is set to YES, doxygen will dump the program
+# If the XML_PROGRAMLISTING tag is set to YES, Doxygen will dump the program
# listings (including syntax highlighting and cross-referencing information) to
# the XML output. Note that enabling this will significantly increase the size
# of the XML output.
@@ -2193,7 +2561,7 @@ XML_OUTPUT = xml
XML_PROGRAMLISTING = NO
-# If the XML_NS_MEMB_FILE_SCOPE tag is set to YES, doxygen will include
+# If the XML_NS_MEMB_FILE_SCOPE tag is set to YES, Doxygen will include
# namespace members in file scope as well, matching the HTML output.
# The default value is: NO.
# This tag requires that the tag GENERATE_XML is set to YES.
@@ -2204,7 +2572,7 @@ XML_NS_MEMB_FILE_SCOPE = NO
# Configuration options related to the DOCBOOK output
#---------------------------------------------------------------------------
-# If the GENERATE_DOCBOOK tag is set to YES, doxygen will generate Docbook
files
+# If the GENERATE_DOCBOOK tag is set to YES, Doxygen will generate Docbook
files
# that can be used to generate PDF.
# The default value is: NO.
@@ -2222,19 +2590,45 @@ DOCBOOK_OUTPUT = docbook
# Configuration options for the AutoGen Definitions output
#---------------------------------------------------------------------------
-# If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an
-# AutoGen Definitions (see http://autogen.sourceforge.net/) file that captures
+# If the GENERATE_AUTOGEN_DEF tag is set to YES, Doxygen will generate an
+# AutoGen Definitions (see https://autogen.sourceforge.net/) file that captures
# the structure of the code including all documentation. Note that this feature
# is still experimental and incomplete at the moment.
# The default value is: NO.
GENERATE_AUTOGEN_DEF = NO
+#---------------------------------------------------------------------------
+# Configuration options related to Sqlite3 output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_SQLITE3 tag is set to YES Doxygen will generate a Sqlite3
+# database with symbols found by Doxygen stored in tables.
+# The default value is: NO.
+
+GENERATE_SQLITE3 = NO
+
+# The SQLITE3_OUTPUT tag is used to specify where the Sqlite3 database will be
+# put. If a relative path is entered the value of OUTPUT_DIRECTORY will be put
+# in front of it.
+# The default directory is: sqlite3.
+# This tag requires that the tag GENERATE_SQLITE3 is set to YES.
+
+SQLITE3_OUTPUT = sqlite3
+
+# The SQLITE3_RECREATE_DB tag is set to YES, the existing doxygen_sqlite3.db
+# database file will be recreated with each Doxygen run. If set to NO, Doxygen
+# will warn if a database file is already found and not modify it.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_SQLITE3 is set to YES.
+
+SQLITE3_RECREATE_DB = YES
+
#---------------------------------------------------------------------------
# Configuration options related to the Perl module output
#---------------------------------------------------------------------------
-# If the GENERATE_PERLMOD tag is set to YES, doxygen will generate a Perl
module
+# If the GENERATE_PERLMOD tag is set to YES, Doxygen will generate a Perl
module
# file that captures the structure of the code including all documentation.
#
# Note that this feature is still experimental and incomplete at the moment.
@@ -2242,7 +2636,7 @@ GENERATE_AUTOGEN_DEF = NO
GENERATE_PERLMOD = NO
-# If the PERLMOD_LATEX tag is set to YES, doxygen will generate the necessary
+# If the PERLMOD_LATEX tag is set to YES, Doxygen will generate the necessary
# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and
DVI
# output from the Perl module output.
# The default value is: NO.
@@ -2272,13 +2666,13 @@ PERLMOD_MAKEVAR_PREFIX =
# Configuration options related to the preprocessor
#---------------------------------------------------------------------------
-# If the ENABLE_PREPROCESSING tag is set to YES, doxygen will evaluate all
+# If the ENABLE_PREPROCESSING tag is set to YES, Doxygen will evaluate all
# C-preprocessor directives found in the sources and include files.
# The default value is: YES.
ENABLE_PREPROCESSING = YES
-# If the MACRO_EXPANSION tag is set to YES, doxygen will expand all macro names
+# If the MACRO_EXPANSION tag is set to YES, Doxygen will expand all macro names
# in the source code. If set to NO, only conditional compilation will be
# performed. Macro expansion can be done in a controlled way by setting
# EXPAND_ONLY_PREDEF to YES.
@@ -2304,7 +2698,8 @@ SEARCH_INCLUDES = YES
# The INCLUDE_PATH tag can be used to specify one or more directories that
# contain include files that are not input files but should be processed by the
-# preprocessor.
+# preprocessor. Note that the INCLUDE_PATH is not recursive, so the setting of
+# RECURSIVE has no effect here.
# This tag requires that the tag SEARCH_INCLUDES is set to YES.
INCLUDE_PATH = include
@@ -2429,7 +2824,7 @@ PREDEFINED = __cplusplus=202002L \
EXPAND_AS_DEFINED =
-# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor
will
+# If the SKIP_FUNCTION_MACROS tag is set to YES then Doxygen's preprocessor
will
# remove all references to function-like macros that are alone on a line, have
# an all uppercase name, and do not end with a semicolon. Such function macros
# are typically used for boiler-plate code, and will confuse the parser if not
@@ -2453,26 +2848,26 @@ SKIP_FUNCTION_MACROS = YES
# section "Linking to external documentation" for more information about the
use
# of tag files.
# Note: Each tag file must have a unique name (where the name does NOT include
-# the path). If a tag file is not located in the directory in which doxygen is
+# the path). If a tag file is not located in the directory in which Doxygen is
# run, you must also specify the path to the tagfile here.
TAGFILES =
-# When a file name is specified after GENERATE_TAGFILE, doxygen will create a
+# When a file name is specified after GENERATE_TAGFILE, Doxygen will create a
# tag file that is based on the input files it reads. See section "Linking to
# external documentation" for more information about the usage of tag files.
GENERATE_TAGFILE = @generate_tagfile@
-# If the ALLEXTERNALS tag is set to YES, all external class will be listed in
-# the class index. If set to NO, only the inherited external classes will be
-# listed.
+# If the ALLEXTERNALS tag is set to YES, all external classes and namespaces
+# will be listed in the class and namespace index. If set to NO, only the
+# inherited external classes will be listed.
# The default value is: NO.
ALLEXTERNALS = YES
# If the EXTERNAL_GROUPS tag is set to YES, all external groups will be listed
-# in the modules index. If set to NO, only the current project's groups will be
+# in the topic index. If set to NO, only the current project's groups will be
# listed.
# The default value is: YES.
@@ -2486,73 +2881,111 @@ EXTERNAL_GROUPS = YES
EXTERNAL_PAGES = YES
#---------------------------------------------------------------------------
-# Configuration options related to the dot tool
+# Configuration options related to diagram generator tools
#---------------------------------------------------------------------------
-# You can include diagrams made with dia in doxygen documentation. Doxygen will
-# then run dia to produce the diagram and insert it in the documentation. The
-# DIA_PATH tag allows you to specify the directory where the dia binary
resides.
-# If left empty dia is assumed to be found in the default search path.
-
-DIA_PATH =
-
# If set to YES the inheritance and collaboration graphs will hide inheritance
# and usage relations if the target is undocumented or is not a class.
# The default value is: YES.
HIDE_UNDOC_RELATIONS = NO
-# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
+# If you set the HAVE_DOT tag to YES then Doxygen will assume the dot tool is
# available from the path. This tool is part of Graphviz (see:
-# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
+# https://www.graphviz.org/), a graph visualization toolkit from AT&T and
Lucent
# Bell Labs. The other options in this section have no effect if this option is
# set to NO
# The default value is: NO.
HAVE_DOT = YES
-# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is
allowed
-# to run in parallel. When set to 0 doxygen will base this on the number of
+# The DOT_NUM_THREADS specifies the number of dot invocations Doxygen is
allowed
+# to run in parallel. When set to 0 Doxygen will base this on the number of
# processors available in the system. You can set it explicitly to a value
# larger than 0 to get control over the balance between CPU load and processing
# speed.
-# Minimum value: 0, maximum value: 32, default value: 0.
+# Minimum value: 0, maximum value: 512, default value: 0.
# This tag requires that the tag HAVE_DOT is set to YES.
DOT_NUM_THREADS = 0
-# By default doxygen will tell dot to use the default font as specified with
-# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set
-# the path where dot can find it using this tag.
+# DOT_COMMON_ATTR is common attributes for nodes, edges and labels of
+# subgraphs. When you want a differently looking font in the dot files that
+# Doxygen generates you can specify fontname, fontcolor and fontsize
attributes.
+# For details please see <a href=https://graphviz.org/doc/info/attrs.html>Node,
+# Edge and Graph Attributes specification</a> You need to make sure dot is able
+# to find the font, which can be done by putting it in a standard location or
by
+# setting the DOTFONTPATH environment variable or by setting DOT_FONTPATH to
the
+# directory containing the font. Default graphviz fontsize is 14.
+# The default value is: fontname=Helvetica,fontsize=10.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_COMMON_ATTR = "fontname=Helvetica,fontsize=10"
+
+# DOT_EDGE_ATTR is concatenated with DOT_COMMON_ATTR. For elegant style you can
+# add 'arrowhead=open, arrowtail=open, arrowsize=0.5'. <a
+# href=https://graphviz.org/doc/info/arrows.html>Complete documentation about
+# arrows shapes.</a>
+# The default value is: labelfontname=Helvetica,labelfontsize=10.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_EDGE_ATTR = "labelfontname=Helvetica,labelfontsize=10"
+
+# DOT_NODE_ATTR is concatenated with DOT_COMMON_ATTR. For view without boxes
+# around nodes set 'shape=plain' or 'shape=plaintext' <a
+# href=https://www.graphviz.org/doc/info/shapes.html>Shapes specification</a>
+# The default value is: shape=box,height=0.2,width=0.4.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_NODE_ATTR = "shape=box,height=0.2,width=0.4"
+
+# You can set the path where dot can find font specified with fontname in
+# DOT_COMMON_ATTR and others dot attributes.
# This tag requires that the tag HAVE_DOT is set to YES.
DOT_FONTPATH =
-# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
-# each documented class showing the direct and indirect inheritance relations.
-# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO.
+# If the CLASS_GRAPH tag is set to YES or GRAPH or BUILTIN then Doxygen will
+# generate a graph for each documented class showing the direct and indirect
+# inheritance relations. In case the CLASS_GRAPH tag is set to YES or GRAPH and
+# HAVE_DOT is enabled as well, then dot will be used to draw the graph. In case
+# the CLASS_GRAPH tag is set to YES and HAVE_DOT is disabled or if the
+# CLASS_GRAPH tag is set to BUILTIN, then the built-in generator will be used.
+# If the CLASS_GRAPH tag is set to TEXT the direct and indirect inheritance
+# relations will be shown as texts / links. Explicit enabling an inheritance
+# graph or choosing a different representation for an inheritance graph of a
+# specific class, can be accomplished by means of the command
\inheritancegraph.
+# Disabling an inheritance graph can be accomplished by means of the command
+# \hideinheritancegraph.
+# Possible values are: NO, YES, TEXT, GRAPH and BUILTIN.
# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
CLASS_GRAPH = YES
-# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a
+# If the COLLABORATION_GRAPH tag is set to YES then Doxygen will generate a
# graph for each documented class showing the direct and indirect
implementation
# dependencies (inheritance, containment, and class references variables) of
the
-# class with other documented classes.
+# class with other documented classes. Explicit enabling a collaboration graph,
+# when COLLABORATION_GRAPH is set to NO, can be accomplished by means of the
+# command \collaborationgraph. Disabling a collaboration graph can be
+# accomplished by means of the command \hidecollaborationgraph.
# The default value is: YES.
# This tag requires that the tag HAVE_DOT is set to YES.
COLLABORATION_GRAPH = NO
-# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
-# groups, showing the direct groups dependencies.
+# If the GROUP_GRAPHS tag is set to YES then Doxygen will generate a graph for
+# groups, showing the direct groups dependencies. Explicit enabling a group
+# dependency graph, when GROUP_GRAPHS is set to NO, can be accomplished by
means
+# of the command \groupgraph. Disabling a directory graph can be accomplished
by
+# means of the command \hidegroupgraph. See also the chapter Grouping in the
+# manual.
# The default value is: YES.
# This tag requires that the tag HAVE_DOT is set to YES.
GROUP_GRAPHS = YES
-# If the UML_LOOK tag is set to YES, doxygen will generate inheritance and
+# If the UML_LOOK tag is set to YES, Doxygen will generate inheritance and
# collaboration diagrams in a style similar to the OMG's Unified Modeling
# Language.
# The default value is: NO.
@@ -2569,10 +3002,41 @@ UML_LOOK = NO
# but if the number exceeds 15, the total amount of fields shown is limited to
# 10.
# Minimum value: 0, maximum value: 100, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
+# This tag requires that the tag UML_LOOK is set to YES.
UML_LIMIT_NUM_FIELDS = 10
+# If the UML_LOOK tag is enabled, field labels are shown along the edge between
+# two class nodes. If there are many fields and many nodes the graph may become
+# too cluttered. The UML_MAX_EDGE_LABELS threshold limits the number of items
to
+# make the size more manageable. Set this to 0 for no limit.
+# Minimum value: 0, maximum value: 100, default value: 10.
+# This tag requires that the tag UML_LOOK is set to YES.
+
+UML_MAX_EDGE_LABELS = 10
+
+# If the DOT_UML_DETAILS tag is set to NO, Doxygen will show attributes and
+# methods without types and arguments in the UML graphs. If the DOT_UML_DETAILS
+# tag is set to YES, Doxygen will add type and arguments for attributes and
+# methods in the UML graphs. If the DOT_UML_DETAILS tag is set to NONE, Doxygen
+# will not generate fields with class member information in the UML graphs. The
+# class diagrams will look similar to the default class diagrams but using UML
+# notation for the relationships.
+# Possible values are: NO, YES and NONE.
+# The default value is: NO.
+# This tag requires that the tag UML_LOOK is set to YES.
+
+DOT_UML_DETAILS = NO
+
+# The DOT_WRAP_THRESHOLD tag can be used to set the maximum number of
characters
+# to display on a single line. If the actual line length exceeds this threshold
+# significantly it will be wrapped across multiple lines. Some heuristics are
+# applied to avoid ugly line breaks.
+# Minimum value: 0, maximum value: 1000, default value: 17.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_WRAP_THRESHOLD = 17
+
# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
# collaboration graphs will show the relations between templates and their
# instances.
@@ -2582,24 +3046,29 @@ UML_LIMIT_NUM_FIELDS = 10
TEMPLATE_RELATIONS = NO
# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set
to
-# YES then doxygen will generate a graph for each documented file showing the
+# YES then Doxygen will generate a graph for each documented file showing the
# direct and indirect include dependencies of the file with other documented
-# files.
+# files. Explicit enabling an include graph, when INCLUDE_GRAPH is is set to
NO,
+# can be accomplished by means of the command \includegraph. Disabling an
+# include graph can be accomplished by means of the command \hideincludegraph.
# The default value is: YES.
# This tag requires that the tag HAVE_DOT is set to YES.
INCLUDE_GRAPH = NO
# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are
-# set to YES then doxygen will generate a graph for each documented file
showing
+# set to YES then Doxygen will generate a graph for each documented file
showing
# the direct and indirect include dependencies of the file with other
documented
-# files.
+# files. Explicit enabling an included by graph, when INCLUDED_BY_GRAPH is set
+# to NO, can be accomplished by means of the command \includedbygraph.
Disabling
+# an included by graph can be accomplished by means of the command
+# \hideincludedbygraph.
# The default value is: YES.
# This tag requires that the tag HAVE_DOT is set to YES.
INCLUDED_BY_GRAPH = NO
-# If the CALL_GRAPH tag is set to YES then doxygen will generate a call
+# If the CALL_GRAPH tag is set to YES then Doxygen will generate a call
# dependency graph for every global function or class method.
#
# Note that enabling this option will significantly increase the time of a run.
@@ -2611,7 +3080,7 @@ INCLUDED_BY_GRAPH = NO
CALL_GRAPH = NO
-# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller
+# If the CALLER_GRAPH tag is set to YES then Doxygen will generate a caller
# dependency graph for every global function or class method.
#
# Note that enabling this option will significantly increase the time of a run.
@@ -2623,44 +3092,59 @@ CALL_GRAPH = NO
CALLER_GRAPH = NO
-# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical
+# If the GRAPHICAL_HIERARCHY tag is set to YES then Doxygen will graphical
# hierarchy of all classes instead of a textual one.
# The default value is: YES.
# This tag requires that the tag HAVE_DOT is set to YES.
GRAPHICAL_HIERARCHY = YES
-# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the
+# If the DIRECTORY_GRAPH tag is set to YES then Doxygen will show the
# dependencies a directory has on other directories in a graphical way. The
# dependency relations are determined by the #include relations between the
-# files in the directories.
+# files in the directories. Explicit enabling a directory graph, when
+# DIRECTORY_GRAPH is set to NO, can be accomplished by means of the command
+# \directorygraph. Disabling a directory graph can be accomplished by means of
+# the command \hidedirectorygraph.
# The default value is: YES.
# This tag requires that the tag HAVE_DOT is set to YES.
DIRECTORY_GRAPH = NO
+# The DIR_GRAPH_MAX_DEPTH tag can be used to limit the maximum number of levels
+# of child directories generated in directory dependency graphs by dot.
+# Minimum value: 1, maximum value: 25, default value: 1.
+# This tag requires that the tag DIRECTORY_GRAPH is set to YES.
+
+DIR_GRAPH_MAX_DEPTH = 1
+
# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
# generated by dot. For an explanation of the image formats see the section
# output formats in the documentation of the dot tool (Graphviz (see:
-# http://www.graphviz.org/)).
-# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
-# to make the SVG files visible in IE 9+ (other browsers do not have this
-# requirement).
+# https://www.graphviz.org/)).
+#
+# Note the formats svg:cairo and svg:cairo:cairo cannot be used in combination
+# with INTERACTIVE_SVG (the INTERACTIVE_SVG will be set to NO).
# Possible values are: png, jpg, gif, svg, png:gd, png:gd:gd, png:cairo,
-# png:cairo:gd, png:cairo:cairo, png:cairo:gdiplus, png:gdiplus and
-# png:gdiplus:gdiplus.
+# png:cairo:gd, png:cairo:cairo, png:cairo:gdiplus, png:gdiplus,
+# png:gdiplus:gdiplus, svg:cairo, svg:cairo:cairo, svg:svg, svg:svg:core,
+# gif:cairo, gif:cairo:gd, gif:cairo:gdiplus, gif:gdiplus, gif:gdiplus:gdiplus,
+# gif:gd, gif:gd:gd, jpg:cairo, jpg:cairo:gd, jpg:cairo:gdiplus, jpg:gd,
+# jpg:gd:gd, jpg:gdiplus and jpg:gdiplus:gdiplus.
# The default value is: png.
# This tag requires that the tag HAVE_DOT is set to YES.
DOT_IMAGE_FORMAT = svg
-# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
-# enable generation of interactive SVG images that allow zooming and panning.
+# If DOT_IMAGE_FORMAT is set to svg or svg:svg or svg:svg:core, then this
option
+# can be set to YES to enable generation of interactive SVG images that allow
+# zooming and panning.
#
# Note that this requires a modern browser other than Internet Explorer. Tested
# and working are Firefox, Chrome, Safari, and Opera.
-# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make
-# the SVG files visible. Older versions of IE do not have SVG support.
+#
+# Note This option will be automatically disabled when DOT_IMAGE_FORMAT is set
+# to svg:cairo or svg:cairo:cairo.
# The default value is: NO.
# This tag requires that the tag HAVE_DOT is set to YES.
@@ -2679,11 +3163,12 @@ DOT_PATH =
DOTFILE_DIRS =
-# The MSCFILE_DIRS tag can be used to specify one or more directories that
-# contain msc files that are included in the documentation (see the \mscfile
-# command).
+# You can include diagrams made with dia in Doxygen documentation. Doxygen will
+# then run dia to produce the diagram and insert it in the documentation. The
+# DIA_PATH tag allows you to specify the directory where the dia binary
resides.
+# If left empty dia is assumed to be found in the default search path.
-MSCFILE_DIRS =
+DIA_PATH =
# The DIAFILE_DIRS tag can be used to specify one or more directories that
# contain dia files that are included in the documentation (see the \diafile
@@ -2691,28 +3176,85 @@ MSCFILE_DIRS =
DIAFILE_DIRS =
-# When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the
-# path where java can find the plantuml.jar file. If left blank, it is assumed
-# PlantUML is not used or called during a preprocessing step. Doxygen will
-# generate a warning when it encounters a \startuml command in this case and
-# will not generate output for the diagram.
+# When using PlantUML, the PLANTUML_JAR_PATH tag should be used to specify the
+# path where java can find the plantuml.jar file or to the filename of jar file
+# to be used. If left blank, it is assumed PlantUML is not used or called
during
+# a preprocessing step. Doxygen will generate a warning when it encounters a
+# \startuml command in this case and will not generate output for the diagram.
PLANTUML_JAR_PATH =
-# When using plantuml, the PLANTUML_CFG_FILE tag can be used to specify a
-# configuration file for plantuml.
+# When using PlantUML, the PLANTUML_CFG_FILE tag can be used to specify a
+# configuration file for PlantUML.
PLANTUML_CFG_FILE =
-# When using plantuml, the specified paths are searched for files specified by
-# the !include statement in a plantuml block.
+# When using PlantUML, the specified paths are searched for files specified by
+# the !include statement in a PlantUML block.
PLANTUML_INCLUDE_PATH =
+# The PLANTUMLFILE_DIRS tag can be used to specify one or more directories that
+# contain PlantUml files that are included in the documentation (see the
+# \plantumlfile command).
+
+PLANTUMLFILE_DIRS =
+
+# When using Mermaid diagrams with CLI rendering, the MERMAID_PATH tag should
be
+# used to specify the directory where the mmdc (Mermaid CLI) executable can be
+# found. If left blank, CLI-based rendering is disabled. For HTML output,
+# client-side rendering via JavaScript is used by default and does not require
+# mmdc. For LaTeX/PDF output, mmdc is required to pre-generate images. Doxygen
+# will generate a warning when CLI rendering is needed but mmdc is not
+# available.
+
+MERMAID_PATH =
+
+# When using Mermaid diagrams, the MERMAID_CONFIG_FILE tag can be used to
+# specify a JSON configuration file for the Mermaid CLI tool (mmdc). This file
+# can contain theme settings and other Mermaid configuration options.
+
+MERMAID_CONFIG_FILE =
+
+# The MERMAID_RENDER_MODE tag selects how Mermaid diagrams are rendered.
+# Possible values are: AUTO Use client-side rendering for HTML and mmdc for
+# LaTeX/PDF and other formats. If MERMAID_PATH is not set, non-HTML diagrams
+# will produce a warning., CLI Use the mmdc tool to pre-generate images
+# (requires Node.js and mermaid-js/mermaid-cli). Works for all output formats.
+# and CLIENT_SIDE Embed mermaid.js in HTML output for client-side rendering.
+# Does not require mmdc but only works for HTML output..
+# The default value is: AUTO.
+
+MERMAID_RENDER_MODE = AUTO
+
+# The MERMAID_JS_URL tag specifies the URL to load mermaid.js from when using
+# client-side rendering (MERMAID_RENDER_MODE is CLIENT_SIDE or AUTO). The
+# default points to the latest Mermaid v11 release on the jsDelivr CDN.
+# Examples:
+# - Latest v11 (default):
+# 'https://cdn.jsdelivr.net/npm/mermaid@11/dist/mermaid.esm.min.mjs'
+# - Pinned version:
+# 'https://cdn.jsdelivr.net/npm/[email protected]/dist/mermaid.esm.min.mjs'
+# - Local copy: './mermaid.esm.min.mjs' (user must place file in HTML output
+# directory)
+# The default CDN URL requires internet access when viewing the generated
+# documentation. For offline use, download mermaid.esm.min.mjs and set this to
a
+# relative path, or use MERMAID_RENDER_MODE=CLI to pre-generate images instead.
+# The default value is:
+# https://cdn.jsdelivr.net/npm/mermaid@11/dist/mermaid.esm.min.mjs.
+
+MERMAID_JS_URL =
https://cdn.jsdelivr.net/npm/mermaid@11/dist/mermaid.esm.min.mjs
+
+# The MERMAIDFILE_DIRS tag can be used to specify one or more directories that
+# contain Mermaid files that are included in the documentation (see the
+# \mermaidfile command).
+
+MERMAIDFILE_DIRS =
+
# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes
# that will be shown in the graph. If the number of nodes in a graph becomes
-# larger than this value, doxygen will truncate the graph, which is visualized
-# by representing a node as a red box. Note that doxygen if the number of
direct
+# larger than this value, Doxygen will truncate the graph, which is visualized
+# by representing a node as a red box. Note that if the number of direct
# children of the root node in a graph is already larger than
# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that
# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
@@ -2742,17 +3284,37 @@ MAX_DOT_GRAPH_DEPTH = 0
DOT_MULTI_TARGETS = YES
-# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
+# If the GENERATE_LEGEND tag is set to YES Doxygen will generate a legend page
# explaining the meaning of the various boxes and arrows in the dot generated
# graphs.
+# Note: This tag requires that UML_LOOK isn't set, i.e. the Doxygen internal
+# graphical representation for inheritance and collaboration diagrams is used.
# The default value is: YES.
# This tag requires that the tag HAVE_DOT is set to YES.
GENERATE_LEGEND = YES
-# If the DOT_CLEANUP tag is set to YES, doxygen will remove the intermediate
dot
+# If the DOT_CLEANUP tag is set to YES, Doxygen will remove the intermediate
# files that are used to generate the various graphs.
+#
+# Note: This setting is not only used for dot files but also for msc temporary
+# files.
# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
DOT_CLEANUP = YES
+
+# You can define message sequence charts within Doxygen comments using the \msc
+# command. If the MSCGEN_TOOL tag is left empty (the default), then Doxygen
will
+# use a built-in version of mscgen tool to produce the charts. Alternatively,
+# the MSCGEN_TOOL tag can also specify the name an external tool. For instance,
+# specifying prog as the value, Doxygen will call the tool as prog -T
+# <outfile_format> -o <outputfile> <inputfile>. The external tool should
support
+# output file formats "png", "eps", "svg", and "ismap".
+
+MSCGEN_TOOL =
+
+# The MSCFILE_DIRS tag can be used to specify one or more directories that
+# contain msc files that are included in the documentation (see the \mscfile
+# command).
+
+MSCFILE_DIRS =
--
2.53.0
